PDF Content Summary:
****** Page 1 ****** @ element 43″ FHD Digital LED TX/ INSTRUCTION MANUAL ELST4316S Please read all the instructions carefully before using this TV, and keep the manual for future reference.
****** Page 3 ****** O CONTENTS Important Safety Instructions Additional Safety Information Preparations What’s Included Front/Side View Rear View Wall Mounting Remote Control Connecting External Devices Customizing TV Settings Turning On/Off Your TV Setup Wizard Navigating The On-screen Display Streaming Media Viewing Photos Listening To Music Selecting The Input Source Channel Selection Volume Adjustrent Setup Settings Audio Settings Picture Settings Channel Settings Time Settings Network Settings Lock Settings Parental Control Troubleshooting FCC Notes Specifications OTT APP Service 2 3 4 8 9 25 28 28 29 1
****** Page 4 ****** O IMPORTANT SAFETY INSTRUCTIONS • Read these instructions — All the safety and operating instructions should be read before this product is operated. • Keep these instructions — The safety and operating instructions should be retained for future reference. • Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions — All operating and use instructions should be followed. • Do not use this apparatus near water — The appliance should not be used near water or moisture — for example, in a wet basement or near a swimming pool, and the like. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has tN0 blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. 2 • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Please keep the unit in a well-ventilated environment. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. CAUTION OF SHOCK aa “Ot OPEN RISQUE OE CHCC ELECTRIQUE NE AVIS PAS OUVRIR This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. ENERGY STAR This product meets ENERGY STARS guidelines for energy efficiency. ENERGY STARS and the ENERGY STARS mark are registered U.S. marks ENERGY STARS is a registered mark owned by the U.S government.
****** Page 5 ****** O ADDITIONAL SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical Safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on them, which may damage the leads. Hold the main plug, not the wires, when removing from a socket. • During a thunderstorm, or when not using the television for extended period of time, turn off the power switch on the back of the television. Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. • Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally. Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Qualified personnel must only service this apparatus. • To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for long period. Do not break open or throw exhausted batteries on a fire. Do not mix old and new batteries. Do not mix Alkaline,Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. Physical Safety Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2″) clearance all around. Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control. To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs. Unplug the apparatus during lightning storms or when unused for long periods. • Refer all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped. • Please always connect your television to a power outlet with protective ground connection. 3
****** Page 6 ****** PREPARATIONS What is Included? TV Set @ element 43″ FHO Digital LED TV INSTRUCTION MANUAL Please rea 311 tne Inst-uc.ttor* caretL’lIY etre LEIng tms TV, ant tne manual tr tuture retereræ. User Manual 0K @element Remote Control with Batteries Quick Start Guide o eat* Quick Start Guide Warranty Card
****** Page 7 ****** O PREPARATIONS Front/Side View Switch the TV between On / Standby mode. • SOURCE Press to select among different input signal sources. • MENU Display the OSD (on screen display) menu. Press to select a channel. VOL +1- Press to adjust the volume. LED The LED light indicates when the TV is activated. Infrared Receiver. • LED 5
****** Page 8 ****** O PREPARATIONS Rear View .1 1 C) USB 5V=500mA LAN HDMI 2 HDMI 1 VGA 1.Headphone output Connect to the Headphones. 2.USB Input Connect to a USB storage device to play photo files. (USB mode) 3. LAN Network connection port. 4. HDMI Inputs Connect to a High-Definition (HD) signal Input device. 5. VGA Input Connect to a computer or other devices with a VGA interface. Wall Mounting PC AUDIO (750) 6. PC Audio Input Connect to a computer audio output. 7. Antenna Input (750 VHF/UHF) Connect to the antenna (750 VHF/UHF) socket with the RF coaxial cable. 8. Optical Output Connect a digital sound system to this jack. 9. COMPONENT/AV Input Connect to AV devices with composite/ component (Y/Pb/Pr) video and audio output sockets. COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R). The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied). Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4 pcs isometric threaded screws (Not Supplied). i 6 Your new TV is heavy, please consult with professional wallmount installer to perform this installation.
****** Page 9 ****** o PREPARATIONS Remote Control POWER ceco 9 Tube TO O h Goggles NETFLIX 0K 13 14 17 1 I CH.LIST P’MOOE V-CHIP II HDM S.MOOE MTS 16 32 36 @ element 1. the n/ between On and Standby mode. 2. N:Mute and restore n/ sound. 3. a program. (ATV/DT/ mode) 4. —:Enter multiple program channel number such as 2-1 . 5. C’: Return to the previous viewing channel. 6. APP:Press to select the desired APR 7. MENU:Display the main menu. 8. SOURCE:Select among the different input signal sources:W/AV/COMPONENT/HDM11/ HDM12/HDM13/VGA. A V you to navigate the on screen display menus and adjust the system settings to your preference. 10. 0K:Confirm the selection. 11. RETURN:Return to previous menu. 12. EXIT.Exit the on screen display menu. 13. USB:Access into the USB directly. 14. the volume. 15. CH+:Select the channel. 16. REPEAT.Press repeatedly to select the repeat mode. 17. *Stop the playback. 18. to the beginning of the previous chapter/track/photo. 19. »:Skip to the beginning of the next chapter/ track/photo. 20. «:Reverse playback rapidly. 21. »:Advance playback rapidly. 22. FREEZE:Freeze the picture. 23. l:Start playback or pause. 24. ADDIERASE:Add or delete Favorite channels. 25. FAV:Display the favorite channel list. 26. INFO:Display the present screen information such as the current channel and input source. 27. S.MODE:Select sound mode:standard/music/ movie/user 28. P.MODE:Select picture mode:dynamic/movie/ energy saving/user/standard. 29. CH.LlST.Display program list. 30. up parental control. 31. ASPECTSelect the aspect ratio. settings:standard/wide/wide zoom/zoom/Just Scan (HDMI). 32. CC:Closed Caption selection:OWOFF/CC On Mute. 33. MTS:Switch among different audio channels:STEREO/MONO/SAP. 34. AUTO:Press to adjust the picture automatically in VGA source. 35. SLEEP:Set the TVsleep timer: OFF/5/10…/180 / 240 min. 36. N:Press to turn to TN/ mode. 37. HDMI:Access into the HDMI directly. 38. VGA:Access into the VGA directly. 7
****** Page 10 ****** 0 CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite OR VCR Video Camera Antenna Cable Satellite Receiver Composite/Component Cable (not included) Audio Cable (not included) Digital Audio System Optical Cable (not included) RF Cable(not included) USB Cable LAN HDMI 2 HDMI 1 VGA PC AUDIO (750) (not included) Network Cable (not included) Headphones WIFI Router 8 VGACåle (rx* mtRH) Computer HDMI Cable(not included) HDMI Device
****** Page 11 ****** 0 CUSTOMIZING TV SETTINGS Turning On/Off Your TV • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the Q) button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket. Setup Wizard • The first time you turn the TV on; it will go into the Setup Wizard. Press the A/ ‘buttons to select your desired mode and press 0K button to confirm. •za Choose your Picture Mode Home Mode optimizes the standard video settings for ENERGY STARD qualification Home Mode(Energy Saving) Retail Mode O Select Exit MENU Home Mode (Energy Saving) is the default as-shipped television configuration and settings. And Home Mode (Energy Saving) is the setting in which the product qualifies for ENERGY STARB. Any changes to default as-shipped television configuration and settings would changethe energy consumption. And enabling certain optional features and functionalities may increase energy consumption beyond the limits required for ENERGY STARB qualification, as applicable. Retail Mode:Select Retail Mode if you would like your picture to be brighter.At times this mode may use more energy to operate the Volume/Sound mode and the Picture Mode. In this setting, the power consumption may possibly exceed the limited requirement of the ENERGY STAR@qualification. ENERGY STARDis a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and pratices. The On-MODE Power under Home Mode should be less than 39 W. The SLEEP-MODE Power should be less than 0.5 W. 9
****** Page 12 ****** O CUSTOMIZING TV SETTINGS Setup Wizard • Press Yes to confirm. Note: If you want change the modes between Home Mode(Energy Saving) and Retail Mode, you can change the setting in the Setup Menu under Display Mode. • Press theA/Vbuttons to select your desired mode and press 0K button to confirm. • Press the < / A/ v buttons to select your desired mode and press 0K Setu Wizard Are you sure you want Home Mode(Energy saving)? In this mode ENERGY STARO saving are realized Yes No O :Select : Return MENU Setu Wizard Click here to set network Lan or Wireless. Click here to connect a other player. Click here to scan channels from the Antenna or coaxiöl cable hputw 0 9 :Move :Return MENU Setu Wizard button to confirm. Menu Language Air/Cable Cable Auto Scan 10 Menu Language Air/Cable Cable Auto Scan O O : Move O :Select English Air Auto • Return MENU Select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Select antenna between Air and Cable. Select Cable system: Auto, STD, IRC, HRC. Search and store the available channels automaticall ****** Page 13 ****** 0 CUSTOMIZING TV SETTINGS Navigating The On-screen Display • Press the MENU button to display the main menu. Press the A/ Y buttons to navigate and select the available menus. SETTINGS Lmnguage Transparency Zoom Mode Recuction Closed Caption Restore oetaut't English Wide Middle AUOIO So•und Mod' Treble aaunce Surround Auto Volume Auto Wtqua,qe 5tancard English OOSele Sleep Timer Zone Pocific 11 ****** Page 14 ****** 0 CUSTOMIZING TV SETTINGS Streaming @ element STREAMING MEDIA SOURCE SETUP NETFLIX Network Status: Unconnected • Press the MENU button on the main unit or on the remote control to display the STREAMING. Then press buttons to select the desired APP and press 0K button to view what you want. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toongoggles Pandora AccuWeather 12 Enjoys TV shows & movies streamed instantly over the Internet. YouTube your way on the best screen in your house. Discover, watch and collect the latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments. A subscription video on-demand platform that offers animated, fun and educational cartoons, engaging games and songs from all over the world and in many different languages to children. Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. It’s easy to create personalized stations that play only music you’ll love. Displays the current weather conditions and the temperature anywhere in the world in centigrade or Fahrenheit.
****** Page 15 ****** 0 CUSTOMIZING TV SETTINGS Media @ element STREAMING MEDIA SOURCE SETUP Network Status; Unconnected NOTE:Portab/e storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control and then press A/ V buttons to select the MEDIA, and then press 0K button to enter. Viewing Photos MEDIA MEDIA MEDIA oooooöooeeoeo • After entering MEDIA, press < / buttons to select PHOTOS and then select the disk type to enter. Then use A/ v / 4/ buttons to navigate in the picture folder and then press 0K button enter. Note: File format supported: JPEG. 13 ****** Page 16 ****** O CUSTOMIZING TV SETTINGS Listening To Music • After entering MEDIA, press buttons to select MUSIC and then select the disk type to enter. Then use A/ v / buttons to navigate in the music folder and then press 0K button enter. Note: File format supported: MP3. Davic:c Found I aaa 01 MEDIA MEDIA o MEDIA MEDIA o 14
****** Page 17 ****** O CUSTOMIZING TV SETTINGS Selecting The Input Source @ element STREAMING MEDIA SETUP Network Status: Unconnected • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. • P ress th buttons to select your desired input source among: TV/AV/ Component/HDMl 1/HDM12/HDM13/VGA and then press 0K button to confirm. Channel Selection • Press the CHA/CHV buttons on the main unit or on the remote control repeatedly to select the channel. • Press the 0-9 buttons on the remote control to select the channel directly. Press “4”, and then press 0K button to select channel 4. Press “4” and “5”, and then press 0K button to select channel 45. Press “2” and “3”, and then press 0K button to select channel 123. Volume Adjustment • Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume. • If you wish to switch the sound off, press the* MUTE button again or the VOL+ button to resume the sound. 15
****** Page 18 ****** O CUSTOMIZING TV SETTINGS Setup @ element STREAMING SOURCE SETUP • Press the MENU button on the main unit or on the remote control to display the main interface. Then press A/ v buttons to select SETUP menu and press < / button to select the desired option. Settings • Press buttons to select SETTINGS menu and then press 0K button to enter. Press A/ V buttons to select the following setting options and then press buttons to adjust each Menu Language Transparency Zoom Mode Noise Reduction Advanced Closed Caption SETTINGS Restore Default 00 Move 00 select English Off Wide Middle Off Return option’s setting. Menu Language Transparency Zoom Mode Noise Reduction 16 Select menu language : English, French or Spanish. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode : Wide/Wide Zoom/Zoom/Standard/ Just Scan(HDMl). Note: Different input source, the zoom mode options may differ. Reduce the noise level of the connected device: Off/ Weak/Middle/Strong.
****** Page 19 ****** o CUSTOMIZING TV SETTINGS Advanced Closed Caption DLC Restore Default Audio Settings Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto. (VGA source mode only) CC Mode Basic Selection Advanced Selection Option Select CC mode : On, Off or CC on Mute. Basic Selection: CCI, CC2, CC3, CC4, Textl, Text2, Text3, Text4. Advanced Selection: Servicel, Service2, Service3, Service4, Service5, and Service6. Options: Mode, Font, Size, Edge Effect, Edge Color, Text Color, Background Color, Text Opacity, Background Opacity. Select to turn On/Off the dynamic luminance control. Restore the TV to factory default settings. • Press the MENU button on the main unit or on the remote control then press the A/ Y buttons to select AUDIO menu and then press the or the 0K button to enter. • Press the A/ V buttons to select the following audio options and then press the buttons to adjust each CHANNEL AirfCable Auto Scan Favorite Show/Hide Channel Name o Label Signal Information Move Cable Select option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel Name Label Signal Information Time Settings Return Select antenna between Air and Cable. First, select your cable system from Auto/STD/lRC/HRC. Next, select the Auto Scan feature to scan your available cable channels. It will perform the auto scan if the Air antenna is selected. Set the selected channel as favorite channels. Show/Hide the selected channel. Display the current channel name. Display the current channel label. Display the information of current signal. • Press the MENU button on the main unit or on the remote control then press the A/ v buttons to select TIME menu and then press the or the 0K button to enter. • Press the A/ v buttons to select the following time options and then press the button to adjust each Sleep Timer Time Zone Day@ht Saving Time TIME O eMove sele Pacific option’s setting. Sleep Timer Time Zone Daylight Savin Time Return Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…1180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directl Select a Time Zone: Hawaii/ Alaska/ Pacific/ Mountain/ Central/ Eastern/ Atlantic/ Newfoundland. Select to turn On/Off daylight saving time. 19
****** Page 22 ****** O CUSTOMIZING TV SETTINGS Network Settings • Press buttons to select NETWORK menu and then press 0K button to enter. • Press A/ V buttons to select the following network options and then press buttons to adjust each Network TVpe Wireless IP Address Deactivate Netflix Deactivate Vudu ESN Lan 8 NETWORK option’s setting. Network Type Lan Wireless IP Address Deactivate Netfli Deactivate Vudu ESN Auto Upgrade O e Move Select Return Select two types of network: Wireless or Lan. Connect the TV to the wired Lan: Auto Get IP/Manual Get IP Connect the TV to the wireless network through searching the available Wifi. Display the current IP information. Deactivate Netflix and clear the account information. Deactivate Vudu and clear the account information. Electronic Serial Number • After the TV connects to network, the system will automatically detect software version. Upgrade software is downloading,complete 66% and need about 1 minute yet,please try later… 20
****** Page 23 ****** O CUSTOMIZING TV SETTINGS • If there is a new version, it will be downloaded in the background. When you want to enter the app, a menu bar will pop up reminding you that upgrade software is downloading. Please try later… Network Upgrade System has a new version software,and will enter upgrade mode, please don’t cut off the power.About one minute later, It will update automatically.. • After the download completed, it can upgrade automatically after users press the standby button. Note: This procedure is fully automatic, and remember not to cut off the power. Reminder for internet connection: • Below occasions are possible while your internet is connected to enjoy your OTT services. • 1 -Please check your internet signal strength while internet is connected, signal strength below 50 may result bad connection and non-smooth picture. • 2. To enter OTT services, 30 second may be required for internet connection. Recommended 10Mb above internet speed 21
****** Page 24 ****** O CUSTOMIZING TV SETTINGS Lock Settings • Press the MENU button on the main unit or on the remote control and then press the A/ V buttons to select LOCK menu. • Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press the A/ V buttons to select the following options and then press the buttons to adjust each option’s setting. The default password is “0000”. Change Password System Lock USA Cana dB RRT Setting Reset RRT Clear Lock Move Select Off LOCK Return Use 0-9 buttons to input the old password and then Change Password input the new 4-digit password. Re-enter new password System Lock USA Canada RRT Setting Reset RRT Clear Lock 22 for confirmation. Select to turn On/Off system lock. The following options (USA, Canada, RRT Setting and Reset RRT) will only be accessible when you turn the system lock on. TV MPAA Canada English Canada French TV RATING: Press 0K button to lock or unlock TV rating. Select MPAA rating : N/A,G, PG, PG-13, R, NC-17,or X. Select MPAA rating for English-speaking Canada : E, C, C8+, G, PG, 14+, 18+. Select MPAA rating for Quebec Canada : E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. Set Rating Region Table. Select to reset the RRT setting. Clear all lock settings.
****** Page 25 ****** 0 CUSTOMIZING TV SETTINGS Parental Control Press the MENU button on the main unit or on the remote control and then press the A/ V buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and children blocks should be both programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture Industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children. Overview To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus examples below. Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-MA rated programming.) Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/Vldeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control. Do not forget the password, it is the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.Do you want the Parental Control to be active at all times? If not, you can turn it on or off with the Lock On/Off option. • You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time. • Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources. • Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources. • You can not disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time setting specified if power is disconnected. 23
****** Page 26 ****** O CUSTOMIZING TV SETTINGS Motion Picture Association of America (MPAA) Rating System PG-13 NC-17 x No Rating Grade General Audiences Parental Guidance Suggested Parents Strongly Cautioned Restricted No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program. Not for children under 17, strong element of sex and/or violence. Not for children under 17 under any circumstances. Strong sexual content. Same as NC-17 rating. MPAA Not Rated TV Parental Guideline Rating System TV-Y TV-Y? TV-G TV-PG TV-14 TV-MA Canadian Rating: Grade All Children Directed to Older Children General Audience Parental Guidance Suggested Parents Strongly Cautioned Mature Audience only Meaning Content not offensive to most viewers. Considered suitable for children over 7, may contain fantasy violence scenes. Considered suitable for all audience; children may watch unattended. Suggested unsuitable for younger children, may contain suggestive language, bad language, sex and violence scenes. unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes. Adults only, may contain strong language, bad language, sex and violence scenes. • Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG, 14+, 18+). • Canadian French is used in Quebec (G,8 ans+, 13 ans+, 16 ans+, 18 ans+). The V-Chip will automatically block certain categories that are “more restrictive”.lf you block TV-Y category,then TV-Y 7 will be automatically blocked. Similarly,if you block TV-G category, then allthe categories in the “young adult” will be blocked (TV-G, TV-PG,TV-14,and TV-MA). 24
****** Page 27 ****** o TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support (Refer to Warraty page). SYMPTOM Dead. No LED lit Dead. No LED lit red Blue screen POSSIBLE CAUSE No power to the TV. Set in standby mode. No signal. Incorrect source selected. Noisy, snowy, ghosting Poor antenna signal. picture (TV) Sound “Mute”. Volume set too low. No sound External leads not connected “if used”. REMEDY • Check all connections to the TV’s AC socket. • Press either the Power button or the Standby button on the remote control. • Press the SOURCE button to select the correct source. • If using an indoor antenna, try adjusting the antenna position. Check antenna connections. Turn sound “Mute” off. • Check volume settings. • Check that all external leads are connected properly. 25
****** Page 28 ****** 0 TROUBLESHOOTING Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM No sound and picture Red LED indicator lights Normal picture but no sound The remote control does not work Power suddenly turns off Picture appears slowly after switching on Poor color or picture Horizontal/vertical bars or • picture shaking Blue screen Poor reception on some channels Lines or streaks in pictures No output from one of the speakers 26 POSSIBLE SOLUTIONS • Check that the main plug has been connected to a wall outlet. • Check that you have pressed the POWER on the front of the TV set. • Check the picture contrast and the brightness setting. Set in standby mode. Press either the Power button or the Standby button on the remote control. • Check the volume. Sound muted? Press the MUTE button. • Try another channel, the problem may be with the broadcast. • Are the audio cables installed properly? • Check to see if there are any objects between the TV and remote control causing obstruction. • Are batteries installed with correct polarity (+/-)? Correct remote operating mode set: TV, VCR, etc? Install new batteries. Is the sleep timer set? • Check the power connection, power may be interrupted. • No broadcast on the station tuned. • This is normal, the image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes. Adjust the color in Menu option. Keep a sufficient distance between the product and the VCR. • Try another channel, the problem may be with the broadcast. • Are the VIDEO cables installed properly? • Activate any function to restore the brightness of the picture. Check for local interference, such as an electrical appliance or power tool. • Press the SOURCE button to select correct source. • Station or cable experiencing problems. Tune to another station. • Station signal is weak, reorient antenna for better reception. • Check for sources of possible interference. • Check the antenna (change the direction of the antenna). Adjust balance in the Menu option.
****** Page 29 ****** O TROUBLESHOOTING Note: When there is a problem in VGA mode ( only when VGA mode is applied). PROBLEM The signal is out of range Vertical bar or strip on the background, horizontal noise and incorrect position Screen color is unstable or is a single color Maintenance POSSIBLE SOLUTIONS Adjust resolution, horizontal or vertical frequency. Check whether the signal cable is connected or loose. Check the input source. • Set the auto configure or adjust clock, phase, or HIV position. Check the signal cable. Reinstall the PC video card. Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. Storage temperatures are 320 to 1220F(00 to 500C). Working temperatures are 320 to 950F(00 to 350C). Do not place your TV in direct sunlight or near a heat source. Clean the screen A great tip to dust off your screen: wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the screen. Make sure the excess water is off the screen, then let air-dry before you turn on the TV. Cleaning the cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, line-free cloth. Please be sure not to use a wet cloth.
****** Page 30 ****** o FCC NOTES FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 )This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/T/ technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm betMeen the radiator & your body For customer support: 1-888-338-5666 Please send all correspondence to: Element TV Company, LP. Customer Service 15930 valley Blvd., City of Industry, CA 91744 email@example.com SPECIFICATIONS Panel Size Display Type Panel Technology Panel 60 Hz vs. 120 Hz Display Resolution HDMI & Component Support Panel Resolution Aspect Ratio Contrast Ratio-Panel Brightness (Centre Typ.) Cd/M2 Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR210) Vertical Viewing Angle (At CR210) TV System Channel Range 43 inches diagonally LED TFT 60 Hz Up to 1080P 1080? 1920 x 1080 16:9 2400-3000:1 180 8 ms 30,000 hours 178 178 ATSC/NTSC Design and specifications are subjects to change without prior notice. 28
****** Page 31 ****** o OTT APP SERVICE OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. Netflix NETFLIX You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https:[kontactus.netflix.com/help for alternative contact information. . YouTube You Tube You can browse the following website for more help: productforums.gooale.com/forum/#!cateaories/youtube/smart-tvs • VUDU – MOVIES & TV – VUDU You can call the following telephone for more help: 888-554-8838 You can call the following telephone for more help: 888-874-5411 . Pandora You can send E-mail to Pandora for more help: firstname.lastname@example.org • AccuWeather AccuWeather You can send E-mail to AccuWeather for more help: CustomerService@AccuWeather.com 29
****** Page 32 ****** This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL