FREE ENGLISH EPSON ET-5880 (01) PDF USER GUIDE
FREE ENGLISH EPSON ET-5880 (01) PDF USER MANUAL
FREE ENGLISH EPSON ET-5880 (01) PDF OWNER GUIDE
FREE ENGLISH EPSON ET-5880 (01) PDF OWNER MANUAL
FREE ENGLISH EPSON ET-5880 (01) PDF REFERENCE GUIDE
FREE ENGLISH EPSON ET-5880 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH EPSON ET-5880 (01) PDF REFERENCE MANUAL
FREE ENGLISH EPSON ET-5880 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH EPSON ET-5880 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD EPSON ET-5880 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
EPSON ET-5880 (01) PDF SUMMARY:
What should I do if an error message appears?
Turn off the product and check that no protective material has been left inside the product and that the transportation lock is in the printing position.
How do I select my language, country, date, and time settings?
Select your language, country, date, and time settings. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide.
How do I continue ink charging after selecting my settings?
Follow steps 12 and 13 to continue ink charging.
What do I do when the message to see the Start Here sheet appears on the LCD screen?
Press and hold OK for 5 seconds.
What do I do when the ink confirmation message appears on the LCD screen?
Select Proceed for each color, then press Start to start charging the ink. Ink charging takes approximately 9 minutes. A message appears when ink charging is complete. Press Close to proceed with initial setup. Note: Part of the ink from the included bottles is used for printer setup. You will notice ink levels in the tanks decrease during charging. This decrease is normal and does not affect the stated in-box yields.
What should I not do while the product is charging ink?
Do not unplug or turn off the product, raise the scanner unit, or load paper while the product is charging or you’ll waste ink.
How do I finish filling the ink tanks?
Repeat steps 1 through 8 using the additional set of ink bottles included with the product. If any ink remains in the bottles, close the bottles and store them for later use. Note: Replace the bottle cap before disposing of the bottles.
What should I do before loading paper?
Make sure the product is not charging ink, then pull out the paper cassette.
What should I be sure to do before using the product?
Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
What are some important safety instructions for using the product?
- Do not use the Epson® product near water.
- Always keep this guide handy.
- Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
- Do not use a telephone to report a gas leak in the vicinity of the leak.
What type of telecommunication line cord should I use?
To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord.
What should I do before unpacking the ink bottles?
Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.
What is the first step when unpacking the product?
Remove all protective materials from the product.
What is the correct position for the transportation lock during shipping?
The printer ships with the transportation lock in the printing position. Do not move it from the printing position.
What is the next step after removing the protective materials?
Lower the scanner unit.
What is the warning regarding the ink bottles?
Keep the ink bottles out of the reach of children and do not drink the ink.
What are some cautions regarding handling ink?
- This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains.
- If ink gets on your clothes or belongings, it may not come off.
What does Epson say about third-party ink?
Epson cannot guarantee the quality or reliability of third-party ink.
What ink bottles should I use for setting up the product?
Use the ink bottles included with the printer to set up the product. The included ink bottles are designed for reliable printer setup and cannot be resold.
What type of inks does Epson recommend using?
Epson recommends the use of Genuine Epson T542 pigment inks. The use of any other inks may cause damage not covered by the warranty, particularly if they are not pigment. Epson cannot guarantee that non-Epson T542 inks are pigment, even if labeled as compatible.
How do I prepare to fill the black ink tank?
Open the ink tank cover, then open the cap for the black ink tank. Note: Refer to the color-coded sticker on the ink tank unit to identify the color of each tank.
How do I unpack the black ink bottle?
Unpack the black (BK) ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it.
What should I avoid doing when handling ink bottles?
- Do not shake or squeeze the ink bottles.
- Do not touch the top of the ink bottle after its cap is removed.
How should I insert the ink bottle into the tank?
Do not force the bottle into position; each bottle is keyed for each color.
What do I do when filling the ink tank?
- Wait for the ink to fill the tank.
- Do not squeeze the bottle.
What should I do if the ink does not flow from the bottle?
If ink does not flow from the bottle, lift and reinsert the bottle.
What do I do when the ink bottle is empty?
- Remove the ink bottle and replace the bottle cap.
- Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.
What is the next step after filling the black ink tank?
Close the black ink tank cap.
What should I do after filling the black ink tank?
Repeat the previous steps for the other colors.
What is the last step for filling the ink tanks?
Close the ink tank cover.
How do I connect the power?
Connect the power cord to the back of the product and to an electrical outlet.
What is the first step for installing the software?
Make sure the product is NOT CONNECTED to your computer.
What should I do if I see a Found New Hardware screen on my Windows computer?
Click Cancel and disconnect the USB cable.
How do I get the product software?
- Insert the product CD (Windows only) or download and run your product’s software package.
- For the latest software, visit http://www.epson.com/support (U.S.) or http://www.epson.ca/support (Canada) and search for your product.
What is the next step after obtaining the software?
Follow the instructions on the computer screen to run the setup program.
What options are available for selecting your connection?
- Wireless connection
- Direct USB connection
- Wired network connection *PCL or PostScript driver
What do I need to do if the wireless setup is unsuccessful?
If setup is unsuccessful, you may need to enter your network name (SSID) and password.
What do I need for a direct USB connection?
Make sure you have a USB cable (not included).
What do I need for a wired network connection?
Make sure you have an Ethernet cable (not included).
What do I need to do to print from my smartphone or tablet using iOS or Android with Epson iPrint?
Simply connect your printer and device to the same network and tap the action icon to select the print option.
How do I print directly from my Android device (v4.4 or later)?
Simply connect your printer and device to the same network and tap the menu icon to select the print option.
Where can I learn more about Epson Connect?
Learn more at http://www.epson.com/connect (U.S.) or http://www.epson.ca/connect (Canada).
How do I use voice-activated assistants to print?
Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See http://www.epson.com/voice (U.S.) or http://www.epson.ca/voice (Canada) for more information.
What apps might be required for mobile printing?
May require the Epson Print Enabler or Mopria Print Service app from Google Play™.
How do I load paper in the paper cassette?
- Insert paper with the glossy or printable side facedown.
- Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.
- Slide the side edge guides against the paper but not too tightly.
- Do not load paper above the arrow mark on the side edge guide.
- Keep the cassette flat as you insert it all the way.
- Select the paper settings on the product’s control panel.
How do I connect the fax line?
Connect a phone cord to a telephone wall jack and to the LINE port on your product. See the online User’s Guide for more information.
What should I do on the LCD screen after connecting the fax line?
Select Proceed on the LCD screen to set up the fax, or select Close to set it up later.
What should I do if network setup was unsuccessful?
- Make sure you select the right network name (SSID).
- Restart your router (turn it off and then on), then try to connect to it again.
- If you see a firewall alert message, click Unblock or Allow to let setup continue.
- If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case.
- Print a network connection report to identify network problems and solutions. See your online User’s Guide for instructions.
What should I do if there are lines or incorrect colors in my printouts?
Run a nozzle check to see if there are any gaps in the printout. Then clean the print head, if necessary. See the online User’s Guide for more information.
What should I do if the product’s screen is dark?
Make sure your product is turned on and touch the LCD screen to wake it from sleep mode.
What should I do if the setup is unable to find my product after connecting it with a USB cable?
Make sure your product is on and securely connected.
Where can I find the User’s Guide on my computer? *Windows: Click the icon on your desktop or Apps screen to access the online User’s Guide. *Mac: Click the icon in Applications/Epson Software/Guide to access the online User’s Guide.
Where can I get technical support?
Visit http://www.epson.com/support (U.S.) or http://www.epson.ca/support (Canada) and search for your product to download drivers, view videos and manuals, get FAQs, or contact Epson.
What is Epson’s phone number for technical support?
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Where can I find information on how to recycle Epson products?
Please go to http://www.epson.com/recycle (U.S.) or http://www.epson.ca/recycle (Canada) for information on how to return your products for proper disposal.
Where can I find Epson papers and Epson Genuine Ink?
Find Epson papers and Epson Genuine Ink at http://www.epson.com (U.S. sales) or http://www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).
What are the replacement ink names and numbers for the ET-5800/ET-5850/ET-5880?
Color Ultra high-capacity Black T542 Cyan T542 Magenta T542 Yellow T542
CLICK HERE TO DOWNLOAD EPSON ET-5880 (01) PDF MANUAL