ELINCHROM ELC 500 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD ELINCHROM ELC 500 (01) PDF MANUAL


PDF Content Summary: ERROR MANAGEMENT ELC CONNECTION http://www.elinchrom.ch/support number Error Desription Solution 1 Capacitor overvoltage 4 Charge timeout Switch the unit off, wait 6 Voltage unstable (Charge hold error) 2 minutes and switch the unit on again. If the error shows up again the unit 18 Discharge circuit error requires a check-up at an authorized Elinchrom Service Centre. ELC 125 / 500 32 Head board type unknown 33 14 VDC error Unit Quick Start Guide Sync socket USB socket for firmware update Power supply http://www.elinchrom.com Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND QSG ELC 125 / 500 - 08.2019 Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland, Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: elinchrom@elinchrom.ch CONTROL SETUP MENU PANEL Mode Off Normal Speed 1. Menu selected 2 Radio Group 1-4 2. Selected menu options Frequency 1-20 3. Menu option settings navigation 4. Exit menu navigation 5. Back Flash mode Knob Button : Scroll function to change setting / press function to enter the menu option. Knob Button Long press to enter the menu. Press menu for Mode, VFC, Timer. 13 Flash mode Standard Action Recycling time Fast Eco Flash before ready Yes No Photocell Mode On Off 5 4 Extras Photocell Auto stand-by Off 1-59 min. Auto-off Off 1-60 min. Auto-on Yes No Favorite function Flash Skyport mode, Group, Recycling Photocell time, Mode, Flash Background before ready, Logo mode Low, High, Off, Low on ready, High on ready Logo color Group color White Ready tone 1-12 Ready volume Off, Min, Low, Default, High, Max Error volume Off, Min, Low, Default, High, Max Keyboard click Off, Min, Low, Default, High, Max Background Black White Info On / Off MODELLING LAMP BUTTON -1 f-stop / back Friendly name “ELC XXX -1” 125 by / 500 default depending (set through on the computer), model XXX = Firmware rev. ******* Skyport ID ******* Life time In hours (hhhh:mm) Power-on count How many times the units has been turned on Flash count Total flash number Favorite +1 f-stop / exit function Knob Button CW: +0.1 f-stop / down CCW: -0.1 f-stop / up DISPLAY PANEL – DASHBOARD The colours of the upper bar correspond to the group number : blue for the group 1, yellow for the group 2, red for the group 3 and green for the group 4. 1. EL-Skyport Synchronisation (normal or speed sync mode) 2. EL-Skyport frequency channel and group number 3. Photocell status 4. Flash mode Action 5. Volume 10 6. Recycling time 7. Power setting in f-stop equivalents 8. Increase by 1 f-stop 9. Decrease by 1 f-stop 10. Flash Duration value 1 2 3 4 65 8 9 7


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply