EPSON EB-X130 (02) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD EPSON EB-X130 (02) PDF MANUAL


PDF Content Summary: User's Guide 2 Contents Notations Used in This Guide 6 Connecting to a Composite Video Source..................................................................... 26 Connecting to External USB Devices..................................................................................... 27 Introduction to Your Projector 7 USB Device Projection........................................................................................................... 27 Connecting to a USB Device ............................................................................................... 27 Disconnecting a USB Device............................................................................................... 28 Projector Features.............................................................................. 8 Connecting to a Document Camera...................................................................................... 28 Quick and Easy Setup..................................................................................................................... 8 Installing Batteries in the Remote Control.................................... 29 Easy Wireless Projection................................................................................................................ 8 Flexible Connectivity...................................................................................................................... 9 Remote Control Operation.............................................................. 30 Connect with Computers........................................................................................................ 9 Opening the Lens Cover.................................................................. 31 Connect with Mobile Devices............................................................................................. 10 Projector Parts and Functions ........................................................ 11 Using Basic Projector Features 32 Projector Parts - Front.................................................................................................................. 11 Projector Parts - Rear.................................................................................................................... 12 Turning On the Projector................................................................ 33 Projector Parts - Base................................................................................................................... 13 Home Screen................................................................................................................................... 34 Projector Parts - Control Panel................................................................................................. 14 Projector Parts - Remote Control ............................................................................................ 15 Turning Off the Projector................................................................ 36 Selecting the Language for the Projector Menus......................... 37 Setting Up the Projector 18 Projection Modes............................................................................. 38 Changing the Projection Mode Using the Remote Control.......................................... 38 Projector Placement ........................................................................ 19 Changing the Projection Mode Using the Menus............................................................ 38 Projector Setup and Installation Options............................................................................. 19 Adjusting the Image Height............................................................ 40 Projection Distance....................................................................................................................... 20 Image Shape..................................................................................... 41 Projector Connections..................................................................... 21 Auto V-Keystone............................................................................................................................ 41 Connecting to a Computer........................................................................................................ 21 Correcting the Image Shape with the Horizontal Keystone Slider............................. 41 Connecting to a Computer for VGA Video and Audio.............................................. 21 Correcting the Image Shape with the Keystone Buttons.............................................. 42 Connecting to a Computer for USB Video and Audio............................................... 22 Correcting the Image Shape with Quick Corner............................................................... 43 Connecting to a Computer for HDMI Video and Audio........................................... 23 Connecting to Smartphones or Tablets................................................................................ 23 Connecting to Video Sources................................................................................................... 24 Resizing the Image with the Zoom Ring........................................ 46 Resizing the Image with the Buttons............................................. 47 Connecting to an HDMI Video Source ............................................................................ 24 Focusing the Image Using the Focus Ring..................................... 48 Connecting to a Component-to-VGA Video Source.................................................. 25 Connecting to an S-Video Video Source........................................................................ 26 Selecting an Image Source.............................................................. 49 Image Aspect Ratio.......................................................................... 51 3 Contents Changing the Image Aspect Ratio.......................................................................................... 51 Projector Security Features............................................................. 76 Available Image Aspect Ratios................................................................................................. 51 Password Security Types............................................................................................................ 76 Projected Image Appearance with Each Aspect Mode.................................................. 52 Setting a Password.................................................................................................................. 76 Color Mode ....................................................................................... 53 Selecting Password Security Types................................................................................... 77 Changing the Color Mode ......................................................................................................... 53 Entering a Password to Use the Projector..................................................................... 78 Available Color Modes................................................................................................................. 53 Locking the Projector's Buttons............................................................................................... 78 Setting Auto Iris............................................................................................................................. 53 Unlocking the Projector's Buttons.................................................................................... 79 Controlling the Volume with the Volume Buttons....................... 55 Installing a Security Cable.......................................................................................................... 80 Adjusting Projector Features 56 Using the Projector on a Network 81 Projecting Two Images Simultaneously ........................................ 57 Unsupported Input Source Combinations for Split Screen Projection..................... 58 Split Screen Projection Restrictions........................................................................................ 59 Wireless Network Projection........................................................... 82 Installing the Wireless LAN Module ....................................................................................... 82 Selecting Wireless Network Settings Manually.................................................................. 83 Selecting Wireless Network Settings in Windows............................................................ 85 Projecting a PC Free Presentation.................................................. 60 Selecting Wireless Network Settings in OS X...................................................................... 85 Supported PC Free File Types................................................................................................... 60 Setting Up Wireless Network Security................................................................................... 85 Precautions on PC Free Projection......................................................................................... 60 Starting a PC Free Slide Show.................................................................................................. 61 Starting a PC Free Movie Presentation ................................................................................. 62 Using a QR Code to Connect a Mobile Device............................... 87 Using Quick Wireless Connection (Windows Only)....................... 89 PC Free Display Options............................................................................................................. 63 Shutting Off the Image and Sound Temporarily .......................... 65 Monitoring and Controlling the Projector 90 Stopping Video Action Temporarily .............................................. 66 Zooming Images............................................................................... 67 Using the Remote Control as a Wireless Mouse............................ 68 Using the Remote Control as a Pointer.......................................... 70 EasyMP Monitor ............................................................................... 91 Controlling a Networked Projector Using a Web Browser........... 92 Setting Up Projector Network E-Mail Alerts.................................. 94 Network Projector E-mail Alert Messages............................................................................ 94 Saving a User's Logo Image ............................................................ 71 Setting Up Monitoring Using SNMP............................................... 95 Color Difference Correction when Projecting from Multiple Projectors.......................................................................................... 73 Using ESC/VP21 Commands ........................................................... 96 Setting Up for Using ESC/VP21 Commands........................................................................ 96 Setting the Projector ID .............................................................................................................. 73 ESC/VP21 Command List............................................................................................................ 96 Selecting the Projector You want to Operate.................................................................... 73 Communications Protocol......................................................................................................... 96 Matching Multiple-Projector Display Quality..................................................................... 75 4 Contents Adjusting the Menu Settings 98 Air Filter and Vent Maintenance.................................................. 125 Cleaning the Air Filter and Vents.......................................................................................... 125 Using the Projector's Menus ........................................................... 99 Replacing the Air Filter............................................................................................................. 125 Using the On-screen Keyboard..................................................... 100 Projector Lamp Maintenance ....................................................... 127 Available Text Using the On-screen Keyboard................................................................ 100 Replacing the Lamp................................................................................................................... 127 Image Quality Settings - Image Menu ......................................... 101 Input Signal Settings - Signal Menu............................................. 103 Resetting the Lamp Timer....................................................................................................... 130 Replacing the Remote Control Batteries..................................... 132 Projector Feature Settings - Settings Menu................................ 105 Solving Problems 133 Projector Setup Settings - Extended Menu................................. 107 Projector Network Settings - Network Menu.............................. 109 Projection Problems ...................................................................... 134 Network Menu - Basic Menu .................................................................................................. 109 Projector Indicators Status ........................................................... 135 Network Menu - Wireless LAN Menu.................................................................................. 110 Network Menu - Security Menu............................................................................................ 111 Network Menu - Mail Menu.................................................................................................... 112 Using the Projector Help Displays................................................ 137 Solving Image or Sound Problems............................................... 138 Network Menu - Others Menu............................................................................................... 113 Solutions When No Image Appears..................................................................................... 138 Network Menu - Reset Menu.................................................................................................. 113 Solutions When Image is Incorrect Using the USB Display Function..................... 138 Projector Setup Settings - ECO Menu .......................................... 115 Projector Information Display - Info Menu................................. 116 Solutions When "No Signal" Message Appears............................................................... 139 Displaying From a Laptop.................................................................................................. 139 Displaying From a Mac Laptop........................................................................................ 139 Info Menu - Projector Info Menu .......................................................................................... 116 Solutions When "Not Supported" Message Appears.................................................... 140 Event ID Code List................................................................................................................. 117 Solutions When Only a Partial Image Appears................................................................ 140 Projector Reset Options - Reset Menu......................................... 118 Solutions When the Image is not Rectangular................................................................ 140 Copy Menu Settings to Another Projector (Batch Setup).......... 119 Performing Batch Setup Using a USB Flash Drive.......................................................... 119 Performing Batch Setup Using a USB Cable..................................................................... 120 Batch Setup Error Notification ......................................................................................... 121 Solutions When the Image Contains Noise or Static..................................................... 141 Solutions When the Image is Fuzzy or Blurry.................................................................. 141 Solutions When the Image Brightness or Colors are Incorrect................................. 142 Solutions to Sound Problems................................................................................................. 142 Solutions When Image File Names are not Displayed Correctly in PC Free......... 143 Maintaining the Projector 122 Solving Projector or Remote Control Operation Problems....... 144 Solutions to Projector Power or Shut-Off Problems...................................................... 144 Cleaning the Lens........................................................................... 123 Solutions to Problems with the Remote Control............................................................ 144 Solutions to Password Problems........................................................................................... 145 Cleaning the Projector Case.......................................................... 124 Solving Network Problems ........................................................... 146 5 Contents Solutions When You Cannot Access the Projector Through the Web................... 146 Solutions When Network Alert E-Mails are not Received............................................ 146 Solutions When the Image Contains Static During Network Projection............... 146 Appendix 147 Optional Accessories and Replacement Parts............................. 148 Optional Accessories................................................................................................................. 148 Replacement Parts...................................................................................................................... 148 Screen Size and Projection Distance............................................ 149 Supported Monitor Display Resolutions ..................................... 153 Projector Specifications ................................................................ 155 Connector Specifications......................................................................................................... 156 External Dimensions...................................................................... 157 USB Display System Requirements.............................................. 159 List of Safety Symbols (corresponding to IEC60950-1 A2)........ 160 Glossary .......................................................................................... 162 Notices ............................................................................................ 164 FCC Compliance Statement.................................................................................................... 164 Indication of the manufacturer and the importer in accordance with requirements of EU directive.................................................................................................. 165 Restriction of Use........................................................................................................................ 165 Operating System References................................................................................................ 165 Trademarks.................................................................................................................................... 165 Copyright Notice......................................................................................................................... 166 Copyright Attribution................................................................................................................ 166 Notations Used in This Guide Safety Symbols The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely. Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property. This symbol indicates information that, if ignored, could possibly result in personal injury or even death. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. Caution General Information Notations This label indicates procedures that may result in damage or injury if sufficient care is not taken. Attention This label indicates additional information that may be useful to know. [Button name] Indicates the name of the buttons on the remote control or the control panel. Example: [Esc] button Menu/Setting name Indicates projector menu and setting names. Example: Select the Image menu s Image > Advanced This label indicates links to the related pages. This label indicates a page where detailed information regarding a topic can be found. s Introduction to Your Projector Refer to these sections to learn more about your projector's features and part names. g Related Links • "Projector Features" p.8 • "Projector Parts and Functions" p.11 8 Projector Features This projector has a quick and easy setup, and flexible connectivity features. Easy Wireless Projection g Related Links • "Quick and Easy Setup" p.8 • "Easy Wireless Projection" p.8 • EasyMP Network Projection to share the projector over the network and project images from any of the computers on the network. • "Flexible Connectivity" p.9 See the EasyMP Network Projection Operation Guide for details. Quick and Easy Setup • Direct Power On feature to turn on the projector as soon as you plug it in. • Auto Power On feature to turn on the projector when the projector detects an image signal from the port you specified as the Auto Power On source. • Home screen feature to easily select an input source and useful functions. • Real-time, automatic vertical keystone correction always displays a rectangular screen (Auto V-Keystone). • Horizontal keystone adjuster allows you to quickly correct horizontal distortion in the projected image. • Epson iProjection to connect your projector and mobile device wirelessly using the app available on App Store or Google play. a Any fees incurred when communicating with the App Store or Google play are the responsibility of the customer. • EasyMP Multi PC Projection to project up to four images at the same time by splitting the projected screen. You can project images from computers g Related Links • "Auto V-Keystone" p.41 on the network, or from smartphones or tablet devices on which Epson iProjection is installed. • "Projector Setup Settings - Extended Menu" p.107 • "Turning On the Projector" p.33 • "Correcting the Image Shape with the Horizontal Keystone Slider" p.41 • "Correcting the Image Shape with Quick Corner" p.43 9 Projector Features g Related Links See the EasyMP Multi PC Projection Operation Guide for details. • "Wireless Network Projection" p.82 • "Using a QR Code to Connect a Mobile Device" p.87 Flexible Connectivity This projector supports a wide variety of easy-to-use connectivity options as shown below. g Related Links • "Connect with Computers" p.9 • "Connect with Mobile Devices" p.10 Connect with Computers Connect with one USB cable to project images and output audio (USB Display). • When projecting images using a wireless LAN, you must install the Epson 802.11b/g/n wireless LAN module, and then set up your a projector and computer for wireless projection (EB-W31/EB- X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EB- U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300). The Epson 802.11b/g/n wireless LAN module may not be included with your projector. • Some models have built-in wireless LAN modules (EB-U32/EB- W32). • You can download the necessary software and manuals from the following Web site: epson.com/ 10 Projector Features Connect with Mobile Devices • HDMI/MHL port to connect an MHL cable to the mobile device and to the projector. 11 Projector Parts and Functions The following sections explain the projector parts and their functions. Name Function A Air exhaust vent Exhaust vent for air used to cool the projector g Related Links internally. • "Projector Parts - Front" p.11 • "Projector Parts - Rear" p.12 Warning • "Projector Parts - Base" p.13 • "Projector Parts - Control Panel" p.14 Do not look into the vents. If the lamp explodes, gases may escape and small • "Projector Parts - Remote Control" p.15 fragments of glass may be scattered which could cause an injury. Contact a doctor if any fragments of broken glass are inhaled or get Projector Parts - Front into the eyes or mouth. All of the features in this guide are explained using illustrations of EB-W04 unless otherwise mentioned. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur. B A/V Mute slide lever Slide the knob to open and close the lens cover. C Foot release lever Press the foot release lever to extend and retract the front adjustable foot. D Lens cover Close when not using the projector to protect the lens. By closing it during projection you can hide the image and the sound. E Front adjustable foot When the projector is set up on a surface such as a desk, extend the foot to adjust the position of the image. F Lens Images are projected from here. G Remote receiver Receives signals from the remote control. H Horizontal keystone Corrects horizontal distortion in the projected image. adjuster I Air intake vent (air Takes in air to cool the projector internally. filter) J Air filter cover Open to access the air filter. 12 Projector Parts and Functions EB-U32/EB-U04/EB-U130 Name Function K Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. L Control panel Operates the projector. M Zoom ring Adjusts the image size. (EB-U32/EB- W32/EB-W31/EB- X36/EB-X31/EB- U04/EB-W04/EB- X04/EB-U130/EB- W130/EB-X130/EB- X350/EB-X300) N Focus ring Adjusts the image focus. O Lamp cover Open to access the projector's lamp. Name Function A Power inlet Connects the power cord to the projector. g Related Links B Wireless LAN module Secures the wireless LAN module cover. • "Projector Indicators Status" p.135 fixing screw • "Resizing the Image with the Zoom Ring" p.46 (EB-W31/EB- • "Focusing the Image Using the Focus Ring" p.48 X36/EB-X31/EB- S31/EB-W04/EB- X04/EB-S04/EB- Projector Parts - Rear W130/EB-X130/EB- S130/EB-X350/EB- EB-W32/EB-W31/EB-X36/EB-X31/EB-S31/EB-W04/EB-X04/EB-S04/EB- X300/EB-S300) W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300 C Audio ports Inputs audio from equipment connected to the Computer, S-Video, or Video port. D Video port Inputs composite video signals from video sources. E Remote receiver Receives signals from the remote control. F Speaker Outputs audio. 13 Projector Parts and Functions g Related Links Name Function • "Using the Remote Control as a Wireless Mouse" p.68 G HDMI port Inputs video signals from HDMI compatible video • "Installing a Security Cable" p.80 equipment and computers. (EB-X36/EB-X31/EB- • "Projecting a PC Free Presentation" p.60 S31/EB-W04/EB- The HDMI/MHL port can also input video signals X04/EB-S04/EB- from MHL (Mobile High-Definition) compatible W130/EB-X130/EB- mobile devices. Projector Parts - Base S130/EB-X350/EB- This projector is compatible with HDCP. X300/EB-S300) HDMI/MHL port (EB-W32/EB-W31) HDMI1, HDMI2/MHL port (EB-U32/EB-U04/EB- U130) H Computer port Inputs image signals from a computer and component video signals from other video sources. I S-Video port For S-video signals from video sources. (EB-W32/EB- W31/EB-X36/EB- X31/EB-S31/EB- W04/EB-X04/EB- S04/EB-W130/EB- X130/EB-S130/EB- X350/EB-X300/EB- S300) J USB-B port Connects a USB cable to the computer to project computer images or to use the Wireless Mouse function. K USB-A port Connects a USB memory device or a digital camera and projects movies or images using PC Free. Connects the optional Document Camera. Connects the wireless LAN module (EB-W31/EB- Name Function X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB- S04/EB-U130/EB-W130/EB-X130/EB-S130/EB- A Ceiling mount fixing Attach the optional ceiling mount here when X350/EB-X300/EB-S300). points (three points) suspending the projector from a ceiling. Connects the optional Quick Wireless Connection USB B Security cable Pass a commercially available wire lock through here Key. attachment point and lock it in place. 14 Projector Parts and Functions Name Function Name Function C Rear feet When the projector is set up on a surface such as a B [Enter] button [ ] Enters the current selection and moves to the next level desk, turn to extend and retract the feet to adjust the while displaying the projector's menu or help. horizontal tilt. Optimizes Tracking, Sync., and Position in the projector's Signal menu while projecting an analog D Front adjustable foot When the projector is set up on a surface such as a RGB signal from the Computer port. desk, extend the foot to adjust the position of the image. From now on, referred to as the [Enter] button. C Keystone adjustment Displays the Keystone screen allowing you to correct buttons and arrow keystone distortion. g Related Links buttons Selects menu items while displaying the projector's • "Installing a Security Cable" p.80 menu or help. D [Esc] button Stops the current function. Projector Parts - Control Panel Moves back to the previous menu level while displaying the projector's menu. E Volume buttons and • EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB- arrow buttons U04/EB-W04/EB-X04/EB-U130/EB-W130/EB- Wide/Tele buttons X130/EB-X350/EB-X300: : Decreases the volume. : Increases the volume. • EB-S31/EB-S04/EB-S130/EB-S300: : Enlarges the size of the projected image. : Reduces the size of the projected image. Corrects keystone distortion in the horizontal direction when the Keystone screen is displayed. Selects menu items while displaying the projector's menu or help. Name Function F [Menu] button Displays and closes the projector's menu. A [Source Search] Changes to the next input source. button G [Home] button Displays and closes the Home screen. H Turns the projector on or off. Power button [ ] From now on, referred to as the power button. I Indicators Indicates the projector's status. 15 Projector Parts and Functions g Related Links Projector Parts - Remote Control • "Home Screen" p.34 • "Input Signal Settings - Signal Menu" p.103 • "Projector Indicators Status" p.135 • "Correcting the Image Shape with the Keystone Buttons" p.42 16 Projector Parts and Functions Name Function Name Function A Turns the projector on or off. P [Home] button Displays and closes the Home screen. Power button [ ] From now on, referred to as the power button. Q [Freeze] button Pauses or resumes images. B [Computer] button Selects the Computer port as the image source. R [Volume] up/down Adjusts the speaker volume. buttons C [Video] button Switches the image source between the S-Video, Video and HDMI port. S [Pointer] button Displays the on-screen pointer. D Numeric buttons Enters numbers in the projector's menu while holding T [Esc] button Stops the current function. down the [Num] button. Moves back to the previous menu level while E [Auto] button Optimizes Tracking, Sync., and Position in the displaying the projector's menu. projector's Signal menu while projecting an analog Acts as a mouse's right button when using the Wireless RGB signal from the Computer port. Mouse function. F [Aspect] button Changes the aspect mode. U [ID] button Hold down this button and press the numeric buttons to select the ID for the projector you want to operate G [Num] button Hold down this button to enter numbers using the using the remote control. numeric buttons. V [Color Mode] button Changes the color mode. H [Menu] button Displays and closes the projector's menu. W [MHL Menu] button Displays the settings menu for the device linked to the I Arrow buttons Selects menu items while displaying the projector's projector's HDMI/MHL port. menu or help. X [LAN] button Switches the image source between the network J [Enter] button [ ] Enters the current selection and moves to the next level connected devices. while displaying the projector's menu or help. Acts as a mouse's left button when using the Wireless Y [USB] button Switches the image source between the USB Display Mouse function. and USB-A port. From now on, referred to as the [Enter] button. Z [Source Search] Changes to the next input source. button K [User] button Performs settings assigned in the User Button setting in the projector's Settings menu. a Remote control light Outputs remote control signals. emitting area L [Page] up/down Controls page up and down on your computer when buttons you connect a projector and computer using a USB cable or over a network. g Related Links Displays the previous or next screen while using the PC • "Image Aspect Ratio" p.51 Free feature. • "Color Mode" p.53 M [E-Zoom +/–] Zooms in or zooms out the image area. • "Input Signal Settings - Signal Menu" p.103 buttons • "Projector Setup Settings - Extended Menu" p.107 N [A/V Mute] button Turns the video and audio on or off temporarily. • "Projecting Two Images Simultaneously" p.57 • "Using the Remote Control as a Wireless Mouse" p.68 O [Split] button Projects two images from different image sources simultaneously by splitting the projected screen. • "Using the Remote Control as a Pointer" p.70 17 Projector Parts and Functions • "Connecting to a Computer" p.21 • "Projecting a PC Free Presentation" p.60 • "Using the Projector on a Network" p.81 Setting Up the Projector Follow the instructions in these sections to set up your projector. g Related Links • "Projector Placement" p.19 • "Projector Connections" p.21 • "Installing Batteries in the Remote Control" p.29 • "Remote Control Operation" p.30 • "Opening the Lens Cover" p.31 19 Projector Placement You can place the projector on almost any flat surface to project an image. If you cannot install the projector parallel to the screen, correct keystone distortion using the projector controls. You can also install the projector in a ceiling mount if you want to use it in a a fixed location. An optional ceiling mount is required when suspending the projector from a ceiling. Warning Note the following points when selecting a projector location: • You must install a ceiling mount when suspending the projector from a ceiling. • Place the projector on a sturdy, level surface or install it using a compatible If you do not install the projector correctly, it could fall and cause damage or mount. injury. • Do not use adhesives on the ceiling mount fixing points to prevent the screws from loosening, or use lubricants, oils, or similar substances on the projector; the projector case may crack causing it to fall from its ceiling mount. This could cause serious injury to anyone under the ceiling mount and could damage the projector. • Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature could rise and cause a fire. Attention • Do not operate the projector on its side. This may cause the projector to malfunction. • Leave plenty of space around and under the projector for ventilation, and • If you are using the projector at altitudes above 1500 m, set the High Altitude do not place it on top of or next to anything that could block the vents. Mode setting to On in the projector's Extended menu to ensure the projector's internal temperature is regulated properly. • Position the projector within reach of a grounded electrical outlet or s Extended > Operation > High Altitude Mode extension cord. • Place the projector parallel to the screen. g Related Links • "Projector Setup and Installation Options" p.19 • "Projection Distance" p.20 • "Image Shape" p.41 • "Projector Setup Settings - Extended Menu" p.107 • "Optional Accessories" p.148 Projector Setup and Installation Options You can set up or install your projector in the following ways: 20 Projector Placement Front/Rear a When correcting keystone distortion, your image is slightly smaller. Front Ceiling/Rear Ceiling g Related Links • "Screen Size and Projection Distance" p.149 When projecting from the ceiling or from the rear, make sure you select the correct Projection option in the projector's Extended menu. g Related Links • "Projection Modes" p.38 Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. See the Appendix for details about how far to place the projector from the screen based on the size of the projected image. 21 Projector Connections You can connect the projector to a variety of computer, video, and audio You can play sound through the projector's speaker system by connecting a sources to display presentations, movies, or other images, with or without commercially available RCA audio cable. sound. Illustrations in this section are of EB-W04. • Connect a computer that has a USB port, standard video output (monitor) a To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact port, or HDMI port. Apple for compatible adapter options. • For video projection, connect devices such as DVD players, gaming consoles, digital cameras, and smartphones with compatible video output ports. a Connect the VGA computer cable to your computer's monitor port. • If your presentation or video includes sound, you can connect audio input cables. b Connect the other end to a Computer port on the projector. • For slide shows or presentations without a computer, you can connect USB devices (such as a flash drive or camera) or the optional Epson document camera. g Related Links • "Connecting to a Computer" p.21 • "Connecting to Smartphones or Tablets" p.23 • "Connecting to Video Sources" p.24 • "Connecting to External USB Devices" p.27 • "Connecting to a Document Camera" p.28 Connecting to a Computer c Tighten the screws on the VGA connector. Follow the instructions in these sections to connect a computer to the projector. d Connect or your desktop's the audio speaker cable to or your audio-out laptop's port. headphone or audio-out jack, g Related Links • "Connecting to a Computer for VGA Video and Audio" p.21 • "Connecting to a Computer for USB Video and Audio" p.22 • "Connecting to a Computer for HDMI Video and Audio" p.23 Connecting to a Computer for VGA Video and Audio You can connect the projector to your computer using a VGA computer cable. The VGA computer cable may not be included with your projector. 22 Projector Connections e Connect the other end to the projector's Audio ports. c Turn on the projector. d Do one of the following to install the Epson USB Display software: aYou only need to install this software the first time you connect the projector to the computer. • Windows 2000: Double-click Computer > EPSON_PJ_UD > EMP_UDSE.EXE. • Windows XP: Wait as messages are displayed on your computer screen and the projector installs the Epson USB Display software on your computer. If it is not installed automatically, double-click My Computer > EPSON_PJ_UD > EMP_UDSE.EXE. Connecting to a Computer for USB Video and Audio • Windows Vista/Windows 7/Windows 8/Windows 8.1: Select Run If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port. This function EMP_UDSE.EXE in the dialog box that is displayed to install the Epson USB Display software. is called USB Display. The USB cable may not be included with your projector. • OS X: The Epson USB Display setup folder is displayed on your screen. Select USB Display Installer and follow the on-screen instructions to install the Epson USB Display software. If the USB a If you use a USB hub, the connection may not operate correctly. Connect the USB cable directly to the projector. Display Setup folder is not displayed automatically, double-click EPSON_PJ_UD > USB Display Installer. a Connect the cable to your projector's USB-B port. e Follow Do not any disconnect on-screen the instructions. USB cable or turn off the projector until the projector displays an image. a If you are using Windows 2000 or Windows XP and you see a message asking if you want to restart your computer, select No. The projector displays the image from your computer's desktop and outputs sound if your presentation contains audio. b Connect the other end to any available USB port on your computer. 23 Projector Connections a • If the projector does not project any images, do one of the following: • Windows: Click All Programs > EPSON Projector > Epson USB b Connect the other end to the projector's HDMI port. Display > Epson USB Display Ver.x.xx. • OS X: Double-click the USB Display icon in the Application folder. • When you finish projection, do one of the following: • Windows: Disconnect the USB cable. You do not need to operate Safely Remove Hardware. • OS X: Select Disconnect from the USB Display icon menu on the menu bar or Dock, and then disconnect the USB cable. g Related Links • "USB Display System Requirements" p.159 g Related Links • "Projector Setup Settings - Extended Menu" p.107 Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using Connecting to Smartphones or Tablets a commercially available HDMI cable and send the computer's audio with the projected image. You can connect the projector to smartphones and tablets using a commercially available MHL cable and send the audio with the projected image (EB-U32/EB-W32/EB-W31/EB-U04/EB-U130). a To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. a • You may not be able to connect an MHL cable to all devices. • You may not be able to project correctly, depending on the model and settings of the smartphone or tablet. • To check if your smartphone or tablet device supports MHL, contact a Connect the HDMI cable to your computer's HDMI output port. the manufacturer of your smartphone or tablet device. a Connect the MHL cable to your device's MHL port. b Connect the other end to the projector's HDMI/MHL port. 24 Projector Connections EB-W32/EB-W31 a If images are not projected correctly, disconnect and then reconnect the MHL cable. Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Attention Check the shape and orientation of the connectors on any cable you plan to connect. Do not force a connector into a port if it does not fit. The device or your EB-U32/EB-U04/EB-U130 projector could be damaged or could malfunction. a If the port on the device you connect has an unusual shape, use the cable supplied with the device or an optional cable to connect to the projector. g Related Links • "Connecting to an HDMI Video Source" p.24 • "Connecting to a Component-to-VGA Video Source" p.25 • "Connecting to an S-Video Video Source" p.26 • "Connecting to a Composite Video Source" p.26 Attention Connecting to an HDMI Video Source If you connect an MHL cable that does not support the MHL standard, the smartphone or tablet device may become hot, or leakage or explosion may happen. If your video source has an HDMI port, you can connect it to the projector using a commercially available HDMI cable and send the image source's audio with the projected image. The connected smartphone or tablet begins charging when images are projected. If you connect using a commercially available MHL-HDMI conversion adapter, charging the smartphone or tablet device may not work or you may not be able to perform operations using the Attention Do not turn on the video source before connecting it to the projector. Doing so could damage the projector. projector's remote control. a Connect the HDMI cable to your video source's HDMI output port. 25 Projector Connections b Connect the other end to the projector's HDMI port. b Connect the VGA connector to a Computer port on the projector. g Related Links • "Projector Setup Settings - Extended Menu" p.107 c Tighten the screws on the VGA connector. Connecting to a Component-to-VGA Video Source d Connect the audio cable to your video source's audio-out ports. If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on e Connect the other end to the projector's Audio ports. your component ports, you may need to use an adapter cable along with a component video cable. You can play sound through the projector's speaker system by connecting a commercially available RCA audio cable. aMake sure the audio cable is labeled "No resistance". a Connect component the video component output connectors ports. to your video source's color-coded If your image colors appear incorrectly, you may need to change the Input a The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. Signal setting in the projector's Signal menu. s Signal > Advanced > Input Signal g Related Links • "Input Signal Settings - Signal Menu" p.103 26 Projector Connections d Connect the other end to the projector's Audio ports. Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using a commercially available S-Video cable (EB-W32/EB-W31/EB-X36/EB- X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB-S130/EB- X350/EB-X300/EB-S300). You can play sound through the projector's speaker system by connecting a commercially available RCA audio cable. Make sure the audio cable is labeled "No resistance". a Connecting to a Composite Video Source a Connect the S-Video cable to your video source's S-Video output port. If your video source has a composite video port, you can connect it to the b Connect the other end to the projector's S-Video port. projector using a commercially available RCA-style video or A/V cable. You can play sound through the projector's speaker system by connecting a commercially available RCA audio cable. Make sure the audio cable is labeled "No resistance". aa Connect the cable with the yellow connector to your video source's yellow video output port. b Connect the other end to the projector's Video port. c Connect the audio cable to your video source's audio-out ports. 27 Projector Connections c Connect the audio cable to your video source's audio-out ports. • Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class- a compliant. d Connect the other end to the projector's Audio ports. • USB hard drives must meet these requirements: • USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported) • Formatted in FAT or FAT32 • Self-powered by their own AC power supplies (bus-powered hard drives are not recommended) • Avoid using hard drives with multiple partitions You can project image files on a connected USB device using PC Free. g Related Links • "Projecting a PC Free Presentation" p.60 Connecting to External USB Devices Connecting to a USB Device Follow the instructions in these sections to connect external USB devices to You can connect your USB device to the projector's USB-A port and use it to the projector. project images and other content. g Related Links • "USB Device Projection" p.27 a If your USB device came with a power adapter, plug the device into an • "Connecting to a USB Device" p.27 electrical outlet. • "Disconnecting a USB Device" p.28 b Connect the USB cable (or USB flash drive or USB memory card reader) to the projector's USB-A port shown here. USB Device Projection You can project images and other content without using a computer or video device by connecting any of these devices to your projector: • USB flash drive • Digital camera or smartphone • USB hard drive • Multimedia storage viewer 28 Projector Connections Attention • Use the USB cable supplied with or specified for use with the device. • Do not connect a USB hub or a USB cable longer than 3 meters, or the device may not operate correctly. c Connect the other end to your device, if necessary. Disconnecting a USB Device When you have finished presenting with a connected USB device, disconnect the device from the projector. a Turn off and unplug the device, if necessary. b Disconnect the USB device from the projector. Connecting to a Document Camera You can connect a document camera to your projector to project images viewed by the camera. The connection method varies depending on your Epson document camera model. See the document camera manual for details. 29 Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Warning Check the positions of the (+) and (–) marks inside the battery holder to Attention ensure the batteries are inserted the correct way. If the batteries are not used Make sure you read the Safety Instructions before handling the batteries. correctly, they could explode or leak causing a fire, injury, or damage to the product. a Open the battery cover as shown. c Close the battery cover and press it down until it clicks into place. b Insert the batteries with the + and – ends facing as shown. 30 Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here. Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to a commands. If you are not going to use the remote control for a long time, remove the batteries. 31 Opening the Lens Cover a To open the projector's lens cover, slide the A/V Mute slide lever until it clicks. b To sound, cover close the the lens lens or temporarily cover. turn off the projected image and Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. g Related Links • "Turning On the Projector" p.33 • "Turning Off the Projector" p.36 • "Selecting the Language for the Projector Menus" p.37 • "Projection Modes" p.38 • "Adjusting the Image Height" p.40 • "Image Shape" p.41 • "Resizing the Image with the Zoom Ring" p.46 • "Resizing the Image with the Buttons" p.47 • "Focusing the Image Using the Focus Ring" p.48 • "Selecting an Image Source" p.49 • "Image Aspect Ratio" p.51 • "Color Mode" p.53 • "Controlling the Volume with the Volume Buttons" p.55 33 Turning On the Projector Turn on the computer or video equipment you want to use after you turn on the projector. c Open the projector's lens cover. a Connect the power cord to the projector's power inlet and plug it into an electrical outlet. Try the following if you do not see a projected image. • Verify the lens cover is open all the way. • Turn on the connected computer or video device. • Change the screen output from the computer when using a laptop computer. • Insert a DVD or other video media, and press play (if necessary). The projector's power indicator turns blue. This indicates that the projector is receiving power, but is not yet turned on (it is in standby mode). • Press the [Source Search] button on the control panel or remote control to detect the source. • Press the button for the desired video source on the remote control. b Press on the the projector. power button on the control panel or remote control to turn • If the Home screen is displayed, select the source you want to project. The projector beeps and the status indicator flashes blue as the projector warms up. Once the projector is warmed up, the status indicator stops flashing and turns blue. 34 Turning On the Projector • "Projector Setup Settings - ECO Menu" p.115 Warning • Never look into the projector lens when the lamp is on. This can damage your Home Screen eyes and is especially dangerous for children. • During projection, do not block the light from the projector with a book or other The Home screen feature allows you to easily select an image source and objects. If the light from the projector is blocked, the area on which the light access useful functions. You can display the Home screen by pressing the shines becomes hot which could cause it to melt, burn, or start a fire. Also, the [Home] button on the control panel or remote control. The Home screen is lens may get hot due to the reflected light which could cause the projector to also displayed when you turn on the projector and no signal is being input malfunction. To stop projection, use the A/V Mute function, or turn off the from the selected input source. projector. Press the arrow buttons on the control panel or remote control to select a • A mercury lamp with high internal pressure is used as the projector's light source. If the lamp is subjected to vibrations or shocks, or if it is used for an menu item, and then press [Enter]. overly extended length of time, the lamp may break or it may not turn on. If the lamp explodes, gases may escape and small fragments of glass may be scattered which could cause an injury. Be sure to observe the instructions below. • Do not disassemble or damage the lamp or subject it to any impacts. • Do not bring your face close to the projector while it is in use. • Particular care should be taken when the projector is installed to a ceiling, as small pieces of glass may fall down when the lamp cover is removed. When cleaning the projector or replacing the lamp yourself, be very careful not to allow such pieces of glass to get into the eyes or mouth. If the lamp breaks, ventilate the area immediately, and contact a doctor if any fragments of broken glass are inhaled or get into the eyes or mouth. • When the Direct Power On setting is set to On in the projector's Extended menu, the projector turns on as soon as you plug it in. a Note that the projector also turns on automatically in cases such as recovery from a power outage. s Extended > Operation > Direct Power On • If you select a specific port as the Auto Power On setting in the projector's Extended menu, the projector turns on as soon as it detects a signal or cable connection from that port. (Set Standby A Select the source you want to project. Mode to Communication On in the projector's ECO menu first.) B Displays the QR code and projects data on a smartphone or tablet device. s Extended > Operation > Auto Power On C Displays the Help screen. D Displays the projector's menu. g Related Links • "Home Screen" p.34 E Performs menu options assigned to Home Screen setting in the projector's • "Projector Setup Settings - Extended Menu" p.107 Extended menu. 35 Turning On the Projector F Projects two images from different image sources simultaneously by splitting the projected screen. G Corrects the shape of an image that is an uneven rectangle. aThe Home screen disappears after 10 minutes of inactivity. g Related Links • "Image Shape" p.41 • "Projector Setup Settings - Extended Menu" p.107 • "Using a QR Code to Connect a Mobile Device" p.87 • "Using the Projector's Menus" p.99 • "Using the Projector Help Displays" p.137 • "Connecting to a Computer" p.21 36 Turning Off the Projector Turn off the projector after use. c To transport or store the projector, make sure the power indicator is blue (but not flashing) and the status indicator is off, then unplug the power cord. Turn off this product when it is not in use to prolong the life of the projector. Lamp life varies depending on the mode selected, a environmental conditions, and usage. Brightness decreases over time. a Press the power button on the control panel or remote control. The projector displays a shutdown confirmation screen. b Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the status indicator d Close the projector's lens cover. turns off. With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away. a 37 Selecting the Language for the Projector Menus

If you want to view the projector's menus and messages in another language, you can change the Language setting. f Press [Menu] or [Esc] to exit the menus. a Turn on the projector. b Press the [Menu] button on the control panel or remote control. c Select the Extended menu and press [Enter]. d Select the Language setting and press [Enter]. e Select the language you want to use and press [Enter].

38 Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. Changing the Projection Mode Using the Menus • Front (default setting) lets you project from a table in front of the screen. You can change the projection mode to flip the image over top-to-bottom • Front/Ceiling flips the image over top-to-bottom to project upside-down and/or left-to-right using the projector menus. from a ceiling or wall mount. • Rear flips the image horizontally to project from behind a translucent screen. • Rear/Ceiling flips the image over top-to-bottom and horizontally to project a Turn on the projector and display an image. b Press the [Menu] button on the control panel or remote control. from the ceiling and behind a translucent screen. g Related Links • "Changing the Projection Mode Using the Remote Control" p.38 • "Changing the Projection Mode Using the Menus" p.38 • "Projector Setup and Installation Options" p.19 Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. c Select the Extended menu and press [Enter]. a Turn on the projector and display an image. b Hold down the [A/V Mute] button on the remote control for 5 seconds. The image disappears briefly and reappears flipped top-to-bottom. c To change projection back to the original mode, hold down the [A/V Mute] button for 5 seconds again.

39 Projection Modes d Select Projection setting and press [Enter]. e Select a projection mode and press [Enter]. f Press [Menu] or [Esc] to exit the menus. 40 Adjusting the Image Height If you are projecting from a table or other flat surface and the image is too A Extend the rear foot high or low, you can adjust the image height using the projector's adjustable B Retract the rear foot feet. The larger the angle of tilt, the harder it becomes to focus. Locate the projector so that it only needs to be tilted at a small angle. If the projected image is unevenly rectangular, you need to adjust the image a Turn on the projector and display an image. shape. b To adjust the front foot, pull up on the foot release lever and lift the g Related Links front of the projector. • "Image Shape" p.41 The foot extends from the projector. You can adjust the position up to 12 degrees. c Release the lever to lock the foot. d If the image is tilted, rotate the rear feet to adjust their height. 41 Image Shape You can project an even, rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilt it up or down, or off to the side, you Correcting the Image Shape with the Horizontal Keystone Slider may need to correct the image shape. g Related Links You can use the projector's horizontal keystone slider to correct the shape of an image that is an uneven horizontal rectangle, such as when the projector is • "Auto V-Keystone" p.41 placed to the side of the projection area.

• "Correcting the Image Shape with the Horizontal Keystone Slider" p.41 • "Correcting the Image Shape with the Keystone Buttons" p.42 • "Correcting the Image Shape with Quick Corner" p.43 Auto V-Keystone a Turn on the projector and display an image. b Adjust the slider until the image is an even rectangle.

When the projector is moved or tilted, Auto V-Keystone automatically corrects any vertical keystone distortion. When the projector is moved, it displays an adjustment screen and then automatically corrects the projected image. Auto V-Keystone can correct the projected image distortion in these conditions: • Projection angle is about 30o up or down After correction, your image is slightly smaller. • The Projection setting is set to Front in the projector's Extended menu a If you do not want to use the Auto V-Keystone function, set Auto V- Keystone to Off in the projector's Settings menu. s Settings > Keystone > H/V-Keystone > Auto V-Keystone a • When you use the horizontal keystone slider, set H-Keystone Adjuster to On in the projector's Settings menu. s Settings > Keystone > H/V-Keystone > H-Keystone Adjuster • You can also correct the shape of the image in the horizontal direction by pressing the [Menu] button on the remote control g Related Links • "Projection Modes" p.38 and selecting H/V-Keystone in the projector's Settings menu. s Settings > Keystone > H/V-Keystone • "Projector Feature Settings - Settings Menu" p.105 • "Projector Setup Settings - Extended Menu" p.107 42 Image Shape c Press a keystone button to adjust the image shape. Correcting the Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular. You can use keystone buttons to correct images up to 30o right, left, up, or down.a Turn on the projector and display an image. b Press one of the keystone adjustment buttons on the control panel to display the Keystone adjustment screen. After correction, your image is slightly smaller. If the projector is installed out of your reach, you can also correct the shape of the image by pressing the [Menu] button on the a remote control and selecting H/V-Keystone in the projector's Settings menu. s Settings > Keystone > H/V-Keystone 43 Image Shape g Related Links c Select the Settings menu and press [Enter]. • "Projector Feature Settings - Settings Menu" p.105 Correcting the Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular. d Select Keystone and press [Enter]. a Turn on the projector and display an image. b Press the [Menu] button on the control panel or remote control. 44 Image Shape e Select Quick Corner and press [Enter]. Press [Enter] again if necessary. a • If you see this screen, you cannot adjust the shape any further in the direction indicated by the gray triangle. You see the Quick Corner adjustment screen. f Use adjust. the Then arrow press buttons [Enter]. to select the corner of the image you want to • To reset the Quick Corner corrections, hold down [Esc] for about 2 seconds while the Quick Corner adjustment screen is displayed, and select Reset Quick Corner. Select Switch to H/V-Keystone to switch the image shape correction method to H/V-Keystone. g Press the arrow buttons to adjust the image shape as necessary. When you press [Enter], the Quick Corner adjustment screen is displayed. h Repeat steps 6 and 7 as needed to adjust any remaining corners. i When you are finished, press [Esc]. The Keystone setting is now set to Quick Corner in the projector's Settings menu. The next time you press the keystone adjustment buttons on the control panel, the Quick Corner adjustment screen is displayed. 45 Image Shape g Related Links • "Projector Feature Settings - Settings Menu" p.105 46 Resizing the Image with the Zoom Ring You can resize the image using the projector's zoom ring (EB-U32/EB- W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EB-U130/EB- W130/EB-X130/EB-X350/EB-X300). a Turn on the projector and display an image. b Rotate the zoom ring to enlarge or reduce the image. 47 Resizing the Image with the Buttons You can resize the image using the Wide and Tele buttons (EB-S31/EB- S04/EB-S130/EB-S300). a Turn on the projector and display an image. b Press the Wide button on the projector's control panel to enlarge the image size. Press the Tele button to reduce the image size. 48 Focusing the Image Using the Focus Ring You can correct the focus using the focus ring. EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-X04/EB- U130/EB-W130/EB-X130/EB-X350/EB-X300 EB-S31/EB-S04/EB-S130/EB-S300 49 Selecting an Image Source When multiple image sources are connected to the projector, such as a This screen is displayed when no image signal is detected. computer and DVD player, you can switch from one image source to the Check the cable connections between the projector and image a other. source. a Make sure the connected image source you want to use is turned on. b For video image sources, insert a DVD or other video media and press play. c Do one of the following: • Press the [Source Search] button on the control panel or remote control until you see the image from the source you want. • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources. A Computer port source (Computer port) B Video, S-Video, HDMI, and MHL sources (Video, S-Video, HDMI, and HDMI/MHL ports) C USB port sources (USB-B port and external devices connected to the USB-A port) D Network source (LAN) 50 Selecting an Image Source • Press the [Home] button on the control panel or remote control. Then select the source you want to use from the screen displayed. S-Video is available with the EB-W32/EB-W31/EB-X36/EB- X31/EB-S31/EB-W04/EB-X04/EB-S04/EB-W130/EB-X130/EB- a S130/EB-X350/EB-X300/EB-S300. 51 Image Aspect Ratio The projector can display images in different width-to-height ratios called To display images without black bars, set Resolution to Wide or aspect ratios. Normally, the input signal from your video source determines Normal in the projector’s Signal menu according to the computer’s a the image's aspect ratio. However, for certain images you can change the resolution. aspect ratio to fit your screen by pressing a button on the remote control. If you always want to use a particular aspect ratio for a certain video input g Related Links source, you can select it using the projector's Signal menu. • "Input Signal Settings - Signal Menu" p.103 g Related Links • "Changing the Image Aspect Ratio" p.51 Available Image Aspect Ratios • "Available Image Aspect Ratios" p.51 • "Projected Image Appearance with Each Aspect Mode" p.52 You can select the following image aspect ratios, depending on the input • "Input Signal Settings - Signal Menu" p.103 signal from your image source. Changing the Image Aspect Ratio • Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. a You can change the aspect ratio of the displayed image. • The Auto aspect ratio setting is available only for HDMI/MHL image sources. a Turn on the projector and switch to the image source you want to use. For projectors with a resolution of WUXGA (1920 × 1200) or WXGA b Press the [Aspect] button on the remote control. (1280 × 800) Aspect mode Description Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting. Normal Displays images using the full projection area and maintains the aspect ratio of the image. 16:9 Converts the aspect ratio of the image to 16:9. Full Displays images using the full size of the projection area, but does not maintain the aspect ratio. Zoom Displays images using the full width of the projection c To cycle through the available aspect ratios for your input signal, press area and maintains the aspect ratio of the image. the [Aspect] button repeatedly. Native Displays images as is (aspect ratio and resolution are maintained). 52 Image Aspect Ratio For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600) Aspect mode Aspect ratio for input signals 16:10 16:9 4:3 Aspect mode Description Native Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting. 4:3 Converts the aspect ratio of the image to 4:3. 16:9 Converts the aspect ratio of the image to 16:9. For projectors with a resolution of XGA (1024 × 768) or SVGA (800 × 600) Aspect mode Aspect ratio for input signals Projected Image Appearance with Each Aspect Mode 16:10 16:9 4:3 Black bands and cropped images may project in certain aspect ratios, Auto depending on the aspect ratio and resolution of your input signal. See the following table to confirm the position of black bands and cropped images. 4:3 The image for Native varies depending on the input signal. aFor projectors with a resolution of WUXGA (1920 × 1200) or WXGA 16:9 (1280 × 800) Aspect mode Aspect ratio for input signals 16:10 16:9 4:3 Normal Auto 16:9 Full Zoom 53 Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types. You can select the mode designed to match your image and environment, or a You can also set the Color Mode setting in the projector's Image menu. experiment with the available modes. g Related Links • "Changing the Color Mode" p.53 g Related Links • "Image Quality Settings - Image Menu" p.101 • "Available Color Modes" p.53 • "Setting Auto Iris" p.53 Available Color Modes Changing the Color Mode You can set the projector to use these Color Modes, depending on the input source you are using: You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. Color Mode Description a Turn on the projector and switch to the image source you want to use. b Press Color the Mode. [Color Mode] button on the remote control to change the Presentation Dynamic Cinema Best for color presentations and television images in a bright room, with vivid images in sharp contrast. Best for projecting in a bright room. This is the brightest mode. Best for movies projected in a dark room with natural tone images. sRGB Best for still images projected in a bright room that conform to the sRGB color standard. Blackboard Best for presentations onto a green chalkboard (adjusts the colors accordingly). Setting Auto Iris In Dynamic or Cinema color modes, you can turn on Auto Iris to The name of the Color Mode appears briefly on the screen and then image appearance changes. c To press cycle the through [Color Mode] all of the button available repeatedly. Color Modes for your input signal, automatically optimize the image based on the brightness of the content. a Turn on the projector and switch to the image source you want to use. 54 Color Mode b Press the [Menu] button on the control panel or remote control. d Select Auto Iris and press [Enter]. c Select the Image menu and press [Enter]. e Choose one of the following options and press [Enter]: • High Speed to adjust brightness as soon as the scene changes. • Normal for standard brightness adjustment. f Press [Menu] or [Esc] to exit the menus. 55 Controlling the Volume with the Volume Buttons The volume buttons control the projector's internal speaker system. You must adjust the volume separately for each connected input source. a Turn on the projector and start a presentation. b To control lower panel or raise or remote the volume, control press as shown. the [Volume] buttons on the a The [Volume] buttons on the control panel are available only with EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB- W04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300. A volume gauge appears on the screen. c To set the volume to a specific level for an input source, select Volume in the projector's Settings menu. Caution Do not start a presentation at a high volume setting. Sudden loud noises may cause hearing loss. Always lower the volume before powering off, so that you can power on and then gradually increase the volume. g Related Links • "Projector Feature Settings - Settings Menu" p.105 Adjusting Projector Features Follow the instructions in these sections to use your projector's adjustment features. g Related Links • "Projecting Two Images Simultaneously" p.57 • "Projecting a PC Free Presentation" p.60 • "Shutting Off the Image and Sound Temporarily" p.65 • "Stopping Video Action Temporarily" p.66 • "Zooming Images" p.67 • "Using the Remote Control as a Wireless Mouse" p.68 • "Using the Remote Control as a Pointer" p.70 • "Saving a User's Logo Image" p.71 • "Color Difference Correction when Projecting from Multiple Projectors" p.73 • "Projector Security Features" p.76 57 Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images a Press [Split] button on the remote control. from different image sources. You can control the split screen feature using the remote control or the projector menus. The currently selected input source moves to the left of the screen. You can perform the same operations from Split Screen in the projector's Settings menu. a b Press the [Menu] button. You see this screen: While using the split screen feature, other projector features may not be available and some settings may be automatically applied to both a images. 58 Projecting Two Images Simultaneously c To press select [Enter], an input select source the input for the source, other select image, Execute, select the and Source press [Enter]. setting, e To enlarge one image while reducing the other image, select Screen Size, press [Enter], select a size, press [Enter], and press [Menu] to exit. a Depending on the video input signals, the images may not appear at the same size even if you select Equal. f To option, select press the audio, [Enter], select and Audio press [Menu] Source, to press exit. [Enter], select an audio a • You can only select input sources that can be combined. • While using the split screen feature, the source screen appears when you change the input source from the remote control. a Select Auto to hear audio from the largest screen or the left screen. g To exit the split screen feature, press [Split] or [Esc]. d To The switch projected images, images select on Swap the left Screens and right and are press swapped. [Enter]. g Related Links • "Unsupported Input Source Combinations for Split Screen Projection" p.58 • "Split Screen Projection Restrictions" p.59 Unsupported Input Source Combinations for Split Screen Projection These input source combinations cannot be projected on a split screen. • Computer, Video and S-Video • USB Display, USB and LAN 59 Projecting Two Images Simultaneously Split Screen Projection Restrictions Operating restrictions The following operations cannot be performed during split screen projection. • Setting the projector's menu • E-Zoom • Switching the aspect mode (the aspect mode is set to Normal) • Operations using the [User] button on the remote control • Auto Iris a Help can only be displayed when no image signals are being input or when an error or warning notification is displayed. Image restrictions • If you make adjustments such as Brightness, Contrast, Color Saturation, Tint, and Sharpness in the projector's Image menu, you can apply them only to the image on the left. Default adjustments are applied to the image on the right. Adjustments that affect the entire projected image such as Color Mode and Color Temp. are applied for both left and right images. • Even if you make adjustments for Noise Reduction and Deinterlacing in the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing is set to Off for the image on the right. • Even if you set Display Background to Logo in the projector's Extended menu, the blue screen appears when no image signal is being input. g Related Links • "Image Aspect Ratio" p.51 • "Color Mode" p.53 • "Input Signal Settings - Signal Menu" p.103 • "Projector Feature Settings - Settings Menu" p.105 • "Projector Setup Settings - Extended Menu" p.107 • "Zooming Images" p.67 • "Setting Auto Iris" p.53 60 Projecting a PC Free Presentation You can use your projector's PC Free feature whenever you connect a USB device that contains compatible presentation files. This lets you quickly and File contents File type Details (extension) easily display a presentation and control it using the projector's remote control. Image .jpg Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution .bmp Make sure the file resolution is not above 1280 × 800 .gif Make sure the file is not: • Above 1280 × 800 resolution • Animated .png Make sure the file resolution is not above 1280 × 800 Movie .avi Make sure the file is not: g Related Links • "Supported PC Free File Types" p.60 (Motion JPEG) • Saved with an audio codec other than PCM or ADPCM • "Precautions on PC Free Projection" p.60 • Above 1280 × 720 resolution • "Starting a PC Free Slide Show" p.61 • Larger than 2 GB • "Starting a PC Free Movie Presentation" p.62 • "PC Free Display Options" p.63 Precautions on PC Free Projection Supported PC Free File Types Note the following precautions when using PC Free features. You can project these types of files using the projector's PC Free feature. • Do not disconnect the USB storage device while it is being accessed; otherwise, PC Free may not operate correctly. a • For best results, place your files on media that is formatted in FAT16/32. • If you have trouble projecting from media formatted for non- Windows file systems, try formatting the media for Windows instead. • You may not be able to use the security features on certain USB storage devices with PC Free features. • When connecting a USB device that includes an AC adapter, connect the AC adapter to an electrical outlet when you use the device with your projector. • Some commercially available USB card readers may not be compatible with the projector. • The projector can recognize up to 5 cards inserted into the connected card reader at one time. 61 Projecting a PC Free Presentation • You cannot correct keystone distortion while projecting in PC Free, so The PC Free file list screen is displayed. correct the image shape before you begin your presentation. • You can use the following functions while projecting in PC Free. • Freeze • A/V Mute • E-Zoom • Pointer g Related Links • "Stopping Video Action Temporarily" p.66 • "Shutting Off the Image and Sound Temporarily" p.65 • "Zooming Images" p.67 • "Using the Remote Control as a Pointer" p.70 Starting a PC Free Slide Show After connecting a USB device to the projector, you can switch to the USB input source and start your slide show. a • If the Select Drive screen is displayed, press the arrow buttons to select the drive and press [Enter]. • To display the Select Drive screen, highlight Select Drive at the a You can change the PC Free operation options or add special effects by highlighting Option at the bottom of the screen and pressing [Enter]. top of the file list screen and press [Enter]. a Press the [USB] button on the remote control. b Do one of the following to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press [Enter]. • To move back up a folder level on your device, highlight Back to Top and press [Enter]. • To view additional files in a folder, highlight Next Page or Previous Page and press [Enter], or press the [Page] up or down buttons on the remote control. c Do one of the following: • To display an individual image, press the arrow buttons to highlight the image and press [Enter]. (Press the [Esc] button to return to the file list screen.) 62 Projecting a PC Free Presentation • To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow option at the bottom of the screen f Turn off the USB device, if necessary, and then disconnect the device from the projector. and press [Enter]. a • You can change the image switching time by highlighting Option at the bottom of the screen and pressing [Enter]. • If any file names are longer than the display area or include g Related Links • "PC Free Display Options" p.63 • "Connecting to a USB Device" p.27 unsupported symbols, the file names may be shortened or changed only on the screen display. Starting a PC Free Movie Presentation d While projecting, use the following commands to control the display: • To rotate a displayed image, press the up or down arrow button. After connecting a USB device to the projector, you can switch to the USB input source and start your movie. aYou can change the PC Free operation options by highlighting Option at the bottom of the screen and pressing [Enter]. a Press the [USB] button on the remote control. The PC Free file list screen is displayed. • To move to the next or previous image, press the left or right arrow button. e To button. stop the display, follow the on-screen instructions or press the [Esc] You return to the file list screen. 63 Projecting a PC Free Presentation a • If the Select Drive screen is displayed, press the arrow buttons to select the drive and press [Enter]. PC Free Display Options • To display the Select Drive screen, highlight Select Drive at the You can select these display options when using PC Free. To access this top of the file list screen and press [Enter]. screen, highlight Option at the bottom of the PC Free file list screen and press [Enter]. b Do one of the following to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press [Enter]. • To move back up a folder level on your device, highlight Back to Top and press [Enter]. • To view additional files in a folder, highlight Next Page or Previous Page, and press [Enter], or press the [Page] up or down buttons on the remote control. c To play back a movie, press the arrow buttons to highlight the file and press [Enter]. a • If any file names are longer than the display area or include unsupported symbols, the file names may be shortened or changed only on the screen display. Setting Options Description • If you want to play back all the movies in a folder in sequence, select the Slideshow option at the bottom of the screen. Display Order Name Order Displays files in name order Date Order Displays files in date order d To press stop [Enter]. movie playback, press the [Esc] button, highlight Exit, and Sort Order In Ascending Sorts files in first-to-last order In Descending Sorts files in last-to-first order You return to the file list screen. Continuous Play On Displays a slide show continuously e Turn off the USB device, if necessary, and then disconnect the device from the projector. Off Screen Switching No Time Displays a slide show once Does not display the next file automatically 1 Second to 60 Seconds Displays files for the selected time g Related Links • "PC Free Display Options" p.63 • "Connecting to a USB Device" p.27 and switches to the next file automatically; high resolution images may switch at a slightly slower rate 64 Projecting a PC Free Presentation Setting Options Description Effect No No effect Wipe Transitions between images using a wipe effect Dissolve Transitions between images using a dissolve effect Random Transitions between images using a random variety of effects 65 Shutting Off the Image and Sound Temporarily You can temporarily turn off the projected image and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it. a • You can also stop projection using the A/V Mute slide lever on the projector. • The projector's power automatically turns off 30 minutes after A/V Mute is enabled. You can disable this feature in the projector's ECO menu. s ECO > Lens Cover Timer s ECO > A/V Mute Timer • The lamp is still operating during A/V Mute, so the lamp hours continue to accumulate. g Related Links • "Projector Setup Settings - Extended Menu" p.107 • "Projector Setup Settings - ECO Menu" p.115 a If you want to display an image such as a company logo or picture when the [A/V Mute] button is pressed, you can select the screen displayed in the A/V Mute setting in the projector's Extended menu. s Extended > Display > A/V Mute a Press projection the [A/V and Mute] mute any button sound. on the remote control to temporarily stop b To turn the image and sound back on, press [A/V Mute] again. 66 Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.a Press action. the [Freeze] button on the remote control to stop the video b To restart the video action in progress, press [Freeze] again. 67 Zooming Images You can draw attention to parts of a presentation by zooming into a portion The enlarged image is projected and the enlargement ratio is displayed of the image and enlarging it on the screen. on the screen. a Press the [E-Zoom +] button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. b Use image: the following buttons on the remote control to adjust the zoomed • Use the arrow buttons to position the crosshair in the image area you want to zoom into. To move the crosshair diagonally, press any pair of adjacent arrow buttons at the same time. • Press the [E-Zoom +] button repeatedly to zoom into the image area. Press and hold the [E-Zoom +] button to zoom in more quickly. The selected area can be enlarged to between one to four times in 25 incremental steps. • To pan around the zoomed image area, use the arrow buttons. • To zoom out of the image, press the [E-Zoom –] button. • To return to the original image size, press [Esc]. 68 Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can d Use the following buttons on the remote control to control your control projection at a distance from the computer. presentation: You can use the wireless mouse features with Windows 2000 and later, or OS X 10.3.x and later. aa Connect the projector to a computer using the projector's USB-B, Computer, or HDMI port. The wireless mouse function does not work when projecting images from a device connected to the HDMI/MHL port using a an MHL cable. b If you connected your computer to the port other than the USB-B port, also connect a USB cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse support). • To move through slides or pages, press the [Page] up or down buttons. c Start your presentation. • To move the cursor on the screen, use the arrow buttons. To move the cursor diagonally, press any pair of adjacent arrow buttons at the same time. • To left-click, press the [Enter] button once (press it twice to double- click). To right-click, press the [Esc] button. • To drag-and-drop, hold the [Enter] button as you move the cursor with the arrow buttons, then release [Enter] at the destination. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons is also reversed. a • The Wireless Mouse function does not work under the following conditions: • When the projector's menu or a Help screen is displayed. • When operating functions other than the Wireless Mouse function (such as adjusting the volume). However, when using the E-Zoom or Pointer function, the page up or down function is available. 69 Using the Remote Control as a Wireless Mouse g Related Links • "Zooming Images" p.67 • "Using the Remote Control as a Pointer" p.70 70 Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you focus your g Related Links audience on important information on the screen. The default pointer shape • "Projector Feature Settings - Settings Menu" p.105 is an arrow. You can change the shape in the Pointer Shape setting in the projector's Settings menu. a Press the [Pointer] button on the remote control. b Use pointer the diagonally, arrow buttons press to any move pair the of pointer adjacent on arrow the screen. buttons To at move the same the time. c Press [Esc] to remove the pointer from the screen. 71 Saving a User's Logo Image You can save an image on the projector and display it whenever the projector d Select User's Logo and press [Enter]. turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using A/V Mute). This image is called the user's logo screen. You can select a photo, graphic, or company logo as the user's logo, which is useful in identifying the projector's owner to help deter theft. You can prevent changes to the user's logo by setting up password protection. • Once you save a user's logo, you cannot return to the factory default logo. a • If the User's Logo Protection setting is set to On in the Password Protection menu, set to Off before saving the user's logo. • When you copy the menu settings from one projector to another using the batch setup feature, user's logo is also copied. Do not register the information that you do not want to share between multiple projectors as a user's logo. You see a prompt asking if you want to use the displayed image as a a Display the image you want to project as the user's logo. user's logo. b Press the [Menu] button on the control panel or remote control. Adjustments such as Keystone, E-Zoom, or Aspect are temporarily cancelled when you select User's Logo. a c Select the Extended menu and press [Enter]. e Select Yes and press [Enter]. You see a selection box overlaying your image. Depending on the current image signal, the screen size may change to match the resolution of the image signal. a 72 Saving a User's Logo Image f Use the user's the arrow logo buttons and press to [Enter]. surround the image area you want to use as i Select Yes and press [Enter]. The user's logo is overwritten and a completion message appears. j Press [Esc] to exit the message screen. k Select the Extended menu and press [Enter]. l Select Display and press [Enter]. m Select when you want to display the User's Logo screen: • To display it whenever there is no input signal, select Display You see a prompt asking if you want to select this image area. Background and set it to Logo. • To display it whenever you turn the projector on, select Startup a You cannot change the image area size (400 × 300 pixels). Screen and set it to On. • To display it whenever you press the [A/V Mute] button, select A/V g Select select No, Yes press and press [Enter], [Enter]. and repeat (If you the want last to step.) change the selected area, Mute and set it to Logo. To prevent anyone from changing the User's Logo settings without first You see the User's Logo zoom factor menu. entering a password, set the User's Logo Protection setting to On in the Password Protection menu and set the password. h Select a zoom percentage and press [Enter]. g Related Links • "Shutting Off the Image and Sound Temporarily" p.65 • "Selecting Password Security Types" p.77 You see a prompt asking if you want to save the image as the user's logo. 73 Color Difference Correction when Projecting from Multiple Projectors When lining up multiple projectors to project images, you can correct the brightness and color tone of each projector's image so that the images match d Use use for the the arrow projector. buttons Then to select press the [Enter]. identification number you want to closely. You can set a unique projector ID for each projector to operate them individually using a remote control, and then correct the brightness and color for each projector. a • In some cases the brightness and color tone may not match completely even after correction. • If brightness and color tone differences become more noticeable over time, repeat the adjustments. g Related Links • "Setting the Projector ID" p.73 • "Selecting the Projector You want to Operate" p.73 • "Matching Multiple-Projector Display Quality" p.75 Setting the Projector ID e Press [Menu] or [Esc] to exit the menus. Repeat these steps for all the other projectors you want to operate from one If you want to control multiple projectors from a remote control, give each remote control. projector a unique ID. a Press the [Menu] button on the control panel or remote control. b Select the Extended menu and press [Enter]. Selecting the Projector You want to Operate After setting the projector's ID, select the ID for the projector you want to operate using the remote control. c Select Projector ID and press [Enter]. 74 Color Difference Correction when Projecting from Multiple Projectors a Aim the remote control at the target projector and press the [ID] b While holding the [ID] button, press the number button that matches button. the ID of the projector you want to operate. The current Projector ID is displayed on the projected screen. It disappears after about 3 seconds. The projector you want to operate is selected. c Press the [ID] button to check if the ID-setting process worked. You see a message displayed by the projector. • If the remote control is listed as On, you can operate the projector from the remote control. • If the remote control is listed as Off, you cannot operate the projector from the remote control. Repeat the steps above to enable the remote control. • You must select the projector ID from the remote control each time you turn on the projector you have set it to control. When a you turn on the projector, 0 is selected as the remote control's projector ID. • When you set the Projector ID setting to Off, you can operate the projector using the remote control whichever ID you select on the remote control. • When you select 0 on the remote control, you can operate all projectors regardless the Projector ID setting. 75 Color Difference Correction when Projecting from Multiple Projectors Matching Multiple-Projector Display Quality You can match the display quality of multiple projectors that will project next to each other. a Turn quality. on all the projectors on which you want to match the display b Set ID numbers on each projector. c Make sure all the projectors are using the same Color Mode setting. d Select the remote control ID to match the first projector. e Press the [Menu] button, select the Image menu, and press [Enter]. f Select settings as necessary. g Select Image the menu remote adjustments control ID as necessary to match the to match next projector, the projectors' then repeat displays. 76 Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: Setting a Password • Password security to prevent people who do not know the password from To use password security, you must set a password. using the projector, and prevent changes to the startup screen and other settings. This acts as an anti-theft function as the projector cannot be used even if it is stolen, and you can limit who can use the projector. a The default password is set to "0000". Change this to your own password. • Button lock security to block operation of the projector using the buttons on the control panel. This is useful at events or shows when you want to deactivate all buttons during projection or at schools when you want to a Hold down the [Freeze] button on the remote control for about 5 seconds. limit button operation. • Security cabling to physically secure the projector in place. g Related Links • "Password Security Types" p.76 • "Locking the Projector's Buttons" p.78 • "Installing a Security Cable" p.80 Password Security Types You see the Password Protection setting menu. You can set up the following types of password security using one shared password: • Power On Protection password prevents anyone from using the projector without first entering a password. When plugging the power cord and a If Password Protection is already activated, you must enter the correct password to display the Password Protection setting menu. turning on the projector at first time, you must enter the correct password. This also applies to Direct Power On and Auto Power On. • User's Logo Protection password prevents anyone from changing the b Select Password and press [Enter]. custom screen displayed when the projector turns on, when no signal is being input, or when you use the A/V Mute feature. The custom screen discourages theft by identifying the projector's owner. • Network Protection password prevents anyone from changing the projector's Network settings. g Related Links • "Setting a Password" p.76 • "Selecting Password Security Types" p.77 • "Entering a Password to Use the Projector" p.78 77 Projector Security Features You see the prompt "Change the password?". Selecting Password Security Types c Select Yes and press [Enter]. After setting a password, you see this menu, allowing you to select the password security types you want to use. a If you select No, the Password Protection setting menu is displayed again. d Hold down the [Num] button on the remote control and use the numeric buttons to set a four-digit password. If you do not see this menu, hold down the [Freeze] button on the remote control for 5 seconds until the menu appears. • To prevent unauthorized use of the projector, select On as the Power On Protection setting. • To prevent changes to the User's Logo screen or related display settings, select On as the User's Logo Protection setting. The password displays as **** as it is entered. A confirmation prompt is displayed when you enter the fourth digit. e Enter the password again. You see the message "Password accepted". If you enter the password incorrectly, a message is displayed prompting you to re-enter the password. • To prevent changes to network settings, select On as the Network Protection setting. You can attach the password protect sticker to the projector as an additional theft deterrent. a Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the password. f Press [Esc] to return to the menu. g Make a note of the password and keep it in a safe place. 78 Projector Security Features Entering a Password to Use the Projector Attention When the password screen is displayed, enter the correct password. • If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately 5 minutes, and the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet, reinsert it, and turn the projector back on. The projector displays the password entry screen again so that you can enter the correct password. • If you have forgotten the password, make a note of the "Request Code: xxxxx" number that appears on the screen and contact Epson for help. • If you continue to repeat the above operation and input the wrong password 30 times in succession, the message "The projector's operation will be locked. Contact Epson as described in your documentation." is displayed and the projector does not accept any more password entries. Contact Epson for help. a Hold the password down the using [Num] the button numeric on buttons. the remote control while you enter Locking the Projector's Buttons You can lock the buttons on the control panel to prevent anyone from using the projector. You can lock all the buttons or all the buttons except the power button. The projector can still be operated using the remote control. a Press the [Menu] button on the control panel or remote control. The password screen closes. b If the password is incorrect, you see a message and a prompt to try again. Enter the correct password to proceed. 79 Projector Security Features b Select Settings and press [Enter]. d Select Control Panel Lock and press [Enter].

c Select Lock Setting and press [Enter]. e Select one of these lock types and press [Enter]: • To lock all of the projector's buttons, select Full Lock. • To lock all buttons except the power button, select Partial Lock. You see a confirmation prompt. f Select Yes and press [Enter].

The control panel buttons are locked using the setting you chose. g Related Links • "Unlocking the Projector's Buttons" p.79 Unlocking the Projector's Buttons If the projector's buttons have been locked, do one of the following to unlock them. • Hold down the [Enter] button on the control panel for 7 seconds. A message is displayed and the lock is released. 80 Projector Security Features • Select Off as the Control Panel Lock setting in the projector's Settings menu. s Settings > Lock Setting > Control Panel Lock g Related Links • "Projector Feature Settings - Settings Menu" p.105 Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington Microsaver Security system. For more details on the Microsaver Security System, see kensington.com/. a • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture. You can use a commercially available theft-prevention wire lock. See the documentation supplied with the wire lock for locking a instructions.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply