FREE ENGLISH ELKAY LKQS35 (01) PDF USER GUIDE
FREE ENGLISH ELKAY LKQS35 (01) PDF USER MANUAL
FREE ENGLISH ELKAY LKQS35 (01) PDF OWNER GUIDE
FREE ENGLISH ELKAY LKQS35 (01) PDF OWNER MANUAL
FREE ENGLISH ELKAY LKQS35 (01) PDF REFERENCE GUIDE
FREE ENGLISH ELKAY LKQS35 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ELKAY LKQS35 (01) PDF REFERENCE MANUAL
FREE ENGLISH ELKAY LKQS35 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ELKAY LKQS35 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ELKAY LKQS35 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ELKAY LKQS35 (01) PDF SUMMARY:
What should I ensure about the disposer before I start the installation?
Make sure the disposer is installed properly to the sink and the clamp is secured.
What should I do to the metal collar before I start the installation?
Clean the inside of the metal collar supplied with the garbage disposer.
What should I apply under the rim of the strainer flange?
Apply a small amount of neutral cure silicone caulk / adhesive under the rim of the strainer flange.
How do I align the drain body and strainer flange?
Line up the ribs in the drain body and strainer flange.
What do I do after aligning the drain body and strainer flange?
Screw in the ferrule.
How tight should I screw in the ferrule?
Hand tighten then 1/4 turn with a small screw driver. Do not over tighten.
What do I do with any excess caulk or adhesive?
Remove excess caulk / adhesive.
What size flange is this product designed for?
This product is designed for garbage disposals that accommodate a 3-1/2" (89mm) diameter flange.
What type of disposer mounting collar can this product be used with?
This product can be used with any disposer with an InSinkErator quick lock mounting collar except the InSinkErator Evolution line.
Which brands is this product NOT intended for?
This product is not intended for the following brands: GE, Sinkmaster, Whirlaway models with the EZ mount flange.
Is this product intended for batch feed garbage disposals?
No, this product is not intended to fit batch feed garbage disposals.
What should I do to the flange gasket before I push it into the metal collar?
Lubricate the flange gasket with water.
How should I insert the flange into the metal collar?
Push the flange slowly into the metal collar. Press firmly until in place.
What should I do to the gasket on the strainer before pushing it into the flange?
Lubricate the gasket on the strainer with water.
How should I place the strainer in the flange?
Push the strainer slowly into the flange.
How do I position the drain body on the sink bottom?
Lubricate flange gasket with water, place into lip of drain body and position drain body on the sink bottom.
How do I secure the strainer into the drain body?
Push the strainer into the ferrule in the drain body.
What should I make sure of before tightening the drain body nut?
Make sure the washer is in position.
How do I tighten the drain body nut?
Slide nut on 1 1/2” drain tubing and hand tighten the drain body nut.
What is the next step after tightening the drain body nut?
Test for leaks.
What is the warranty period for the drains?
Drains are warranted to be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
What does the warranty not cover?
The warranty does not cover product failure or damage caused by abusive treatment, misuse, environmental factors, or improper care and cleaning.
What is required to make a warranty claim?
Proof of purchase including date of purchase is required.
CLICK HERE TO DOWNLOAD ELKAY LKQS35 (01) PDF MANUAL