Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: PowerLite® Pro G6750WU/G6800/G6900WU Quick Reference This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, see the online User’s Guide. e l ba c A G V- o t- C N B5 e l b a c t n e n o p m o c - o t - C NB e l ba c I DS e l ba c t n e n o p m o c - o t - A GV e l ba c A GV e l b a c te n r e ht E e l b a c kc a j i n i m o e r e t S e l b a c I M DH e l ba c t r o Py a l p s iD e l ba c o e di V e l ba c o e di V- S e l b a c o i d u a A CR Note: SDI is available for the PowerLite Pro G6900WU only.

Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the power button (projector) or On button (remote control). After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Changing the Language of the Projector Menus The default language of the projector’s menu system is English, but you can change it as necessary. 1. Press the Menu button to acess the projector’s menu system. 2. Select Extended and press . 3. Select Language and press . 4. Select your language and press . 5. When you’re done, press Menu to exit. Switching Between Image Sources Press the Search button or one of the source buttons (remote control), or the Source Search button (projector). Changing Screen Type Set the Screen Type setting to the screen’s aspect ratio. 1. Press the Menu button. 2. Select Extended > Display > Screen > Screen Type. 3. Select the screen’s aspect ratio. Note: The displayed image should match the screen’s size and shape. 4. When you’re done, press Menu to exit. Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary. Adjusting Image Position 1. Release the lens shift dial lock. 2. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image. 3. When you are done making adjustments, secure the lens shift dial lock. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet. Focusing and Zooming Turn the focus ring to sharpen the image. Turn the zoom ring to reduce/enlarge the image. W T Correcting Image Shape If your image is uneven on the sides, you can use the projector’s distortion correction features such as H/V-Keystone and Quick Corner® to adjust the shape. See the online User’s Guide. Making Other Image Adjustments For help on using the projector’s features to improve the image quality, see the online User’s Guide. You can also view information on how to adjust the image color, position, and edges (Edge Blending) when projecting from multiple projectors to create one seamless widescreen image. Turning the Projector Off Press the power (projector) or Standby (remote control) button to turn the projector off. If you see a confirmation message, press the power/Standby button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide. With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. Remote Control Map Turn the projector on Turn the projector off Select a source Automatically adjust computer image Change the aspect ratio Display a test pattern Freeze the image Open projector menus Navigate through menu settings; move pointer Select menu settings; left mouse button Activate split screen Move to next or previous image when projecting from a computer over the network Control volume Open menus assigned by user Use numeric keys to enter passwords, IP settings, etc. Hold down and use numeric keys to select projector to control Control one or all projectors Port to connect remote control cable Illuminate buttons temporarily Switch image sources Select color modes Temporarily turn off display and audio Cancel current operation or return to previous menu; right mouse button Reset menu settings to their default value Zoom in or out on part of an image Hold down and use numeric keys to enter numbers Display on-screen help

Troubleshooting If you see a blank screen or the message No signal • Make sure the power light on the projector is green and not flashing, and the lens cover is removed. • Make sure the cables are connected correctly. See the online User’s Guide. • You may need to change the image source. See “Switching Between Image Sources.” Also make sure the source device is turned on. If the projector and the notebook don’t display the same image Windows® Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. Mac OS X Open System Preferences and select Displays. Select the VGA Display or Color LCD option if necessary, then click the Arrange or Arrangement tab, and select the Mirror Displays checkbox. Where to Get Help Manuals For more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don’t have icons to the manuals, you can install them from the projector CD or go to the Epson® website, as described below. Internet support Visit (U.S.) or (Canada) where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Speak to a support representative To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at (U.S. sales) or (Canadian sales).

Replacement Parts Product Part number Replacement lamp (ELPLP76) V13H010L76 Air filter (ELPAF43) V13H134A43 You can purchase replacement parts from an Epson authorized reseller. See “Where to Get Help” inside this card for more information. EPSON, Instant Off, PowerLite, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.

© 2013 Epson America, Inc. 3/13 CPD-38732 Printed in XXXXXX *412460100* *412460100*







Leave a Reply