EPSON PRO EX7260 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD EPSON PRO EX7260 (01) PDF MANUAL


PDF Content Summary: EX3260/EX5260/Pro EX7260/Pro EX9210/ Pro EX9220/VS250/VS350/VS355 User's Guide Contents EX3260/EX5260/Pro EX7260/Pro EX9210/Pro EX9220/VS250/VS350/VS355 User's Guide ................... 9 Introduction to Your Projector ................................................................................................................. 10 Projector Features.............................................................................................................................. 10 Product Box Contents.................................................................................................................... 11 Additional Components ................................................................................................................ 13 Additional Projector Software and Manuals................................................................................... 14 Optional Equipment and Replacement Parts................................................................................. 15 Warranty and Registration Information.......................................................................................... 15 Notations Used in the Documentation ................................................................................................ 16 Where to Go for Additional Information .............................................................................................. 16 Projector Part Locations..................................................................................................................... 16 Projector Parts - Front/Top ............................................................................................................ 17 Projector Parts - Rear.................................................................................................................... 18 Projector Parts - Base.................................................................................................................... 19 Projector Parts - Control Panel ...................................................................................................... 20 Projector Parts - Remote Control................................................................................................... 23 Setting Up the Projector ........................................................................................................................... 26 Projector Placement........................................................................................................................... 26 Projector Setup and Installation Options ....................................................................................... 26 Projection Distance........................................................................................................................ 28 Projector Connections........................................................................................................................ 31 Connecting to Computer Sources.................................................................................................. 31 Connecting to a Computer for USB Video and Audio................................................................ 31 Connecting to a Computer for VGA Video................................................................................. 33 Connecting to a Computer for HDMI Video and Audio.............................................................. 34 Connecting to a Computer for USB Mouse Control................................................................... 35 Connecting to a Computer for Sound........................................................................................ 36 Connecting to Video Sources ........................................................................................................ 37 Connecting to an HDMI Video Source ...................................................................................... 38 Connecting to an MHL-Compatible Device ............................................................................... 39 3 Connecting to a Component Video Source ............................................................................... 40 Connecting to a Composite Video Source ................................................................................ 41 Connecting to a Video Source for Sound .................................................................................. 42 Connecting to External USB Devices ............................................................................................ 43 USB Device Projection.............................................................................................................. 44 Connecting a USB Device or Camera to the Projector.............................................................. 44 Selecting the Connected USB Source ...................................................................................... 45 Disconnecting a USB Device or Camera From the Projector .................................................... 46 Installing Batteries in the Remote Control .......................................................................................... 46 Opening the Lens Cover .................................................................................................................... 48 Using the Projector on a Network ............................................................................................................ 49 Wireless Network Projection .............................................................................................................. 49 Installing the Wireless LAN Module ............................................................................................... 50 Using a QR Code to Connect a Mobile Device .............................................................................. 52 Using Quick Wireless Connection (Windows)................................................................................ 53 Selecting Wireless Network Settings Manually.............................................................................. 55 Wireless LAN Menu Settings .................................................................................................... 58 Selecting Wireless Network Settings in Windows.......................................................................... 60 Selecting Wireless Network Settings on Mac ................................................................................ 60 Setting Up Wireless Network Security ........................................................................................... 60 Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) ..... 61 Screen Mirroring Restrictions.................................................................................................... 62 Selecting Screen Mirroring Settings.......................................................................................... 62 Connecting for Screen Mirroring with Miracast ......................................................................... 63 Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer........................... 64 Setting Up Projector Network E-Mail Alerts........................................................................................ 64 Network Projector E-mail Alert Messages ..................................................................................... 66 Setting Up Monitoring Using SNMP ................................................................................................... 66 Controlling a Networked Projector Using a Web Browser .................................................................. 67 Using Basic Projector Features ............................................................................................................... 71 Turning On the Projector .................................................................................................................... 71 Using the Home Screen................................................................................................................. 73 Turning Off the Projector .................................................................................................................... 74 4 Selecting the Language for the Projector Menus................................................................................ 76 Adjusting the Image Height ................................................................................................................ 77 Image Shape...................................................................................................................................... 78 Correcting Image Shape with the Horizontal Keystone Slider ....................................................... 78 Correcting Image Shape with the Keystone Buttons...................................................................... 79 Correcting Image Shape with Quick Corner .................................................................................. 82 Resizing the Image............................................................................................................................. 84 Focusing the Image Using the Focus Ring......................................................................................... 85 Remote Control Operation ................................................................................................................. 86 Using the Remote Control as a Wireless Mouse ........................................................................... 87 Using the Remote Control as a Pointer.......................................................................................... 88 Selecting an Image Source ................................................................................................................ 89 Projection Modes ............................................................................................................................... 91 Changing the Projection Mode Using the Remote Control ............................................................ 92 Changing the Projection Mode Using the Menus........................................................................... 92 Image Aspect Ratio............................................................................................................................ 93 Changing the Image Aspect Ratio ................................................................................................. 93 Available Image Aspect Ratios...................................................................................................... 94 Color Mode......................................................................................................................................... 95 Changing the Color Mode.............................................................................................................. 96 Available Color Modes................................................................................................................... 96 Turning On Auto Iris....................................................................................................................... 97 Controlling the Volume with the Volume Buttons................................................................................ 98 Projecting a PC Free Presentation ..................................................................................................... 98 Supported PC Free File Types ...................................................................................................... 98 Starting a PC Free Slide Show ...................................................................................................... 99 Starting a PC Free Movie Presentation ....................................................................................... 101 PC Free Display Options ............................................................................................................. 102 Adjusting Projector Features ................................................................................................................. 104 Shutting Off the Picture and Sound Temporarily .............................................................................. 104 Stopping Video Action Temporarily .................................................................................................. 105 Zooming Into and Out of Images ...................................................................................................... 106 Projector Security Features.............................................................................................................. 107 5 Password Security Types ............................................................................................................ 107 Setting a Password ................................................................................................................. 107 Selecting Password Security Types........................................................................................ 109 Entering a Password to Use the Projector............................................................................... 110 Saving a User's Logo Image to Display................................................................................... 111 Locking the Projector's Buttons ................................................................................................... 113 Unlocking the Projector's Buttons ........................................................................................... 114 Installing a Security Cable ........................................................................................................... 114 Projector Identification System for Multiple Projector Control........................................................... 115 Setting the Projector ID................................................................................................................ 115 Setting the Remote Control ID..................................................................................................... 116 Matching Multiple-Projector Display Quality ................................................................................ 117 Projecting Two Images Simultaneously............................................................................................ 118 Copying Menu Settings Between Projectors .................................................................................... 120 Saving Settings to a USB Flash Drive.......................................................................................... 120 Transferring Settings from a USB Flash Drive ............................................................................. 122 Saving Settings to a Computer .................................................................................................... 124 Transferring Settings from a Computer ....................................................................................... 126 Adjusting the Menu Settings .................................................................................................................. 130 Using the Projector's Menus............................................................................................................. 130 Image Quality Settings - Image Menu .............................................................................................. 132 Input Signal Settings - Signal Menu.................................................................................................. 135 Projector Feature Settings - Settings Menu...................................................................................... 137 Projector Setup Settings - Extended Menu....................................................................................... 140 Projector Network Settings - Network Menu..................................................................................... 143 Projector Setup Settings - ECO Menu .............................................................................................. 145 Projector Information Display - Info Menu ........................................................................................ 147 Event ID Code List....................................................................................................................... 148 Projector Reset Options - Reset Menu............................................................................................. 150 Maintaining and Transporting the Projector ......................................................................................... 152 Projector Maintenance ..................................................................................................................... 152 Cleaning the Lens........................................................................................................................ 152 Cleaning the Projector Case........................................................................................................ 153 6 Air Filter and Vent Maintenance .................................................................................................. 153 Cleaning the Air Filter and Vents............................................................................................. 154 Replacing the Air Filter............................................................................................................ 154 Projector Lamp Maintenance....................................................................................................... 157 Replacing the Lamp ................................................................................................................ 158 Resetting the Lamp Timer....................................................................................................... 162 Replacing the Remote Control Batteries ..................................................................................... 163 Transporting the Projector................................................................................................................ 165 Solving Problems .................................................................................................................................... 166 Projection Problem Tips ................................................................................................................... 166 Projector Light Status....................................................................................................................... 167 Using the Projector Help Displays .................................................................................................... 170 Solving Image or Sound Problems ................................................................................................... 171 Solutions When No Image Appears............................................................................................. 171 Solutions When Image is Incorrect Using the USB Display Function .......................................... 172 Solutions When "No Signal" Message Appears........................................................................... 173 Displaying From a PC Laptop ................................................................................................. 174 Displaying From a Mac Laptop ............................................................................................... 174 Solutions When "Not Supported" Message Appears ................................................................... 174 Solutions When Only a Partial Image Appears............................................................................ 175 Solutions When the Image is Not Rectangular ............................................................................ 175 Solutions When the Image Contains Noise or Static ................................................................... 176 Solutions When the Image is Fuzzy or Blurry .............................................................................. 177 Solutions When the Image Brightness or Colors are Incorrect .................................................... 178 Solutions to Sound Problems ...................................................................................................... 178 Solving Projector or Remote Control Operation Problems ............................................................... 179 Solutions to Projector Power or Shut-Off Problems..................................................................... 179 Solutions to Problems with the Remote Control........................................................................... 180 Solutions to Password Problems................................................................................................. 181 Solving Network Problems ............................................................................................................... 181 Solutions When Wireless Authentication Fails ............................................................................ 182 Solutions When You Cannot Access the Projector Through the Web ......................................... 182 Solutions When You Cannot Connect Using Screen Mirroring.................................................... 183 7 Solutions When the Image Contains Static During Network Projection ....................................... 183 Solutions When Network Alert E-Mails are Not Received............................................................ 184 Where to Get Help............................................................................................................................ 184 Technical Specifications ........................................................................................................................ 186 General Projector Specifications...................................................................................................... 186 Projector Lamp Specifications.......................................................................................................... 189 Remote Control Specifications......................................................................................................... 190 Projector Dimension Specifications.................................................................................................. 190 Projector Electrical Specifications .................................................................................................... 191 Projector Environmental Specifications............................................................................................ 193 Projector Safety and Approvals Specifications................................................................................. 194 Supported Video Display Formats.................................................................................................... 194 USB Display System Requirements................................................................................................. 198 Notices ..................................................................................................................................................... 200 Recycling.......................................................................................................................................... 200 Important Safety Information............................................................................................................ 200 Important Safety Instructions............................................................................................................ 201 Restriction of Use ........................................................................................................................ 204 List of Safety Symbols (corresponding to IEC60950-1 A2)............................................................... 204 FCC Compliance Statement............................................................................................................. 208 Binding Arbitration and Class Waiver ............................................................................................... 208 Trademarks...................................................................................................................................... 212 Copyright Notice............................................................................................................................... 212 A Note Concerning Responsible Use of Copyrighted Materials................................................... 213 Copyright Attribution.................................................................................................................... 213 8 EX3260/EX5260/Pro EX7260/Pro EX9210/Pro EX9220/VS250/VS350/VS355 User's Guide Welcome to the EX3260/EX5260/Pro EX7260/Pro EX9210/Pro EX9220/VS250/VS350/VS355 User's Guide. For a printable PDF copy of this guide, click here. 9 Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information Projector Part Locations Projector Features Your projector includes these special features: Bright, high-resolution projection system • VS250: Up to 3200 lumens of color brightness (color light output) and 3200 lumens of white brightness (white light output) • EX3260/VS350/VS355: Up to 3300 lumens of color brightness (color light output) and 3300 lumens of white brightness (white light output) • Pro EX9210: Up to 3400 lumens of color brightness (color light output) and 3400 lumens of white brightness (white light output) • EX5260/Pro EX7260/Pro EX9220: Up to 3600 lumens of color brightness (color light output) and 3600 lumens of white brightness (white light output) Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output measured in accordance with ISO 21118. • EX3260/VS250: Native resolution of 800 × 600 pixels (SVGA) • EX5260/VS350: Native resolution of 1024 × 768 pixels (XGA) • Pro EX7260/VS355: Native resolution of 1280 × 800 pixels (WXGA) • Pro EX9210/Pro EX9220: Native resolution of 1920 × 1200 pixels (WUXGA) Flexible connectivity • Plug-and-play 3-in-1 USB projection, audio, and mouse control for instant setup • Wireless network support for projection, monitoring, and control via remote (EX3260/VS250/VS350/VS355 require the optional wireless LAN module) 10 • Projection from iOS or Android devices and free Epson iProjection app; visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for more information (EX3260/VS250/VS350/VS355 require the optional wireless LAN module) • PC Free photo slide shows via connected USB memory devices • Two HDMI ports for multiple high-definition AV devices, including MHL support (Pro EX9210/Pro EX9220) • HDMI port for computer or video device connection (EX3260/EX5260/VS250/VS350/VS355) • HDMI/MHL port for computer or video device connection, including MHL support (Pro EX7260) • Miracast screen mirroring for laptops and mobile devices (Pro EX9220) Easy-to-use setup and operation features • Epson's quick-connect on-screen QR code feature for easy wireless setup • Low total cost of ownership with longer lamp life • Automatic vertical keystone correction and innovative horizontal keystone correction slider for flexible projector placement • Epson's Instant Off and Direct Power On features for quick setup and shut down • Built-in closed captioning decoder (composite NTSC input signal only) Note: The EX3260 is shown in most illustrations in this manual, unless noted otherwise. Product Box Contents Additional Components Additional Projector Software and Manuals Optional Equipment and Replacement Parts Warranty and Registration Information Parent topic: Introduction to Your Projector Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping. 11 Make sure your projector boxes included all of these parts: 1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 VGA computer cable 6 USB cable (EX3260/EX5260/Pro EX7260/Pro EX9210/Pro EX9220) 7 Carrying case (EX3260/EX5260/Pro EX7260/Pro EX9210/Pro EX9220) 8 Wireless LAN module (EX5260/Pro EX9210) 9 Wireless LAN module cover (EX3260/EX5260/Pro EX9210/VS250/VS350/VS355) 10 Projector documentation CD 12 Parent topic: Projector Features Related concepts Projector Connections Additional Components Depending on how you plan to use the projector, you may need to obtain additional components. Note: To connect a Mac that does not include a compatible video output port, you need to obtain an adapter that allows you to connect to an input port on the projector. Contact Apple for compatible adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options. Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information. Signal or connection type Additional component necessary Composite video RCA-style video or A/V cable Component video D-sub, 15-pin, component-to-VGA video cable or adapter Available for purchase from Epson or an authorized Epson reseller. HDMI Compatible HDMI cable Available for purchase from Epson or an authorized Epson reseller. Note: Older Mac computers (2009 and earlier) may not support HDMI audio. MHL (Pro EX7260/Pro EX9210/Pro EX9220) MHL-compatible device or device with an integrated MHL connector, MHL cable, or HDMI cable and MHL adapter compatible with your device Available for purchase from Epson or an authorized Epson reseller. Audio from certain ports Commercially available audio cable compatible with your device Parent topic: Projector Features 13 Additional Projector Software and Manuals After connecting and setting up the projector, install the projector software from the included software CD, or download the software and manuals as necessary. You can install the projector software programs listed here and view their manuals for instructions on using them. Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Projector software Manual Description Epson Projector Management (Windows only) Epson Projector Management Operation Guide Lets you monitor and control your projector through the network. You can download the latest software and documentation from the Epson web site. Go to epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector. Epson iProjection (Windows/Mac) Epson iProjection Operation Guide (Windows/Mac) Lets you project the computer screens of users over a network. You can download the latest software and documentation from the Epson web site. Go to epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector. Epson iProjection app Instructions are included with the app Lets you project from an iOS device, Android device, or Chromebook if your projector is connected to a network that includes a wireless access point. Visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for more information. — Open Source Software License You can download this document from the Epson web site. Go to epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector. Parent topic: Projector Features 14 Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales). Epson offers the following optional accessories and replacement parts for your projector: Option or part Part number Genuine Epson replacement lamp (ELPLP96) V13H010L96 Replacement air filter (ELPAF32) V13H134A32 Wireless LAN module (ELPAP10; included with EX5260/Pro EX9210) V12H731P02 Universal projector mount (ELPMBPJG) V12H808001 Soft carrying case (ELPKS69) V12H001K69 Accolade Duet portable projector screen ELPSC80 HDMI audio video cable 3 feet (0.9 m) length AV22300-03 HDMI audio video cable 6 feet (1.8 m) length AV22300-06 1-Year Extended Exchange Service Plan EPPEXPA1 2-Year Extended Exchange Service Plan EPPEXPA2 Parent topic: Projector Features Warranty and Registration Information Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty that came with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details. Register your product online using the projector CD or at this site: epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and services. Parent topic: Projector Features 15 Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector. • Tips contain additional projection information. Parent topic: Introduction to Your Projector Where to Go for Additional Information Need quick help on using your projector? Here's where to look for help: • Built-in help system Press the Home button on the remote control or projector, select Help, and press Enter to get quick solutions to common problems. • epson.com/support (U.S.) or epson.ca/support (Canada) View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and any other sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Parent topic: Introduction to Your Projector Related references Where to Get Help Projector Part Locations Check the projector part illustrations to learn about the parts on your projector. Projector Parts - Front/Top Projector Parts - Rear Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector 16 Projector Parts - Front/Top 1 Exhaust vent 2 A/V Mute slide lever 3 Foot release lever 4 Lens cover 5 Front adjustable foot 6 Lens 7 Remote control receiver 8 Horizontal keystone slider 9 Air filter/intake vent 10 Air filter cover 11 Kensington security lock slot 12 Control panel 13 Zoom ring (EX5260/Pro EX7260/Pro EX9210/Pro EX9220/VS350/VS355) 17 14 Focus ring 15 Lamp cover Parent topic: Projector Part Locations Projector Parts - Rear EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 1 AC input 2 Wireless LAN module cover screw (EX3260/EX5260/Pro EX9210/VS250/VS350/VS355) 3 Audio ports 4 Video port 18 5 Remote receiver 6 Speaker 7 HDMI port (EX3260/EX5260/VS250/VS350/VS355); HDMI/MHL port (Pro EX7260); HDMI1 and HDMI2/MHL ports (Pro EX9210/Pro EX9220) 8 Computer port 9 USB-B port 10 USB-A port Parent topic: Projector Part Locations Projector Parts - Base 19 1 Ceiling mount holes (3) 2 Security cable attachment point 3 Rear feet 4 Front adjustable foot Parent topic: Projector Part Locations Projector Parts - Control Panel EX3260/VS250 20 EX5260/Pro EX9210/VS350/VS355 Pro EX7260/Pro EX9220 1 Source Search button (searches for connected video sources) 2 Enter button (selects options) 21 3 Vertical keystone adjustment buttons (displays the adjustment screen and adjusts screen shape) and arrow buttons 4 Esc button (cancels/exits functions) 5 Volume buttons (adjust speaker volume; EX5260/Pro EX7260/Pro EX9210/Pro EX9220VS350/VS355), horizontal keystone adjustment buttons, and arrow buttons 6 Menu button (accesses projector menu system) 7 Home button (displays Home screen) 8 Power button 9 Status lights Parent topic: Projector Part Locations Related references Projector Light Status Related tasks Using the Projector Help Displays 22 Projector Parts - Remote Control 1 Power button 23 2 Computer button (cycles through connected computer sources) 3 HDMI/Video button (cycles through connected HDMI/video sources) 4 Numeric buttons (enter numbers when you hold down the Num button) 5 Auto button (automatically adjusts position, tracking, and sync settings when projecting from a computer using a VGA cable) 6 Aspect button (selects the image aspect ratio) 7 Num button (when held down, switches numeric buttons to number function) 8 Menu button (accesses projector menu system) 9 Arrow buttons (move through on-screen options and control wireless mouse functions) 10 Enter button (selects options and controls wireless mouse functions) 11 User button (customizable for different functions) 12 Page up/down buttons (control presentation slides) 13 E-Zoom +/– buttons (zoom into and out of the image) 14 A/V Mute button (turns off picture and sound) 15 Split button (splits the screen between two image sources; Pro EX7260/Pro EX9210/Pro EX9220/VS355) 16 Home button (accesses source selection, projector help information, and other features) 17 Freeze button (stops video action) 18 Volume up/down buttons (adjust speaker volume) 19 Pointer button (activates on-screen pointer) 20 Esc button (cancels/exits functions and controls wireless mouse functions) 21 ID button (selects which projector you want to control) 22 Color Mode button (selects display modes) 23 MHL Menu button (displays settings or performs functions for the MHL device; Pro EX7260/Pro EX9210/Pro EX9220) 24 LAN button (cycles through connected network sources) 25 USB button (cycles through connected USB sources) 26 Source Search button (searches for connected sources) 24 27 Remote control signal emitter (emits remote control signals) Parent topic: Projector Part Locations 25 Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location. Keep these considerations in mind as you select a projector location: • Place the projector on a sturdy, level surface or install it using a compatible mount. • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents. • Position the projector within reach of a grounded electrical outlet or extension cord. Projector Setup and Installation Options Projection Distance Parent topic: Setting Up the Projector Projector Setup and Installation Options You can set up or install your projector in the following ways: Front 26 Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system. Parent topic: Projector Placement 27 Related references Projector Setup Settings - Extended Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean). 1 Projection distance 2 Distance from the center of the lens to the base of the image 3 Center of lens 28

EX3260/VS250 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Wide to Tele Offset from lens center (2) 50 inches 58 to 79 inches (147 to 200 cm) –3.3 inches (–8 cm) 80 inches 93 to 126 inches (237 to 321 cm) –5.2 inches (–13 cm) 100 inches 117 to 158 inches (297 to 401 cm) –6.5 inches (–17 cm) 150 inches 176 to 237 inches (446 to 603 cm) –9.8 inches (–25 cm) EX5260/VS350PowerLite X41+/X05+ 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Wide to Tele Offset from lens center (2) 50 inches 59 to 71 inches (150 to 180 cm) –3.3 inches (–8 cm) 80 inches 95 to 114 inches (241 to 290 cm) –5.3 inches (–14 cm) 100 inches 119 to 143 inches (302 to 363 cm) –6.7 inches (–17 cm) 150 inches 179 to 215 inches (454 to 546 cm) –10 inches (–25 cm) 29 Pro EX7260/VS355 16:10 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Wide to Tele Offset from lens center (2) 50 inches 55 to 66 inches (139 to 168 cm) –2.4 inches (–6 cm) 80 inches 88 to 106 inches (225 to 270 cm) –3.8 inches (–10 cm) 100 inches 111 to 133 inches (281 to 338 cm) –4.7 inches (–12 cm) 150 inches 167 to 200 inches (424 to 509 cm) –7.1 inches (–18 cm) Pro EX9210/Pro EX9220 16:10 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Wide to Tele Offset from lens center (2) 50 inches 58 to 71 inches (148 to 180 cm) –2.4 inch (–6 cm) 80 inches 94 to 114 inches (238 to 291 cm) –3.9 inches (–10 cm) 100 inches 118 to 143 inches (299 to 364 cm) –4.8 inches (–12 cm) 150 inches 177 to 216 inches (450 to 548 cm) –7.2 inches (–18 cm) Parent topic: Projector Placement 30

Projector Connections See these sections to connect the projector to a variety of projection sources. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly. Connecting to Computer Sources Connecting to Video Sources Connecting to External USB Devices Parent topic: Setting Up the Projector Related references Projector Setup Settings - Extended Menu Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector. Connecting to a Computer for USB Video and Audio Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for USB Mouse Control Connecting to a Computer for Sound Parent topic: Projector Connections Connecting to a Computer for USB Video and Audio If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a USB cable. Note: An HDMI connection is recommended for projecting content requiring high bandwidth. 1. Turn on your computer. 31 2. Connect the cable to your projector's USB-B port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 3. Connect the other end to any available USB port on your computer. 4. Do one of the following: • Windows 10/Windows 8.x: Click EPSON_PJ_UD when it appears on the desktop, then select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software. • Mac: The USB Display setup folder appears on your screen. Select USB Display Installer and follow the on-screen instructions to install the Epson USB Display software. Follow any on-screen instructions. You need to install this software only the first time you connect the projector to the computer. 32 The projector displays the image from your computer's desktop and outputs sound, if your presentation contains audio. Parent topic: Connecting to Computer Sources Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1. If necessary, disconnect your computer's monitor cable. 2. Connect the VGA computer cable to your computer's monitor port. 3. Connect the other end to a Computer port on the projector. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 33 Pro EX9210/Pro EX9220 4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Related tasks Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. 1. Connect the HDMI cable to your computer's HDMI output port. 34 2. Connect the other end to the projector's HDMI port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker. Parent topic: Connecting to Computer Sources Connecting to a Computer for USB Mouse Control If you connected your computer to a Computer, USB-B, or HDMI port on the projector, you can set up the remote control to act as a wireless mouse. This lets you control projection at a distance from your computer. To do this, connect the projector to your computer using a USB cable, if it is not connected already. 35 1. Connect the USB cable to your projector's USB-B port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 2. Connect the other end to any available USB port on your computer. 3. If necessary, configure your computer to work with an external USB mouse. See your computer documentation for details. Parent topic: Connecting to Computer Sources Related tasks Using the Remote Control as a Wireless Mouse Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's USB-B or HDMI port, you can still play sound through the projector's speaker system. Connect an optional stereo mini-jack adapter cable (with one 3.5 mm mini-plug and two RCA plugs). 36 1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or audio-out port. 2. Connect the other end to the projector's Audio ports. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Parent topic: Connecting to Computer Sources Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to an MHL-Compatible Device Connecting to a Component Video Source 37 Connecting to a Composite Video Source Connecting to a Video Source for Sound Parent topic: Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1. Connect the HDMI cable to your video source's HDMI output port. 2. Connect the other end to the projector's HDMI port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. 38 Parent topic: Connecting to Video Sources Connecting to an MHL-Compatible Device If you have an MHL-compatible smartphone or tablet, you can connect it to the projector using either an MHL cable or an HDMI cable with a device-compatible MHL adapter. If you have a device with a built-in MHL connector, plug it directly into the HDMI/MHL (Pro EX7260) or HDMI2/MHL (Pro EX9210/Pro EX9220) port. Note: Some connected devices may not charge when using an MHL adapter. 1. Connect the MHL cable or adapter to your device's Micro-USB port. 2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable. 3. Connect the other end of the cable to the projector's HDMI/MHL (Pro EX7260) or HDMI2/MHL (Pro EX9210/Pro EX9220) port. Pro EX7260 Pro EX9210/Pro EX9220 39 Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. Parent topic: Connecting to Video Sources Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to the Computer port on the projector. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 40 Pro EX9210/Pro EX9220 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Related tasks Connecting to a Video Source for Sound Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Connect the cable with the yellow connector to your video source's yellow video output port. 41 2. Connect the other end to the projector's Video port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Parent topic: Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using an RCA audio cable. 1. Connect the audio cable to your video source's audio-out ports. 42 2. Connect the other end of the cable to the projector's Audio port or ports. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Parent topic: Connecting to Video Sources Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source Disconnecting a USB Device or Camera From the Projector Parent topic: Projector Connections 43 Related topics Projecting a PC Free Presentation USB Device Projection You can project images and other content without using a computer or video device by connecting any of these devices to your projector: • USB flash drive • Digital camera or smartphone • USB hard drive • Multimedia storage viewer Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant. Note: USB hard drives must meet these requirements: • USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported) • Formatted in FAT or FAT32 • Self-powered by their own AC power supplies (bus-powered hard drives are not recommended) • Does not have multiple partitions You can project slide shows from image files on a connected USB device. Parent topic: Connecting to External USB Devices Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB-A port and use it to project images and other content. 1. If your USB device came with a power adapter, plug the device into an electrical outlet. 44 2. Connect the USB cable (or USB flash drive) to the projector's USB-A port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Selecting the Connected USB Source You can switch the projector's display to the source you connected to the USB-A port. 1. Make sure the connected USB source is turned on, if necessary. 45 2. Press the USB button on the remote control. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector. 1. If the device has a power button, turn off and unplug the device. 2. Disconnect the USB device or camera from the projector. Parent topic: Connecting to External USB Devices Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Remove the battery cover. 46 2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Setting Up the Projector 47 Opening the Lens Cover To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position. Parent topic: Setting Up the Projector 48 Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Controlling a Networked Projector Using a Web Browser Wireless Network Projection You can project over a wireless network. To do this, you must set up your projector and computer for wireless projection. After setting up the projector as described here, install the network software from the included CD or download the software and manuals as necessary. Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the Epson network software. Installing the Wireless LAN Module Using a QR Code to Connect a Mobile Device Using Quick Wireless Connection (Windows) Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Selecting Wireless Network Settings on Mac Setting Up Wireless Network Security Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Parent topic: Using the Projector on a Network Related references Additional Projector Software and Manuals Optional Equipment and Replacement Parts 49 Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the projector (EX3260/EX5260/Pro EX9210/VS250/VS350/VS355). Do not install any other type of wireless module. Note: The wireless LAN module is not included with the EX3260/VS250/VS350/VS355 and is optional. Note: You do not need the wireless LAN module for the Pro EX7260/Pro EX9220 since the wireless functionality is built-in. 1. Remove the wireless LAN module cover screw. 50 2. Insert the wireless LAN module into the USB-A port. 3. Attach the wireless LAN module cover and secure it using the screw you removed. The light on the wireless LAN module turns on when the module is installed and operating. The light flashes when the module is communicating over the network. Parent topic: Wireless Network Projection 51 Related references Optional Equipment and Replacement Parts Using a QR Code to Connect a Mobile Device After you select the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app. Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for more information. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 52 4. Select the Basic menu and press Enter. 5. Set the Display LAN Info setting to Text & QR Code. 6. Select Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Do one of the following: • Press the LAN button on the remote control. • Select Display the QR Code in the projector's Network menu. Your projector displays the QR code on the projection surface. Note: If you do not see the QR code after pressing the LAN button, press Enter to display it. 8. Start Epson iProjection on your mobile device. 9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for instructions. Parent topic: Wireless Network Projection Using Quick Wireless Connection (Windows) You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done. Note: A USB flash drive is not included with your projector. 53 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software. Note: See the online Epson iProjection Operation Guide (Windows/Mac) for instructions. 2. Turn on the projector. 3. Remove the wireless LAN module from the USB-A port (EX3260/EX5260/Pro EX9210/VS250/VS350/VS355). 4. Insert the USB key into the projector's USB-A port. EX3260/EX5260/Pro EX7260/VS250/VS350/VS355 Pro EX9210/Pro EX9220 You see a projected message that the network information update is complete. 5. Remove the USB key. 54 6. Reinsert the wireless LAN module into the projector (EX3260/EX5260/Pro EX9210/VS250/VS350/VS355). 7. Insert the USB key into a USB port on your computer. Note: In Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select Allow on the next screen. 8. Follow the on-screen instructions to install the Epson iProjection (Windows/Mac) software. Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need administrator authority to install the software. If it is not installed automatically, double-click MPPLaunch.exe in the USB key. After a few minutes, your computer image is displayed by the projector. If it does not appear, press the LAN or Source Search button on your remote control or restart your computer. 9. Run your presentation as necessary. 10. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, then remove the USB key from your computer. Note: You can share the USB key with other computers without disconnecting your computer. You may need to restart your computer to reactivate your wireless LAN connection. Parent topic: Wireless Network Projection Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector using its menu system. 1. Turn on the projector. 2. Press the Menu button. 55 3. Select the Network menu and press Enter. 4. Make sure the Wireless Mode setting is set to Wireless LAN On. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter. 56 7. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in the Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB; default password is admin.) • Moderator Password lets you enter a password up to 4 numbers long for accessing the projector as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app. • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. The projector displays a random keyword that you must enter from a computer using the Epson iProjection (Windows/Mac) software or an iOS or Android device using the Epson iProjection app. • Display Keyword lets you display a keyword on the projected image when accessing the projector from a computer using the Epson iProjection (Windows/Mac) software or an iOS or Android device using the Epson iProjection app. • Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices with the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them. 57 8. Select the Wireless LAN menu and press Enter. 9. Select the settings on the Wireless LAN menu as necessary for your network. 10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. After you complete the wireless settings for your projector, you need to select the wireless network on your computer, or iOS or Android device. Wireless LAN Menu Settings Parent topic: Wireless Network Projection Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Advanced Selects the type of wireless connection: Quick: lets you connect to multiple smartphones, tablets, or computers directly Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point 58 Setting Options Description Search Access Point To Search View Search for available wireless network access points in Advanced connection mode SSID Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is connecting to Security Open WPA2-PSK WPA/WPA2-PSK Selects the type of wireless security used in the wireless network (some options are only available when the Connection Mode setting is set to Advanced) Passphrase Between 8 to 63 alphanumeric characters Enter a paraphrase for the wireless network Channel 1ch 6ch 11ch In Quick connection mode, selects the frequency band (channel) used by the wireless LAN IP Settings DHCP IP Address Subnet Mask Gateway Address Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address SSID Display OnOff Selects whether to display the SSID on the network standby screen IP Address Display OnOff Selects whether to display the IP address on the network standby screen IPv6 Settings IPv6 Auto Configuration Use Temporary Address Selects the IPv6 settings when you connect the projector to the network using IPv6 Parent topic: Selecting Wireless Network Settings Manually 59 Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless utility software, access the Desktop and double-click the network icon on the Windows taskbar. 2. Do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. 3. Click Connect. Parent topic: Wireless Network Projection Selecting Wireless Network Settings on Mac Before connecting to the projector, select the correct wireless network on your Mac. 1. Click the AirPort icon on the menu bar at the top of the screen. 2. Make sure AirPort is turned on, then do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. Parent topic: Wireless Network Projection Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following security options to match the settings used on your network: • WPA/WPA2-PSK security (Advanced connection mode) • WPA2-PSK security (Advanced and Quick connection mode) Check with your network administrator for guidance on entering the correct information. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 60 4. Select the Wireless LAN menu and press Enter. 5. Select the Security setting and press Enter. 6. Select the security settings for your network. 7. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wireless Network Projection Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) You can send images to your projector from mobile devices such as laptops, smartphones, and tablets using Miracast technology or from a Windows computer (Pro EX9220). If your device supports Miracast, you do not need to install any additional software. Screen Mirroring Restrictions Selecting Screen Mirroring Settings Connecting for Screen Mirroring with Miracast Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer Parent topic: Wireless Network Projection 61 Screen Mirroring Restrictions Note the following when using Screen Mirroring features (Pro EX9220): • You cannot project an interlaced image. • You cannot play audio with more than 3 channels. • You cannot project images with a resolution above 1920 × 1080 and a frame rate above 30 fps. • You cannot project 3D video. • You cannot use extended Miracast features on Windows 8.1. • You may not be able to view contents with copyright protection using a Miracast connection. Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Selecting Screen Mirroring Settings You can select Screen Mirroring settings for your projector and then project images from your mobile device or computer (Pro EX9220). 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Set the Wireless Mode setting to Screen Mirroring On. 4. Select Screen Mirroring Settings and press Enter. 62 5. Select the Screen Mirroring Settings options as necessary. 6. When you finish selecting settings, select Set and follow the on-screen instructions to save your settings and exit the menus. 7. Press the Home button on the control panel or remote control. You see the Display Name you created on the Home screen. Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Connecting for Screen Mirroring with Miracast If your mobile device supports Miracast, you can connect it to the projector wirelessly and project images and sound (Pro EX9220). 1. Select the Screen Mirroring settings on your projector as necessary. 2. Press the LAN button on the remote control to switch to the Screen Mirroring source. You see the Screen Mirroring standby screen. 3. On your mobile device, use the Miracast function to search for the projector. Note: See your mobile device's documentation for information on accessing the Miracast function. You see a list of available devices. 4. Select your projector from the list. 5. If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image. 63 The projector displays the image from your mobile device. Caution: It may take some time to establish the connection. Do not disconnect the projector's power cord while it is connecting to your device. Doing so may cause your device to freeze or malfunction. Note: Depending on the mobile device, you may need to delete a device when connecting. Follow the on-screen instructions on your device. Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer You can set up your computer to wirelessly project images and play sound using Screen Mirroring (Pro EX9220). 1. Select the Screen Mirroring settings on your projector as necessary. 2. Press the LAN button on the remote control to switch to the Screen Mirroring source. You see the Screen Mirroring standby screen. 3. Do one of the following: • Windows 10: Open Action Center and select Connect. • Windows 8.x: Select Devices > Project > Add a wireless display. 4. Select your projector's Display Name from the list. 5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image. The projector displays the image from your computer or mobile device. Note: It may take some time to establish the connection. Do not disconnect the projector's power cord while it is connecting to your device. This may cause your device to freeze or malfunction. Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button. 64 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Notifications menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server setting. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25). 8. Enter the sender's email address as the From setting. 9. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses. Your e-mail address can be up to 32 alphanumeric characters long. 10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Network Projector E-mail Alert Messages 65 Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Parent topic: Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 66 4. Select the Notifications menu and press Enter. 5. Turn on the SNMP setting. 6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. If you want this projector to receive broadcasted messages over the network, select the Others menu and turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using Epson Projector Management (Windows only). 8. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using the Projector on a Network Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely. 67 Note: The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a web browser. Note: If you set Standby Mode to Communication On in the ECO menu, you can use a web browser to select settings and control projection even if the projector is in standby mode. 1. Make sure the projector is turned on. 2. Start your web browser on a computer or device connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen. 68 4. To select projector menu settings, select Advanced to display a list of options. Note: You may need to log in to access some of the options on the Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.) 5. To control projection remotely, select the Basic Control option from the Web Control screen. Note: If you see a log in window, enter your user name and password. (The default user name is EPSONREMOTE and the default password is guest.) You see a screen like this: 1 Power button control 69 2 Select an HDMI port source 3 Selects the USB Display source 4 Selects the USB device source 5 A/V Mute button control 6 Freeze button control 7 Page Up and Page Down button controls 8 Displays a QR code 9 Volume button controls 10 Selects the network source 11 Selects the Screen Mirroring source (Pro EX9220) 12 Selects the Computer port source 13 Selects a Video port source 14 Searches for connected sources 6. Select the icon corresponding to the projector function you want to control. Parent topic: Using the Projector on a Network Related references Projector Setup Settings - ECO Menu 70 Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image Focusing the Image Using the Focus Ring Remote Control Operation Selecting an Image Source Projection Modes Image Aspect Ratio Color Mode Controlling the Volume with the Volume Buttons Projecting a PC Free Presentation Turning On the Projector Turn on the computer or video equipment you want to use before you turn on the projector so it can display the image source. 1. Open the projector's lens cover. 71 2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 4. Press the power button on the projector or the remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up. Once the projector is warmed up, the Status light stops flashing and turns blue. Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children. If you do not see a projected image right away, try the following: • Verify the lens cover is open all the way. • Turn on the connected computer or video device. • Insert a DVD or other video media and press the play button, if necessary. • Change the screen output from the computer when using a laptop. • Press the Source Search button on the projector or remote control to detect the video source. • Press the button for the video source on the remote control. 72 • If the Home screen is displayed, select the source you want to project. Using the Home Screen Parent topic: Using Basic Projector Features Related tasks Selecting an Image Source Using the Home Screen You can select input sources and other frequently used options from the Home screen. 1. To display the Home screen, do one of the following: • Press the Home button on the control panel or remote control. • Turn on the projector with the Home Screen Auto Disp setting enabled. • Turn on the projector when no signal is received from the selected input source. 2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press Enter to select an option. 1 Select the video source you want to project 2 Display the Connection Guide 73 3 Display the Help screen 4 Display the projector's menus 5 Select customizable menu options 6 Depending on the projector, select to project two images from different image sources simultaneously or change the Power Consumption setting 7 Correct the image shape Note: Your Home screen may look different from the illustration shown here. You can select the customizable menu options using the Custom Function 1 and Custom Function 2 settings in the Extended menu. 3. Press the Home button to hide the Home screen. Parent topic: Turning On the Projector Related references Projector Setup Settings - Extended Menu Turning Off the Projector Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown. Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the projector. 1. Press the power button on the projector or the remote control. 74 The projector displays a shutdown confirmation screen. 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 3. To transport or store the projector, make sure Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing. 75 4. Close the projector's lens cover. Parent topic: Using Basic Projector Features Related references Projector Light Status Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 76 3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet. 1. Turn on the projector and display an image. 2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. 77 The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality. When you turn on automatic keystone correction in your projector's Settings menu, your projector automatically corrects vertical keystone effects when you reposition the projector. Correcting Image Shape with the Horizontal Keystone Slider Correcting Image Shape with the Keystone Buttons Correcting Image Shape with Quick Corner Parent topic: Using Basic Projector Features Correcting Image Shape with the Horizontal Keystone Slider You can use the projector's horizontal keystone slider to correct the shape of an image that is unevenly rectangular horizontally, such as when the projector is placed to the side of the projection area. 78 Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the horizontal keystone slider on the projector to correct the image shape. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display the pattern by pressing the User button on the remote control (if the test pattern is assigned to this button). 2. Adjust the slider until the image is evenly rectangular. After correction, your image is slightly smaller. Parent topic: Image Shape Correcting Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the keystone correction buttons on the projector to correct the image shape. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display the pattern by pressing the User button on the remote control (if the test pattern is assigned to this button). 79 2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape. 80


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply