PDF Content Summary:


****** Page 1 ****** electro-barmonix NEO MISTRESS Compact Flanger Congratulations on your purchase of the Electro-Harmonix NEO MISTRESS! The NEO MISTRESS is a compact, battery operated Flanger effects pedal with Filter Matrix mode. Though simple to use, a plethora of different sounds are available from the Neo Mistress’ two knobs: RATE and FEEDBACK. Each knob sweeps through a wide range of functionality; please read the description below for each knob to obtain a complete understanding of their abilities. The Neo Mistress is true bypass. – CONTROLS – RATE KNOB — controls the speed or rate of the LFO signal that modulates the Flanger. As you turn the RATE knob up, or clockwise, the speed of the effect will increase. When the RATE knob is turned down below the 11 o’clock position (marked by a star near the knob), the Neo Mistress enters Filter Matrix mode. In Filter Matrix mode the LFO is disconnected from the Flanger so that the Flanger is no longer modulated by the Neo Mistress’ internal modulation. Turning the RATE knob from full counter-clockwise to the star symbol allows manual modulation of the Flanger’s position. You can also fix the Flanger to one setting and, working in conjunction with the FEEDBACK knob, achieve resonant bell tones, steel drum effects and other unique sounds. Turn the RATE knob above the 11 0’clock position (marked by the star) to exit Filter Matrix Mode and return to LFO modulation. FEEDBACK KNOB — controls the “color” or “resonance” of the Flanger effect. As the knob is turned up, the “depth” or “width” of the LFO is also increased to make the effect even more pronounced. Above the 3 0’clock position, the FEEDBACK knob pushes the Flanger very close to self- oscillation, creating additional harmonics as it sweeps through the effect’s range. FOOTSWITCH and STATUS LED — Use the footswitch to toggle between bypass and effect modes. The Status LED will be off while in True Bypass mode. The LED lights up upon engaging Effect mode with the footswitch. In Effect mode, the LED’s color changes with the position of the Flanger: in the bass range of the Flanger’s sweep, the LED is red; the LED is green in the treble range of the sweep; in between, the LED is orange.

****** Page 2 ****** INPUT JACK Connect the output of your instrument or another effects pedal to this jack. The input impedance presented at the INPUT jack is 1 AMP JACK Connect the AMP jack to your amplifier input or the input of another effects pedal. The output impedance at this jack is 11500. 9V Power Jack — The NEO MISTRESS can run off of a 9V battery or you can connect a 9VDC battery eliminator capable of delivering at least 100mA to the 9V power jack. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss@ & Ibanez@) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative plug. The battery may be left in or taken out when using a power supply. The current draw for the NEO MISTRESS is 30mA.

****** Page 3 ****** – WARRANTY INFORMATION Please register online at ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term. If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date. United States & Canada EHX CUSTOMER SERVICE ELECTRO-HARMONIX c/o NEW SENSOR CORP. 47-50 33RD STREET LONG ISLAND CITY, NY 11101 Tel: 718-937-8300 Email: info@ehx.com Europe JOHN WILLIAMS ELECTRO-HARMONIX UK 13 CWMDONKIN TERRACE SWANSEA SA2 ORQ UNITED KINGDOM Tel: +44 179 247 3258 Email: electroharmonixuk@virginmedia.com This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased. To hear demos on all EHX pedals visit us on the web at ehx.com Email us at info@ehx.com

****** Page 4 ****** – FCC COMPLIANCE – This device comp/ies with part 15 of the FCC Rules. Operation is subject to the fo//owing two conditions: (1) This device may not cause harmfu/ interference, and (2) this device must accept any interference received, including interference that may cause undesired operation If the device is not insta//ed and used in accordance with the instructions, it may cause harmful interference to radio communications and void the user’s authority to guarantee the equipment. Note: This equipment has been tested and found to comp/y with the /imits for a C/ass B digita/ device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmfu/ interference in a residentia/ insta//ation. This equipment generates, uses and can radiate radio frequency energy and, if not insta//ed and used in accordance with the instructions, may cause harmfu/ interference to radio communications, However, there is no guarantee that interference wi// not occur in a particular insta//ation, If this equipment does cause harmfu/ interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fo//owing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not express/y approved by the manufacturer could void the useHs authority to operate the equipment under FCC ru/es,








Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to top