ERGO 40DF5502 (01) PDF MANUAL

ERGO 40DF5502 (01) PDF SUMMARY:

How do you install the batteries in the remote control?

1. Open the battery cover.
2. Insert two size-AAA batteries. (Place the batteries with their terminals corresponding to the(+) and(-) indications in the battery compartment.)
3. Replace the cover.

How do you connect your TV?

1. Connecting your TV on the power outlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light.

CAUTION: Always disconnect the TV from the power outlet when the TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.

3. Press the key T / J;./ ◄ I ►and following the picture as bellow to operate the subject.

NOTE: The picture is for reference only.

How do you set up the setup wizard?

Connect an RF cable from the Tv’s input called “RF-In” and to your TV Aerial socket Press OK button to select the Start the setup.

Read these instructions:

• All the safety and operating instructions should be read before this product is operated.

Keep these instructions:

• The safety and operating instructions should be retained for future reference.

Heed all warnings:

• All warnings on the appliance and in the operating instructions should be adhered to.

Follow all instructions:

• All operating and use instructions should be followed.

Do not use this apparatus near water:

• The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding plug.

• A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug the apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain readily operable.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

1 D I This equipment is a Class II or double insulated electrical appliance. It does not

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.

Electrical safety

The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on them, which may damage the leads. Hold the main plug, not the wires, when removing from a socket. During a thunderstorm or when not using the television for long periods, turn off the power switch on the back of the television. Do not allow water or moisture to enter the TV or power adapter. Do not use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally. Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for a long period. Do not break open or throw exhausted batteries in a fire.

Physical safety

Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5 cm (2") clearance all around. Do not tap or shake the TV screen, this may damage the internal circuits. Take good care of the remote control. To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs. Unplug the apparatus during lightning storms or when unused for long periods. Refer all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.

What is the function of the POWER button?

Turn on TV/Standby

What is the function of the SOURCE button?

Audio/Video input source selection.

What is the function of the MENU button?

Open settings menu.

What is the function of the VOL- button?

Decrease volume.

What is the function of the VOL+ button?

Increase volume.

What is the function of the CH- button?

Previous channel.

What is the function of the CH+ button?

Next channel.

What is the function of the IR RECEIVER?

Receives infrared signals from the remote control.

What is the function of the INDICATOR LED?

Status indicator.

What is the function of the POWER ON/OFF button?

Turn on the TV/Standby.

What is the function of the SOURCE button?

Press to change signal source.

What is the function of the ASPECT button?

Change aspect ratio.

What is the function of the TV button?

Open TV mode.

What is the function of the SLEEP button?

Sleep mode.

What is the function of the NUMBER KEYS?

Change the channel directly.

What is the function of the MOUSE button?

Smart TV mouse mode.

What is the function of the SETTINGS button?

Open settings.

What is the function of the MUTE button?

Mute or restore the sound.

What is the function of the VOL button?

Increase and decrease volume.

What is the function of the CH button?

Next and Previous channel.

What is the function of the MEGOGO button?

Direct access button for “MEGOGO” application. Works only on models with MEGOGO pre-installed by developer.

What is the function of the INFO button?

Show information about the current program.

What is the function of the HOME button?

Press to open the Home Page.

What is the function of the NAVIGATION KEYS (Up, Down, Left, Right and OK)?

To move in the menus and confirm settings.

What is the function of the MENU button?

Display menu page.

What is the function of the BACK button?

Press to exit or return one step back.

What is the function of the REC button?

Press to open PVR Settings Menu; in DTV mode, press REC button to start recording, press ■ button to stop recording.

What is the function of the ►II button?

Play/Pause.

What is the function of the EPG button?

Show the Electronic Program Guide.

What is the function of the ■ button?

Stop playback.

What is the function of the i… button?

Previous file or chapter.

What is the function of the .- button?

Fast rewind playback.

What is the function of the .i button?

Next file or chapter.

What is the function of the ~ button?

Fast forward playback.

What is the function of the Buttons for applications?

Buttons for applications.

How do I select the language?

Press the T …&. button to select the language. Press the OK button to confirm, and press the ► button to set up the country.

How do I select the time zone?

Press the T /…&. button to select the time zone.

How do I connect to the WiFi/Network?

Press the ► button to connect the WIFl/network. Press the OK button to connect the WIFl/network.

How do I select the input source?

Press the ► button to select the input source.

Press the T / .&.button to select the input source.

Press the INPUT button to enter the Input Source menu. Press the T / .A. button to select the input source. Press OK to select the source.

What are the available input sources?

• AV
• YPBPR
• SCART
• VGA
• HDMI1
• HDMI2

How do I enter the main menu?

Press the MENU button to enter the main menu.

How do I install an app?

Press the T / • / ◄ / ► button to select the app you want to install.

How do I access settings?

Press the T / • / ◄ / ► button to select Settings. Press the OK button to enter Settings.

How do I navigate and select settings options?

Press the ◄ / ► button to Select, Press the OK button to enter.

How do I access Network settings?

Press the T / .&. / ◄ / ► button to Select, Press the OK button to enter.

How do I access Time settings?

Press the T / .&. button to Select, Press the OK button to enter.

What are the Time setting options?

• Time Zone
• Auto
• Attach
• Daylight Saving
• 24 Hours

How do I access Common settings?

Press the T / .&. button to Select, Press the OK button to enter.

How do I access Product Information?

Press the T / • button to select Product Information. Press the OK button to enter.

What information is included in the Product Information section?

• Internal storage of information
• Android Version
• Production Model
• Firmware version
• Number of processor cores

How do I access Picture settings?

Press the ◄ / ► button to select Picture. Press OK to enter the setting.

What is the Production Model?

SMART_TV

What is the Firmware version?

20180527_020140

How many processor cores are there?

4Core

What are the available options in the Network Information section?

• Wire Net Mac Address
• Wireless Net Mac Address

How do I adjust Picture settings?

Press T / .&.to select: Picture Mode/Contrast/ Brightness/Color/Sharpness/Hue/ Backlight/Noise Reduction/ Aspect Ratio/Color Temp/More Settings. Press◄ / ►to adjust or select.

What are the available options for adjusting the Picture?

• Picture Mode
• Contrast
• Brightness
• Color
• Sharpness
• Hue
• Backlight
• Noise Reduction
• Aspect Ratio
• Color Temp
• More Settings

How do I select the Picture Mode?

Press the T! • button to select Picture Mode, then press the ◄/► button to select.

What are the Picture Mode options?

• Standard
• Movie
• Vivid
• Energy Saving
• User

What is Standard Picture Mode?

The default mode, to make users experience high-quality images under normal light.

What is Movie Picture Mode?

This mode is more suitable for watching movies.

What is Vivid Picture Mode?

Image colors more beautiful, more vivid picture.

What is Energy Saving Picture Mode?

Reduce screen brightness, improved contrast for energy saving.

What is User Picture Mode?

User-defined picture settings.

How do I adjust Contrast/ Brightness/Color/Sharpness/Hue/Backlight?

Press the T / • button to select, and press the ◄ / ► button to adjust.

What does Contrast do?

Adjust image contrast.

What does Brightness do?

Adjust image brightness.

What does Color do?

Adjust image color density.

What does Sharpness do?

Adjust the image edge sharpness.

What does Hue do?

Adjust the Hue brightness.

What does Backlight do?

Adjust the screen backlight brightness.

What picture settings can be adjusted in User mode?

Contrast/ Brightness/ Color/ Sharpness

How do I adjust Noise Reduction?

Press T /•to select Noise Reduction, and press ◄/►to select.

What are the available options for Noise Reduction?

• Off
• Low
• Middle
• High
• Auto

How do I adjust Aspect Ratio?

Press T /•to select Aspect Ratio, and press ◄/►to select.

What are the available options for Aspect Ratio?

• Auto
• 16:9
• 4:3
• Zoom1
• Zoom2

How do I adjust Color Temp?

Press the T / • button to select Color Temperature. press ◄ / ► to select.

What are the available options for Color Temp?

• Cool
• Normal
• Warm

What does the Cool Color Temp setting do?

Produces a gentle blue-hued image.

What does the Normal Color Temp setting do?

Produces a vivid image.

What does the Warm Color Temp setting do?

Produces a red-hued image.

How do I access More Settings?

Press the T / .A. button to select More Setting.

How do I adjust DLC?

Press T /.A.to select DLC, press◄/ ►to select Dark/Normal/Bright/Off.

How do I access Sound settings?

Press the MENU button to display the main menu. Press the ◄ / ► button to select Sound in the main menu.

How do I adjust Sound settings?

Press T / .&.to select:Sound Mode/Bass/Treble/Balance/AVC/Audio Description/ Hearing Impaired/More settings. Press OK/ ◄ / ► to select or adjust.

How do I select Sound Mode?

Press the T / .A. button to select Sound Mode, then press the ◄ / ► button to select.

What are the Sound Mode options?

• Standard
• Music
• Theater
• News
• User

What does the Standard Sound Mode do?

Produces a balanced sound in all environments.

What does the Music Sound Mode do?

Preserves the original sound. Good for musical programs.

What does the Theater Sound Mode do?

Enhances treble and bass for a rich sound experience.

What does the News Sound Mode do?

Enhanced voice.

What does the User Sound Mode do?

Select to customize picture settings.

How do I adjust the Bass?

Adjust the bass.

How do I adjust the Treble?

Adjust the treble.

How do I adjust the Balance?

Adjust the left and right channel output balance. Press the T / • button to select Balance, then press the ◄ / ► button to adjust.

How do I adjust AVC?

Press the T / • button to select AVC, then press the ◄ / ► button to choose ON/OFF. After opening the AVC, Once the volume is set, regardless of any difference TV Version printed on each channel, it can make the speaker volume remain stable.

How do I adjust Audio Description?

Press the ◄ / ► button to set ON/OFF. If setting ON, press ◄ / ► to adjust the AD Volume.

How do I adjust Hearing Impaired?

Press the ◄ / ► button to set ON/OFF.

What are the options available in More Settings for Sound?

• SPDIF
• SPDIF Delay
• Surround
• Audio Only

How do I adjust SPDIF?

Press the T / • button to select SPDIF, then press the ◄/► button to choose Off/ RAW/PCM.

How do I adjust SPDIF Delay?

Press the T / • button to select SPDIF Delay, then press the ◄ / ► button to adjust.

How do I adjust Surround?

Achieve a better surround sound effect. Press the T / • button to select Surround, then press the ◄ / ► button to choose ON/OFF.

How do I adjust Audio Only?

After the opening, the screen is not displayed only plays sound. Press the T / .A. button to select Audio Only, then press the ◄ / ► button to choose ON/OFF.

What is the Audio Only Notice?

Are you sure to open Audio Only Mode? CANCEL OK

How do I access Channel settings?

Press the MENU button to display the main menu. Press the ◄/► button to select Channel in the main menu.

How do I select Channel options?

Press the T/ .A. button to select. Press OK◄ / ► to enter.

How do I set the Antenna Type?

Select the Air/Cable/Satellite to tune.

What are the available Channel options?

• Antenna Type-Air
• Auto Scan
• Analog Manual Scan
• Digital Manual Scan
• Channel List

How do I perform an Auto Scan?

Press the T /.A. button to select Auto Scan. Press OK to start Auto Scan.

What Search Type options are available for Auto Scan?

• Analog + Digital

How do I perform an Analog Manual Scan?

Press the T / .6. button to select Analog Manual Scan. Press OK to start Scan.

What options are available for Analog Manual Scan?

• Color System
• Sound System
• Frequency{MHz)

How do I perform a Digital Manual Scan?

Press the T / .6. button to select Digital Manual Scan, press OK to start Scan.

How do I access the Channel List?

Press the T / .6. button to select Channel List to list. Press the MENU button to edit the channel (Move/Skip /Delete /Fav).

What options are available for editing the Channel List?

• Move
• Skip
• Delete
• Fav

How do you select the EPG?

Press the T/▲▼ button to select EPG.

How do you select Auto Scan?

Press the T/▲▼ button to select Auto Scan, press OK to start Auto Scan.

How do you select Analog Manual Scan?

Press the T/▲▼ button to select Analog Manual Scan, press OK to start Scan.

How do you select Digital Manual Scan?

Press the T/▲▼ button to select Digital Manual Scan, press OK to start Scan.

How do you select Scan?

Press T/▲▼ button to select Scan.

How do you select Auto Scan to search for the program automatically?

Press the T/▲▼ button to select Auto Scan to search the program automatically.

How do you select Manual Scan to search for the program you set?

Press the T/▲▼ button to select Manual Scan to search for the program you set.

How do you display the main menu?

Press the MENU button to display the main menu.

How do you select System Lock?

Press the ◄/► button to select System Lock.

How do you select Change Password/System Lock?

Press the T/▲▼ button to select Change Password/System Lock. Press OK/◄/► to enter.

How do you select Change Password?

Press T/▲▼ button to select Change Password.

How do you select System Lock?

Press T/▲▼ button to select System Lock.

How do you lock the keypad?

Press the T/▲▼ button to lock the keypad.

How do you select Time Setting in the main menu?

Press the MENU button to display the main menu. Press ◄/► button to select Time Setting in the main menu.

How do you select OSD Timer/Sleep Timer/Autostandby Timer?

Press T/▲▼ button to select: OSD Timer/Sleep Timer/Autostandby Timer. Press OK/◄/► to enter.

How do you select OSD Timer?

Press the T/▲▼ button to select OSD Timer, press ◄/► to select (Optional: off, 5sec, 15sec, 30sec).

How do you select Sleep Timer?

Press the T/▲▼ button to select Sleep Timer, press ◄/► to select (Optional: off, 15min, 30min, 45min, 60min, 90min, 120min, 240min).

How do you select Autostandby Timer?

Press the T/▲▼ button to select Autostandby Timer (Optional: off, 3hour, 4hour, 5hour).

How do you select Common in the main menu?

Press the MENU button to display the main menu. Press ◄/► button to select Common in the main menu.

How do you select PVR Setting/Blue Screen/Teletext/ Audio Language 1st /Audio Language 2nd/Subtitle Language 1st/Subtitle Language 2nd/HDMI CEC/ Menu Reset?

Press T/▲▼ button to select: PVR Setting/Blue Screen/Teletext/ Audio Language 1st /Audio Language 2nd/Subtitle Language 1st/Subtitle Language 2nd/HDMI CEC/ Menu Reset. Press OK/◄/► to enter.

How do you select PVR Setting?

Press the T/▲▼ button to select PVR Setting. Press ◄/► to select Disk/Record List.

How do you select Blue Screen?

Press the T/▲▼ button to select Blue Screen. Press ◄/► to select ON/OFF.

How do you select Teletext?

Press the T/▲▼ button to select Teletext. Press ◄/► to select Arabic/East/West/Farsi/Russian.

How do you select HDMI CEC?

Press the T/▲▼ button to select HDMI CEC. Press ◄/► to select ON/OFF.

How do you select Menu Reset?

Press the T/▲▼ button to select Menu Reset. Press ◄/► to select Cancel/ok to reset the previous setting.

How do you enter input source?

Press INPUT to enter input source.

How do you select Media?

Press the T/▲▼ button to select Media.

How do you select video?

Press ◄/► to select video.

How do you select music?

Press ◄/► to select music.

How do you select Photo?

Press ◄/► to select Photo.

How do you select Folder?

Press ◄/► to select Folder.

What should you do if the TV has no signal input?

• Possible Cause: Signal cable is loose or not connected, loose or disconnected.
• Remedy: Ensure the signal cable is not loose or disconnected. Reattach and try again.

What should you do if the remote control distance is short or there is no control?

• Possible Cause: Receiver of remote control is covered.

• Remedy: Ensure the remote receiver is not obstructed.

• Possible Cause: The battery energy of the remote control is too low.

• Remedy: Change the batteries.

• Possible Cause: Adjustment is incorrect.

• Remedy: Use auto-adjustment function.

What should you do if the display is faint?

• Possible Cause: Display mode is incorrect.

• Remedy: Use the recommended mode.

• Possible Cause: Adjustment is incorrect.

• Remedy: Use auto-adjustment function.

What should you do if the display image does not fill the screen?

• Possible Cause: Adjustment is incorrect.

• Remedy: Enter PICTURE to adjust the horizontal and vertical position.

• Possible Cause: Display mode is incorrect.

• Remedy: Use the recommended mode.

What should you do if you are unable to operate the TV?

• Possible Cause: Exterior influence, for example lighting, static electricity and so on, which might disturb the normal operation of the TV.
• Remedy: Press the <!> button to turn off the electrical source, then press the <!> button to turn on the TV again after 1-2 minutes.

What should you do if there is static and sound noise?

• Possible Cause: Antenna cable connector is loose, cable is damaged.

• Remedy: Check the antenna cable connector plug for secure connection and any damage.

• Possible Cause: Antenna cable type is not correct.

• Remedy: Check antenna cable type (VHF/UHF).

• Possible Cause: Direction or position of antenna is incorrect.

• Remedy: Adjust the direction or position of the antenna.

• Possible Cause: Signal is weak.

• Remedy: Attempt to use a signal amplifier.

What should you do if the TV image is better, but has noise?

• Possible Cause: Antenna cable connector is loose, cable is damaged.
• Remedy: Check the antenna cable connector plug for secure connection and any damage.

What should you do if there is no image and no sound?

• Possible Cause: Power plug is loose, power cord does not connect well.

• Remedy: Check to ensure the power cord is connected.

• Possible Cause: The TV is off.

• Remedy: Press POWER on the panel or remote control.

• Possible Cause: The TV is not turned on.

• Remedy: Check if the <!> button is on.

What should you do if the TV image has stripes?

• Possible Cause: Signal is exposed to interference, such as a car, neon light, electric blower, etc.
• Remedy: Do not use an electric blower around the unit. Adjust the antenna cable direction to reduce interference.

What should you do if the TV image has shadows?

• Possible Cause: TV signal is reflected by a valley or building.

• Remedy: Use a high-directional antenna.

• Possible Cause: Direction of antenna is incorrect.

• Remedy: Adjust the direction of the antenna.

What should you do if the TV has no sound?

• Possible Cause: Volume setting is too low.

• Remedy: Adjust the volume to a proper level.

• Possible Cause: Sound is muted.

• Remedy: Press MUTE to deactivate mute.

What precautions should be taken regarding the TV screen?

Do not allow your TV screen to display the same image for an extended period of time. Please set up a screen protection procedure. If a high-contrast picture remains on the TV screen for a long time, this picture could burn the image onto the screen. Usually, the burnt image will disappear gradually when you turn off the TV’s power. However, this damage cannot be repaired.

What is the maximum resolution of the TV system?

1920×1080

What is the brightness of the TV?

200-220 cd/m²

What is the static contrast of the TV?

5000:1

What is the response time of the TV?

8ms

What is the consumption of the TV?

75W

What is the power supply of the TV?

100-240V~, 50/60Hz

What are the connectivity options of the TV?

• Composite Video Input
• Component Video Input (YPbPr)
• PC Video Input (VGA)
• PC Audio Input
• HDMI Input
• Scart Input
• CI Input
• RF Antenna Input
• RJ 45 Output
• Headphone Output
• Coaxial Cable

What is the data interface of the TV?

USB

What are the supported system files of the TV?

FAT32 and FAT16

What are the supported video file extensions for multimedia playback?

.avi/.mp4/.mkv/.mov/.mpg/.dat/.vob/.rmvb

What are the supported music file extensions for multimedia playback?

.mp3/.m4a/.aac/.ac3

What are the supported photo file extensions for multimedia playback?

.jpg/.bmp/.png

What are the supported text file extensions?

.txt

What is the signal type of the remote control?

Infrared

What is the control distance of the remote control?

8 meters

What is the control angle of the remote control?

30° (Horizontal)

What is the power supply of the remote control?

AAA 1.5V x 2