ERGOMOTION 390 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD ERGOMOTION 390 (01) PDF MANUAL


PDF Content Summary: OWNER’S MANUAL adjustable base installation & operation Thank you for purchasing an Ergomotion® adjustable bed base Protect your investment. Please register your warranty* at: http://www.ergomotion.com US/Canada customer service: 1-888-550-3746 *For International customers, please contact your retailer for customer service and warranty information. Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.

390 330 40+ 40+

table of contents Safety Precautions and Usage Statements All Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Parts List All Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Base Overview 390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 40+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick Reference Guide 390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 40+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installation Guide All Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 Remote Control 390 ......................................................................................12 330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 40+ ......................................................................................14 Setting Remote Custom Preset sand child lock safety feature 390/330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Bluetooth® Remote Control Setup 390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Headboard Bracket Installation Guide 390/330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 40+ ......................................................................................18 Emergency Power Down Box 390/330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Emergency Battery Backup 40+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Pair Remote 390/330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Setting Up Two Bases All Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Syncing Two Bases 390/330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 40+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 safety precautions and usage statements Attention: Important Safety Disclaimers Read all instructions before using your adjustable base. Save these instructions. To reduce the risk of shock, burns, fire or injury: • Always unplug the base from the electrical outlet before servicing any part of the base. To reduce risk of electric shock, unplug the base before cleaning. To safely disconnect, ensure the base is in a flat position with all motors off, and unplug from power source. • Keep the power cord away from heated surfaces. Never operate the base when the air openings are blocked. Keep air openings free of lint, hair and the like. Do not drop or insert any object into any opening. • Discontinue use of the bed base and contact a qualified service center if: it has a damaged cord or plug, if it is not working properly, or it has been dropped into water. • Only use this bed base for its intended use as described in this manual. Do not use accessories/ attachments that are not recommended by the manufacturer. • Close supervision is required when the bed base is used by or near children, convalescents or disabled persons.

Outlet Safety: For optimal safety and operation, plug bed base into a surge protector (not included). The bed base should only be plugged directly into a wall outlet or surge protector (strongly recommended). Improper connection of the equipment can result in the risk of electrical shock, electrical fire or faulty operation of this bed base. If the plug does not fit your outlet, contact a qualified electrician to install a suitable outlet. Unauthorized modification or failure to use a wall outlet or surge protector could void the electrical portion of your warranty. Warranty Warning: Do not open or tamper with control box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal workings of these components are tampered with. For complete warranty information visit www. ergomotion.com or refer to the warranty card included with the base. In-Home Use and Hospital Disclaimer: Ergomotion adjustable bed bases are designed solely for in-home use. This base was not designed as a hospital bed and is not designed to meet hospital standards. Do not use this base with TENT TYPE oxygen therapy equipment or near explosive gases. Pacemaker Notice: It is possible that some pacemakers may falsely interpret the optional massage feature vibrations as movement/ exercise. This is a common occurrence with any product that creates a vibrating movement and may not affect the pacemaker. Please consult your physician before using the massage feature. Pets and Small Children: Immediately dispose of all packing materials as it may pose a smothering risk to small children and pets. To avoid injury, it is not advised to allow children and small pets to play on or under the bed. Children should not operate the bed base without adult supervision. Safety Features: Casters (optional leg accessory) are equipped with locking wheels to prevent unwanted movement. Even when locked and unable to roll, it is possible for the casters to slide. Free release head and foot motors are designed to lower the mattress by retracting only with gravity, never pulling downwards, which minimizes pinch points. Product Ratings: The lift motors are not designed to operate continuously for more than [2] minutes in an [18] minute time period or approximately 10% duty cycle. Attempting to circumvent or exceed this rating will shorten the life expectancy of the product and may void the warranty. 1

2 safety precautions and usage statements Weight Limits: This product is not rated to support weights exceeding 650 for the 40+ or 850 pounds for the 330/390. This product is not rated to support weights in excess of 650/850 pounds inclusive of the mattress and bedding. The base will structurally support this weight, provided it is evenly distributed across the bed base. The adjustable base is not designed to support or lift this amount in the head or foot sections alone. Exceeding this weight restriction could damage the bed and/or cause injury and will void the warranty Acoustics: The massage function will emit a noticeable tone during operation. As the massage intensity level is increased, the tone will intensify. The volume of this tone is directly related to the location environment. For example, when demonstrated in a show room, the surrounding environmental noise will cover some of the massage noise. However, when installed in a home setting with wooden floors, carpeted or not, the massage volume will be more noticeable. In normal base operation, the wheels which allow the bed to maintain its distance from the wall, will make contact with the steel platform supports of the base creating a contact noise. When entering, exiting or shifting weight on the base, this contact noise may be audible as the wheels make contact. This is normal. SAVE THESE INSTRUCTIONS FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirement and void user’s right to operate the device. Radio Frequency: 2.4 GHz Fabric Care: To prolong the life of your fabric, protect from direct sunlight whenever possible. For spot cleaning, wipe area with a light damp sponge or vacuum with a soft brush attachment to remove particles. Keep at a minimum of 30cm (12 inches) away from direct heat sources. For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with a clean cloth dampened with warm water. Do not wet excessively. A soft bristle brush may be used to remove ingrained soil. Avoid scratching by gentle brushing. Wipe with a clean cloth dampened with warm water to remove residues. Dry in shade away from direct heat. If persistent marks remain visible after cleaning, seek professional advice. SAVE THESE INSTRUCTIONS FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirement and void user’s right to operate the device. Radio Frequency: 2.4 GHz

parts list All electronics and components that need to be installed are located in boxes under the base or attached to the frame. Before discarding the packing materials, ensure all the parts are accounted for. INCLUDED IN ALL SERIES: Mattress Retainer Bar Legs & Washers - [4] Power Cord Power Supply Connecting Strap ‡* INCLUDED IN ALL SERIES EXCEPT 40+: Wireless Remote & [3] AAA Batteries Power Down Box* SmartSyncTM Cord ‡ INCLUDED IN 40+ ONLY: Emergency Battery Wired Remote Pack Y-Cord ‡ OPTIONAL (NOT INCLUDED): Surge Protector 9V Batteries Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. 9/16” & 1/2” Socket and Crescent Wrench * These items are attached to the base for shipping purposes. Carefully remove from base and set aside. ‡ Only included in Twin, Twin Long, Queen Split and Cal King Split bases. 3

4 390 base overview Tilt Lumbar Motor Motor USB Port USB Port Head Massage MotorsUnderbed Lighting Underbed Lighting Underbed Lighting Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. Power Down Box Foot Motor Control Box Foot Massage Motors Head Motor

390 quick reference guide Not to scale. For illustration purposes only. Read all instructions before beginning installation.

Connection ports to all motors (installed under base) Connection to under- bed lighting (installed under the base) Connection to media Control Box VIBRATION faceplates (installed under the base) VIBRATION Power Cord Power Supply Input Power Cord Power Down Box LED Light 9V Batteries (not included) Bluetooth 4.0 5

6 330 base overview USB Ports* USB Ports* (optional) (optional) Control Box Foot Motor Bluetooth (optional) Splitter (optional) Power Down Box Head Motor USB Charger* (optional) * Available on select models. Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. Head Massage Foot Massage

330 quick reference guide Not to scale. For illustration purposes only. Read all instructions before beginning installation. Control Box Power Supply Connection ports to head and foot motors (massage and lift). Installed Power under the base. Cord Input Power Cord Power Down Box * Available on select models. Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. 9V Batteries (not included) 7

8 40+ base overview Head Motor Control Box Foot MotorActual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. 40+ quick reference guide Not to scale. For illustration purposes only. Read all instructions before beginning installation.

Head Motor Port Wired Remote Port Input Cord Connection Power LED Light Input Cord Connection Power LED Light Foot Motor Port Foot Motor Port Foot Motor Port 40+ CONTROL BOX OVERVIEW ELECTRONICS OVERVIEW Power Cord Head Motor Foot Motor Power Supply To remove control box, release metal clip and unplug cords. Input Power Cord Control Box Wired Remote (40+ Only) 9 10 installation guide To sync two bases with the SmartSyncTM (390/330): see detailed installation instructions on page 23. To sync two bases with the Y-Cord (40+): see detailed installation instructions on page 24. FOR 390/330 Place the bed base box in a desired location with the bottom of the box facing up. Remove the binding straps and packing materials, making sure not to puncture the box with any sharp objects. Uncoil the Power Down Box from the frame and install (2) 9 Volt batteries - optional, not included. Place box on the ground. Ensure that it is easily accessible when the base is turned to its upright position. For power down box operating instructions see page 19. STEP 2 FOR 40+ Locate the Backup Battery Pack and install (4) 9 Volt batteries (not included). Remove the bed base from the box keeping the bottom of the base facing upwards for easier access to the beds components STEP 3 Store the battery pack in a convenient location for emergency use. For battery backup operating instructions see page 20. To install the legs, thread the washer over the bolt of the leg with the recessed side facing the leg, and tighten by hand. Do not over tighten. Always use two people when setting up the base. STEP 1 STEP 4

STEP 5 To install headboard brackets: See detailed instructions on page 17 -18. Uncoil input cord (connected to control box’s power port) and plug into Power Supply. installation guide Always use two people when setting up the base. STEP 6 STEP 9 Uncoil the Power Cord and connect to the Power Supply. FOR 390/330 Place Power Supply on the ground and extend from Ensure that batteries are the base. correctly installed. Ensure that the Power Supply and all attached cords are directed toward the desired surge protector. STEP 7 Carefully flip the base over on to its legs. Important: Two people are required to move the bed base. Do not drag across the floor. Do not rest frame on its side, excessive pressure may damage the legs. Quickly test functions to verify proper setup before STEP 8 placing mattress on base. Use remote to return the base to a flat position. Plug the base into a power source. A surge protector is strongly recommended. STEP 10 Basic setup is now complete! See page 12-16 for remote control operating instructions. Locate the mattress retainer bar brackets. Slide the left side of the mattress retainer bar into the bracket. Pull the retainer bar to the opposite bracket and secure the right side. FOR 40+ Ensure the wired remote is plugged into the control box 11 12 390 remote control 10, 20, 30 Minute Massage Timer Lights Head Massage Up Foot (6 intensities) Turn on Head and Foot Massage Timer The HEAD arrows lift and lower the head section of the base. The FOOTarrows lift and lower the foot section of the base. The TILT arrows customize the level of head support. The LUMBAR arrows customize the level of lumbar support. Massage Up (6 intensities) Foot Massage Down (6 intensities) Head Massage Down (6 intensities) Turn on Head and Foot Massage Lifts and Lowers Head Lifts and Lowers Foot Under bed Lights On/Off Zero G® Preset Position Head Tilt Up/Down Lumbar Support Up/Down Relax Preset Position Flat Preset Position TV Preset Position MASSAGE FEATURE ADJUST ONE TOUCH BUTTONS The MASSAGE button activates head One touch ZERO G preset position. and foot massage at levels 1, 3, 6 and Zero-G adjusts your legs to a higher then turns head and foot massage off. level than your heart helping to relieve pressure off the lower back and The HEAD +/- buttons adjust the head promote circulation. massage intensities. Levels 1-6. One touch FLAT preset position. The FOOT +/- buttons adjust the head One touch TV preset position. massage intensities. Levels 1-6. One touch RELAX preset position. The TIMER/ALL OFF button Starts massage at level 3. Select a 10, 20 or 30 minute massage interval. Pressing a One touch LIGHT button activates and turns off the underbed lighting feature. fourth time will turn off massage. The light on the top of the remote indicates a 10, 20 or 30 minute timer setting. Massage will automatically shut off after 10 minutes if the massage timer isn’t set. Not to scale. For illustration purposes only. 330 remote control 10, 20, 30 Minute Massage Timer Lights Head Massage On/Off (6 Intensity) TV Preset Position Lifts and Lowers Head Zero G® Preset Position Foot Massage On/Off (6 Intensity) Relax Preset Position Turn on Head and Foot Massage The MASSAGE button activates head and foot massage at levels 1, 3, 6 and then turns head and foot massage off. The HEAD button will turn on the head massage. Cycle through 6 massage intensities. The FOOT button will turn on the foot massage. Cycle through 6 massage intensities. The TIMER/ALL OFF button Starts massage at level 3. Select a 10, 20 or 30 minute massage interval. Pressing a fourth time will turn off massage. The light on the top of the remote indicates a 10, 20 or 30 minute timer setting. Massage will automatically shut off after 10 minutes if the massage timer isn’t set. Turn on Head and Foot Massage Timer Flat Preset Position Lifts and Lowers Foot MASSAGE FEATURE ADJUST ONE TOUCH BUTTONS The HEAD arrows lift and lower the head section of the base. The FOOTarrows lift and lower the foot section of the base. To program custom presets: See instructions on page 15 One touch ZERO G preset position. Zero-G adjusts your legs to a higher level than your heart helping to relieve pressure off the lower back and promote circulation. One touch FLAT preset position. One touch TV preset position. One touch RELAX preset position. Not to scale. For illustration purposes only. 13

14 40+ remote control Not to scale. For illustration purposes only. Lifts and Lifts and Lowers Foot Lowers Head Flat Preset Position* ADJUST ONE TOUCH BUTTONS The HEAD arrows lift and lower the head section of the base. One touch FLAT  preset position. The FOOTarrows lift and lower the foot section of the base.

* Not all wired remotes are equipped with the flat feature. Product functionality may vary based on series specifications. setting safety feature remote custom presets* and child lock setting remote custom presets* Some bases have a programmable feature that allows you to save two custom positions. Please read all the instructions below before setting your custom presets on the remote. Available on select 330 models. Not available on the 40+. STEP 1 STEP 2 Articulate the head and foot to your desired position. FOR 330 : Press and hold one of the picture pre-set buttons [ ] for at least 10 seconds. The LED lights at top of remote will flash in succession 3 times. Position is now saved. NOTE: To restore the preset buttons back to their original factory settings, hold FLAT and ZERO-G simultaneously for at least 10 seconds. The original presets will be restored. To adjust the saved position, repeat steps 1 and 2 and the new position will be stored. * Available on select models. Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. child lock safety feature This function is used to lock the remote control to prevent unwanted base operation. Available on select 330/390 models. Not available on the 40+. To engage this locking feature, press the “Head up” button and “Head down” button simultaneously for 5 seconds until timer lights flash, then release the buttons. All button functions will be rendered inoperable with the exception of the remote program button. To return remote to normal operation, press the “Foot up” button and “Foot down” button simultaneously for 5 seconds until timer lights flash, then release the buttons. 15 16 bluetooth® remote control setup Available on select 330 and 390 models. Not available on the 40+. To operate the base from a smart device, the Ergomotion Remote application must be downloaded to the desired smart device from the App Store (Apple) or Google Play Store (Android). STEP 1 STEP 6 Plug the bed into power supply. Tap Select device. STEP 2 Open application. Input serial Number: First 7 digits of serial numer (Ignore Letters) You can find the serial number on the back cover of the manual. STEP 3 Select Menu icon. STEP 6 STEP 4 Select desired base. Tap back arrow to return to settings and select Remote to return to remote Select Settings control screen. from Menu screen. *See page 12-13 for remote instructions. STEP 5 NOTES: • If operating multiple bases: the Unique ID number will be listed on the sticker located on the adapter Select Bluetooth • Press and hold RESET for 5 seconds to reset customized presets V4.0 and "auto back to factory default settings. connect". • To disconnect: Turn off the Bluetooth® function on your device or select “Forget this Device” from your Bluetooth® settings menu. • For assistance establishing a Bluetooth® connection please refer to your device’s owners manual or contact the manufacturer directly. For assistance setting up a Bluetooth® connection, refer to your smart device's owners manual or contact the manufacturer directly. * Available on select models. Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual. headboard bracket installation guide (optional)

a.) Align the hole in the bracket to the brass sleeve into which the leg threads. Hold the bracket in place and screw the leg into the base until it is snug. DO NOT OVERTIGHTEN. Too much force may cause the leg to spin freely. b) Align the tab with the hole in the frame (located towards the foot of the base) and use a short bolt and nut to secure the bracket. Make sure the bolt is tight. Attach the plastic spacer and T-Bracket. a.) Measure the distance between the mounting holes on the headboard and install the spacer and attachment plate to accommodate the headboard. b.) To install the plastic spacer and attachment plate, you will need (2) long bolts and (2) nuts. Place the spacer and attachment plate in the desired location and slip the bolts through the holes with the head of the bolt facing outward. Position the bolts diagonally on the spacer. Use the 9/16” (14 mm) socket and wrench to tighten the bolts.

For Series 390/330 only. See page 18 for 40+ Headboard Bracket installation. Headboard Brackets are an optional accessory and may not be included. A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation. HEADBOARD BRACKET COMPONENTS Headboard Bracket (2) T-Bracket (2) Spacer (2) Long Bolt (8) Short Bolt (10) Nut (18) STEP 1 STEP 2 STEP 3 You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to secure it to the brackets. The heads of the bolts will face outward. Use a 9/16" (14mm) socket and 1/2" (13mm) wrench to tighten the bolts. 17 18 headboard bracket installation guide (optional)

a.) Align the hole in the bracket to the brass sleeve into which the leg threads. Hold the bracket in place and screw the leg into the base until it is snug. DO NOT OVERTIGHTEN. Too much force may cause the leg to spin freely. b) The headboard bracket will have 2 tabs to accomodate any frame type. Align the appropriate tab on the bracket with the hole on the base. Use a short bolt and nut to secure the bracket. Make sure the bolt is tight. Attach the plastic spacer and T-Bracket. a.) Measure the distance between the mounting holes on the headboard and install the spacer and attachment plate to accommodate the headboard. b.) To install the plastic spacer and attachment plate, you will need (2) long bolts and (2) nuts. Place the spacer and attachment plate in the desired location and slip the bolts through the holes with the head of the bolt facing outward. Position the bolts diagonally on the spacer. Use the 9/16” (14 mm) socket and wrench to tighten the bolts.

For Series 40+ only. See page 17 390/330 Headboard Bracket installation. Headboard Brackets are an optional accessory and may not be included. A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation. STEP 1 STEP 2 Full/Twin

Queen/Twin Long/Full Long Cal King Split You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to secure it to the brackets. The heads of the bolts will face outward. Use a 9/16" (14mm) socket and 1/2" (13mm) wrench to tighten the bolts.

HEADBOARD BRACKET COMPONENTS Headboard Bracket (2) T-Bracket (2) Spacer (2) Long Bolt (8) Short Bolt (10) Nut (18) STEP 3 390/330 power down box For Series 390/330 only. See page 21 for 40+ Battery Backup instructions. Store the power down box in a convenient location for emergency use. (2) 9 Volt batteries are required to operate the power down feature and are NOT included. It is recommended to insert batteries into the power down box only when its use is required, and that batteries be removed when the power down box is no longer in use. Leaving batteries in the power down box when not in use may cause damage. FOR EMERGENCY USE ONLY. In the event that the base is stuck in an articulated position during a power outage- the Power Down Box will return the base to a flat position. The Power Down Box can only be used to bring the base to a flat position. It will not bring the base to a flat position when the base is connected to a working power source. STEP 1 Locate the Power Down Box under the base.STEP 2 Press and hold the button until the base is flat. Note: The button can be pressed at any time during the loss of power to bring the base flat. 19 20 40+ emergency battery backup pack For Series 40+ only. See page 19 for 390/330 Power Down Box instructions. Store the battery pack in a convenient location for emergency use. (4) 9 Volt batteries are required to operate the power down feature and are NOT included. It is recommended to insert batteries into the power down box only when its use is required, and that batteries be removed when the power down box is no longer in use. Leaving batteries in the power down box when not in use may cause damage. FOR EMERGENCY USE ONLY. In the event that the base is stuck in an articulated position during a power outage- the Battery Backup Pack will return the base to a flat position. Batteries are not to be used for normal operation of the base. Remove the battery pack after the emergency is over, as the system will continue to draw power from the batteries, even if not in use. Install the 9 volt batteries into the provided battery pack. Do not mix brand name batteries. Connect battery pack to input power cord attached to control box. Battery Backup Box If the base is in the upright position use the remote to return to a flat position. STEP 1 STEP 2 Input Power Cord Control Box pair wireless remote Not available on the 40+. The original remote that comes in the box is already paired to the bed base. No further action is required. In the event that the remote is not paired with the base, follow the steps below. STEP 1 Remove back cover from remote control. Remove and replace batteries. STEP 2 If the Power Down Box is not available : Remove back cover of the remote, locate the rubber button in the center of the back. On the control box located underneath the bed, double click the RESET button, light will illuminate. Press and hold the back rubber button on the remote. The button will begin to flash then become a continuous solid light for 1 to 2 seconds and then turn off. Once the remote is paired, replace back cover of the remote and test base functionality. Press and hold button on the back of the remote. The light will begin to flash then become a continuous solid light. Double click the button on the Both lights on the Power Down Box Power Down Box (this will not and the Remote will be continuous, cause the base to move). The then simultaneously turn off. light will illuminate. Replace back cover of the remote. The remote is now paired with the base. STEP 3 STEP 4 21 22 setting up two bases Connecting straps are secured to the base frame upon delivery. If a split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases together. Use both straps to secure the head and foot portions together. STEP 1 With the bases in their desired location, slightly loosen both legs to allow the strap to fit on the leg bolt, between the leg washer and frame. STEP 2 Slide side (a) of the connecting strap onto leg bolt. Swing the strap and connect side (b) to the leg bolt. Secure the strap by shifting to the left. STEP 3 Re-tighten legs. Do not over tighten. Use the remaining strap and repeat on other end of the base. a b syncing two bases - wireless remotes For Series 390/330 only. See page 24 for syncing two bases for the 40+ series. If simultaneous operation of two bases is desired, use the SmartSyncTM Cord to connect the electronics of both bases together. STEP 1 Unplug base from power source. Connect each power-down box male connection to the sync cord female connection (Refer to the illustration below). STEP 2 Disconnect the power-down box cable from each Plug base back into the power source. control box or splitter cable (390). Make note where the cable was plugged in. STEP 3 Connect the male end of each sync cord to control box Check to ensure all cords are securely attached. Both or splitter cable (390). Insert it into the same port that remotes will now operate both bases simultaneously (If you disconnected the power-down box from in Step 2. the remotes become unpaired, see page 21). Control Box Control Box Power down box Power down box MULTIFUNCTION6 RESET PAIRING LED 7 MULTIFUNCTION6 RESET PAIRING LED 7 Sync Cord Splitter Splitter STEP 4 STEP 5 STEP 6 23 24 For Series 40+ only. See page 23 for syncing two bases for the 390/330 series. A Y-Cord is included with the base. Not available on Queen, Full or Full-Long size bases. The Y-Cord connects the two control boxes to a single remote for the synchronization of two bases.

STEP 1 STEP 3

Unplug bases from power source. Plug remote into Y-Cord STEP 2 Locate the control box underneath the base. P lug end of y-cord into wired remote port on the control box. Repeat for other end of cord and second control box. Once the remote has been connected to the control box with the y-cord, plug bases into power outlet and test all functions. 40+ syncing two bases STEP 3

Control Box Bed A Remote Y-Cord Control Box Bed B

troubleshooting If one or more functions on the bed base have stopped operating: • Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. • Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly connected. • Unplug the base for 1 hour to reset the electronic components. • Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is recommended). If issue is not resolved by following the instructions above, locate serial number on warranty card or back of remote and call Ergomotion Customer Service: US 1-888-550-3746 25 ©2016 Ergomotion Inc 35000677 US/Canada Customer Service Phone 1-888-550-3746 Fax 805-979-9399 Email info@ergomotion.com Web http://www.ergomotion.com *For International customers, please contact your retailer for customer service and warranty information. V002_R8_11/2016


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply