Click here to download ELATION PROFESSIONAL ELED QW (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** ELED QW strip Introduction Atmo PROFESSIONAL ELED QW strip User Instructions 12/12 Unpacking: Thank you for purchasing the ELED QW Strip by Ela- tion Professional@. Every ELED QW Strip has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during ship- ping. If the carton appears to be damaged, carefully inspect your fix- ture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or parts are missing, please contact our customer support number for further instructions. Do not return this unit to your dealer without first contact- ing customer support. Introduction: The ELED QW Strip is part of Elation Professionals@ continuing pursuit for creating high quality affordable intelligent fix- tures. The ELED QW Strip is a powerful DMX intelligent 4-in-l RGBW (Red, Green, Blue, & White) LED strip. This unit can has 4 operating modes; Macro mode, Program mode, RGBW mode, and DMX con- trolled. This unit can be used as a single, stand alone unit or used in a master-slave configuration. Customer Support: provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at elationlighting.com for any comments or sugges- tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time. Voice: Fax: E-mail: (323) 582-3322 (323) 832-9142 support@elationlighting.com Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures war- ranty. In the unlikely event your unit may require service please contact @Elation customer support. PLEASE recycle the shipping carton when ever possible. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 2

****** Page 2 ****** ELED QW strip General Instructions ELED QW strip Safety Precautions To optimize the performance of this product, please read these operat- ing instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. ELED QW strip Multi-Colors Built in Microphone Four Operating Modes 68 Color Macros DMX-512 protocol Features 9 DMX Modes: 1 Channel Mode, 2 Channel Mode, 4 Channel Mode, 5 Channel Mode, 7 Channel Mode, 8 Channel Mode, 36 Channel Mode, 54 Channel Mode, & 72 Channel Mode. Pixel Direction Control: The direction in which the pixels light up can be reversed so that the pixels can light up at either end of the bar. This feature is used with 36 DMX Channel mode, 54 DMX Channel mode, and 72 DMX Channel mode. This feature is also used with some built-in programs under Program Mode. ELED QW strip Warranty Registration The ELED QW Strip carries a two year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our customer support number. All pack- ages returned to the service department not displaying a R.A. number on the outside of the package will be returned to the shipper. • To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture • Do not spill water or other liquids into or on to your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short. • Disconnect from main power before making any type of connection. • Do not remove the cover under any conditions. There are no user serviceable parts inside. • Never operate this unit when it’s cover is removed. • Never plug this unit in to a dimmer pack • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6″ (15cm) between this device and a wall. • Do not attempt to operate this unit, if it becomes damaged. • This unit is intended for indoor use only, use of this product out’ doors voids all warranties. • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in safe and stable matter. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit. • Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 19 for cleaning details. • Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (inclu- ding amplifiers) that produce heat. • The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the appliance. C. The appliance has been exposed to rain or water. D. The appliance does not appear to operate normally or exhibits a marked change in performance. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 3 Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 4

****** Page 3 ****** ELED QW strip Set Up ELED QW strip Set Up Power Supply: The Elation ELED QW Strip contains an automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. DMX-512: DMX is short for Digital Multiplex. This is a universal pro- tocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fix- ture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal). DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compli- ant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. Data Cable (DMX Cable) Requirements (For DMX Operation): The ELED QW strip has 9 DMX Channel Modes. The DMX address is set electronically using the controls on the rear panel of the unit. Your unit and your DMX controller require a approved DMX-512 110 Ohm Data cable for data input and data output. We recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use stan- dard 110-120 Ohm shielded cable (This cable may be purchased at almost all professional sound and lighting stores). Your cables should be made with a male and female XLR connector on either end of the cable. Also remember that DMX cable must be daisy chained and cannot be split. Figure 1 Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con- nected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior. ot 3 2 Termination reduces signal errors and avoids signal transmission problems and interference. It is always advisable to connect a DMX terminal, (Resistance 120 Ohm 1/4 W) between PIN 2 (DMX-) and PIN 3 (DMX +) of the last fixture. 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversion. 3-Pin XLR to 5-Pin XLR Conversion Conductor Ground/Shield Data Compliment (- signal) Data True (+ signal) Not Used Not Used 3-Pin XLR Female (Out) 5-Pin XLR Male (In) Pin 1 Pin 2 Pin 3 Pin 1 Pin 2 Pin 3 Do Not Use Do Not Use Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 5 Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 6

****** Page 4 ****** ELED QW strip LED Display Backlight On/Off: Operating Instructions ELED QW strip Operating Instructions To set the LED display to turn off after 10 seconds, press the MODE button until “Disperm BackLight” is displayed. Either “On” or “Off” will be displayed. Press the UP or DOWN button so that “Off” is displayed, the display will now turn off after 10secs. Press any button for at least 5secs. to turn the display on again. Be advised though that the display will turn off automatically after 10 seconds of inactivity. To make the backlight display stay on at all times, press the UP of DOWN button so that “On” is displayed. Operating Modes: You can use the ELED QW Strip in four ways: • Macro Mode – There are 68 color macros to choose from. • Program Mode – There are 15 built in programs and sound active mode to choose from. • RGBW mode – Control the intensity of all four colors adjusting the intensity to your desire. • DMX control mode This function will allow you to control each individual fixtures traits with a standard DMX 512 controller such as as the Elation@ Show DesignerTM. Macro Mode: 1. Plug the fixture in and press the MODE button until “Color Macro” is displayed. 2. There are 68 macros to choose from. Select your desired macro by pressing the UP and DOWN buttons. Fade Program: This mode is used in conjunction with the RGBW mode. 1. To run a fade program first create your desired color in RGBW mode. After you have created your color press the MODE button until “Program Fade Speed” is displayed. 2. Press the UP or DOWN buttons to make the adjustmetns. “Speed 0” is the slowest speed, “Speed 15” the fastest speed. Program Mode: 1. Plug the fixture in and press the MODE button until “Color Program” is displayed. 2. There are 15 built-in programs to choose from or you can select “sound active” to run the unit by sound. Select your desired program by pressing the UP and DOWN buttons. You can set your program Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 7 speed by following the next set of instructions. The direction of cer- tain programs can also be changed under Directions Set. Direction Set: This feature is used in conjunction with 36 DMX Channel mode, 54 DMX Channel mode and 72 DMX Channel mode. The direction in which the pixels light up can be reversed so that the pixel line up can start at either end of the bar. This feature is useful when the unit is installed in a reversed orientation so the unit itself does not have to be uninstalled and reversed. Example: When using 36 Channel mode, Channel 1 LEDs 1 & 2 can start at either end of the bar depending on the “Direction Set” set up. 1. To change the starting direction press the MODE button until “Direction Set” is displayed. 2. Press the UP or DOWN buttons to select “Positive” in which the pix- els light up from right to left, or “Negative” in which the pixels will light up left to right. Program Mode Speed Adjustment: 1. To adjust the speed of your program press the MODE button until “Color Speed” is displayed. 2. Press the UP or DOWN buttons to make the adjustmetns. “Speed 1” is the slowest speed, “Speed 16” the fastest speed. RGBW Mode: 1. 2. 3. 4. 5. 6. Plug the fixture in and press the MODE button until: When “Single Color Red” is displayed you are in Red dimming mode. Press the UP and DOWN buttons to adjust intensity. When “Single Color Green” is displayed you are in Green dimming mode. Press the UP and DOWN buttons to adjust intensity. When “Single Color Blue” is displayed you are in Blue dimming mode. Press the UP and DOWN buttons to adjust intensity. When “Single Color White” is displayed you are in White dimming mode. Press the UP and DOWN buttons to adjust intensity. You can use the color macro chart on page 1 7 to create one of the 68 macros. DMX Mode: Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. The ELED QW Strip has 9 DMX modes: 1 Channel mode, 2 Channel mode, 4 Channel mode, 5 Channel mode, 7 Channel mode, 8 Channel mode, 36 Channel Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 8

****** Page 5 ****** ELED QW strip Operating Instructions ELED QW strip Master-Slave Operation: Master-Slave Configuration mode, 54 Channel mode, and a 72 Channel mode. See pages 11-16 for each modes’ DMX traits. 1. 2. 3. 4. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller such as the Elation@ Show DesignerTM or the Elation@ DMX OperatorTM. To run your fixture in DMX mode, plug in the fixture via the XLR con- nections to any standard DMX controller. Select your desired DMX mode, and then press the UP or DOWN buttons to adjust the DMX address. DMX Channel Modes are as follows: This function will allows you to link units together to run in a Master-Slave mode. In Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling units built-in programs. Any unit can act as a Master or as a Slave however, only one unit can be pro- grammed to act as the “Master.” Master-Slave Connections and Settings: • To run the 1 Channel Mode, press the MODE button until “1 Channel DMX” is displayed. This is the DMX addressing for the 1 • To run the 2 Channel Mode, press the MODE button until “2 Channel DMX” is displayed. This is the DMX addressing for the 2 • To run the 4 Channel Mode, press the MODE button until “4 Channel DMX” is displayed. This is the DMX addressing for the 4 • To run the 5 Channel Mode, press the MODE button until “5 Channel DMX” is displayed. This is the DMX addressing for the 5 • To run the 7 Channel Mode, press the MODE button until “7 Channel DMX” is displayed. This is the DMX addressing for the 7 • To run the 8 Channel Mode, press the MODE button until “8 Channel DMX” is displayed. This is the DMX addressing for the 8 Channel Mode. Channel Mode. Channel Mode. Channel Mode. Channel Mode. Channel Mode. 1. 2. 3. 4. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data cables to link your units together. Remem- ber that the Male XLR connector is the input and the Female XLR connector is the ouput. The first unit in the chain (master) will use the female XLR connector only. The last unit in the chain will use the male XLR connector only. Set the “Master” unit to your desired mode or operation. For the “Slave” unit(s), set the display to any DMX channel mode. Connect the “Slave” unit or units and they will automatically start to follow the “Master.” • To run the 36 Channel Mode, press the MODE button until “36 Channel DMX” is displayed. This is the DMX addressing for the 36 Channel Mode. • To run the 54 Channel Mode, press the MODE button until “54 Channel DMX” is displayed. This is the DMX addressing for the 54 Channel Mode. • To run the 72 Channel Mode, press the MODE button until “72 Channel DMX” is displayed. This is the DMX addressing for the 72 Channel Mode. Please see pages 11-16 for DMX values and traits. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 9 Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 10

****** Page 6 ****** 1 2 3 4 Elation Professional ELED QW strip 16 255 1 Channel Function COLOR MACROS Mode ELED QW strip Channel 1 Value o – 255 ELED QW strip Channel 1 2 Value o – 255 o 255 PLEASE SEE COLOR MACRO CHART ON PAGE 17 2 Channel Mode Function COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 17 MASTER DIMMER – 100% Channel 1 2 3 4 5 Value o 255 o 255 o – 255 o 255 o – 255 ELED QW strip 4 Channel Mode Channel Value Function RED 00/0 100% GREEN 100% BLUE 100% WHITE 00/0 100% – elationlighting.com – ELED QW Strip Instruction Manual Page 1 1 ELED QW strip o 255 o 255 o – 255 o – 255 Channel 1 2 3 4 5 6 7 Value o – 255 o – 255 o – 255 o – 255 o – 255 0-15 5 Channel Mode Function RED 0% – 100% GREEN 0% – 100% BLUE 0% – 100% WHITE 0% – 100% MASTER DIMMER 0% – 100% 7 Channel Mode Function RED 0% – 100% GREEN 0% – 100% BLUE 0% – 100% WHITE – 100% COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 1 7 NOTHING STROBING/SPEED CONTROL MASTER DIMMER 0% 100% o 255 Channel 1, 2, 3, & 4 will not work, when Channel 5 is being used. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 12

****** Page 7 ****** ELED QW strip 0-15 16 – 255 128 – 159 160 – 191 192 – 223 224 – 255 8 Channel Function RED 100% GREEN 100% BLUE 100% WHITE 00/0 100% COLOR MACROS Mode ELED QW strip Channel 1 2 3 4 5 6 7 8 Value o – 255 o – 255 o – 255 o – 255 1 – 255 1 – 255 o- 127 o – 255 PLEASE SEE COLOR MACRO CHART ON PAGE 17 STROBING/PROGRAM SPEED C anne 1 2 3 4 5 6 7 8 a ue o – 255 o – 255 o – 255 o 255 o – 255 o – 255 o – 255 o – 255 36 Channel Mode unction RED (LED 1 & 2) 0% – 100% GREEN (LED 1 & 2) 00/0 – 100% BLUE (LED 1 & 2) 00/0 – 100% WHITE (LED 1 & 2) 0% – 100% RED (LED 3 & 4) 0% – 100% GREEN (LED 3 & 4) 0% – 100% BLUE (LED 3 & 4) 00/0 – 100% WHITE (LED 3 & 4) 00/0 – 100% NOTHING STROBING SLOW – FAST PROGRAM SPEED SLOW – MODE OFF AUTO MIX 3 COLOR JUMP 7 COLOR JUMP SOUND ACTIVE MASTER DIMMER 100% FAST *CHANNELS 9-28 THE SAME RGBW LED PATTERN CONTINUES* *THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE Channel 1, 2, 3, & 4 will not work, when Channel 5 is being used. When using Channel 7, Channel 6 will control the speed of the color changing. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 13 29 30 31 32 33 34 35 36 o – 255 o – 255 o – 255 o 255 o – 255 o – 255 o – 255 o – 255 RED (LED 15 & 16) 0% – 100% GREEN (LED 15 & 16) – 100% BLUE (LED 15 & 16) 00/0 – 100% WHITE (LED 15 & 16) 0% – 100% RED (LED 17 & 18) 0% – 100% GREEN (LED 17 & 18) 0% – 100% BLUE (LED 17 & 18) – 100% WHITE (LED 17 & 18) 00/0 – 100% Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 14

****** Page 8 ****** ELED QW strip a ue o – 255 o – 255 o – 255 o 255 o – 255 o – 255 o – 255 o – 255 54 Channel unction RED (LED 1) 0% – 100% GREEN (LED 1) 00/0 – 100% BLUE (LED 1) 00/0 – 100% RED (LED 2) 0% – 100% GREEN (LED 2) 0% – 100% BLUE (LED 2) 0% – 100% RED (LED 3) 00/0 – 100% GREEN (LED 3) 00/0 – 100% Mode ELED QW strip C anne 1 2 3 4 5 6 7 8 C anne 1 2 3 4 5 6 7 8 a ue o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 72 Channel Mode unction RED (LED 1) – 100% GREEN (LED 1) 00/0 – 100% BLUE (LED 1) 00/0 – 100% WHITE (LED 1) – 100% RED (LED 2) – 100% GREEN (LED 2) – 100% BLUE (LED 2) 00/0 – 100% WHITE (LED 2) 00/0 – 100% *CHANNELS 9-46 THE SAME RGBW LED PATTERN CONTINUES* *THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE *CHANNELS 9-64 THE SAME RGBW PATTERN CONTINUES* *THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 47 48 49 50 51 52 53 54 o – 255 o – 255 o – 255 o – 255 o 255 o – 255 o – 255 o – 255 GREEN (LED 16) 0% – 100% BLUE (LED 16) 0% – 100% RED (LED 17) 00/0 – 100% GREEN (LED 17) 00/0 – 100% BLUE (LED 17) – 100% RED (LED 18) 0% – 100% GREEN (LED 18) 0% – 100% BLUE (LED 18) – 100% 65 66 67 68 69 70 71 72 o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 o – 255 RED (LED 17) – 100% GREEN (LED 17) – 100% BLUE (LED 17) 00/0 – 100% WHITE (LED 17) 00/0 – 100% RED (LED 18) – 100% GREEN (LED 18) – 100% BLUE (LED 18) – 100% WHITE (LED 18) – 100% Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 15 Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 16

****** Page 9 ****** ELED QW strip Color Macro Chart 129-132 133-136 137-140 145-148 149-152 153-156 151-160 161-164 165-168 169-172 173-176 171-180 181-184 185-188 189-192 193-196 G 0 2ss 2ss 2ss 2ss 243 200 166 125 97 71 83 93 96 93 87 90 77 100 148 195 34 2ss 2S1 11S 138 147 138 147 169 B 0 34 164 112 83 77 83 77 74 77 74 77 77 134 182 236 2ss 2ss 2ss 2ss 2ss 2ss 2ss 2ss 144 1S3 147 186 251 2ss 2ss 2ss w o 80 80 71 83 11 83 11 14 11 14 74 11 83 93 96 93 81 90 71 71 61 81 71 144 153 147 138 147 138 147 138 2ss Macro mode33 Macro mode34 Macro mode3S Macro mode36 Macro mode37 Macro mode38 Macro mode39 Macro mode40 Macro mode41 Macro mode42 Macro mode43 Macro mode44 Macro mode4S Macro mode46 Macro mode47 Macro mode48 Macro mode49 Macro modeS0 Macro modeS1 Macro modeS2 Macro modeS3 Macro modeS4 Macro modeSS Macro modeS6 Macro modeS7 Macro modeS8 Macro modeS9 Macro mode60 Macro mode61 Macro mode62 Macro mode63 Macro mode64 Macro mode6S Macro mode66 Macro mode67 Macro mode68 ELED QW Color RED LUX x GRE(LUX) x BLU(LUX) x WHT LUXO x Strip DMX Black Macro model Macro mode2 Macro mode3 Macro mode4 Macro mode: Macro mode6 Macro model Macro mode8 Macro mode9 Macro mode10 Macro modell Macro mode12 Macro mode13 Macro mode14 Macro modelS Macro mode16 Macro model 7 Macro mode18 Macro mode19 Macro mode20 Macro mode21 Macro mode22 Macro mode23 Macro mode24 Macro mode2S Macro mode26 Macro mode27 Macro mode28 Macro mode29 Macro mode30 Macro mode31 Macro mode32 DMX o 5-8 9-12 13-16 17-20 21-24 25-28 29-32 33-36 37-40 41-44 45-48 49-52 53-56 57-60 61-64 65-68 69-12 73-16 77-80 81-84 85-88 89-92 93-96 91-100 101-104 10S-108 109-112 113-116 117-120 121-124 125-128 R 0 80 80 77 117 160 223 2ss 2ss 2ss 2ss 2ss 2ss 2ss 2ss 2ss 238 196 150 100 77 67 77 .77 158 2ss 2ss ISI ISI 138 141 -144 255 254 254 254 254 176 96 234 224 175 119 147 88 o o 52 1 o o o o o 1 o 209 42 o 8 107 165 o o o o 206 177 192 165 121 17 o 139 5 77 130 164 2 38 142 148 134 145 121 129 83 97 100 40 219 165 46 107 156 198 o o o o B 143 153 138 98 o o 11 171 97 173 199 212 163 86 208 209 201 212 192 184 115 166 167 86 182 85 35 222 231 247 189 2ss o o 2ss 0 w o o 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ELED QW STRIP 1m 908 6965 3631 1544 1784 7324 264 1408 323 1831 3154 3408 4396 2795 2431 2m 335 6962 3031 529 1782 7324 91 1409 320 632 3191 3463 1528 2852 2438 Photometric Chart 3m 165 6954 3030 258 1788 7308 46 1411 323 315 3186 3455 755 2436 191-200 201-204 205-207 208-210 211-213 214-216 211-219 220 222 223 226-228 229-231 232-234 235-237 238-240 241-243 247-249 2S0-2S2 2S3-2ss Elation Professional – elationlighting.com – ELED QW strip Instruction Manual Page 17 TOTAL-WHT(LUX) x Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 18

****** Page 10 ****** ELED QW strip Power Cord Daisy Chain ELED QW strip 2-YEAR LIMITED WARRANTY Warranty With this feature you can connect the fixtures to one another using the powercon input and output sockets. The quantity that can be connected is 6 fixtures maximum. After 6 fixtures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures. ELED QW strip Fuse Replacement First unplug the power. The fuse holder is located next to the power inlets. Using a flat-head screw driver unscrew the fuse holder. Remove the bad fuse and replace with a new one. ELED QW strip Cleaning Due to fog residue, smoke, and dust cleaning the internal and exter- nal optical lenses must be carried out periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Clean the external optics with glass cleaner and a soft cloth every 20 days. 3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). ELED QW strip Trouble Shooting Listed below are a few common problems the user may encounter, with solutions. Unit not responding to DMX: 1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected. Unit does not respond to sound: 1. Quiet or high pitched sounds will not activate the unit. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 19 A. Elation Professionalso hereby warrants, to the original purchaser, Elation Profes- sionalsc products to be free of manufacturing defects in material and workmanship for a period of two years (730 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the Elation Professionalsc factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professionalso will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professionalso shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the prod- uct is modified in any manner which Elation Professionalsc concludes, after inspec- tion, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Elation Professionalsc factory unless prior written authori- zation was issued to purchaser by Elation Professionalso; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, Elation Profession- also will replace defective parts at its expense, and will absorb all expenses for war- ranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation Professionalso under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professionalsc. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. Elation Professionalso reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by Elation Professionalso in connec- tion with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this prod- uct after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circum- stances shall Elation Professionalsc be liable for any loss or damage, direct or conse- quential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to Elation Professionalsc Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. Elation Professional – elationlighting.com – ELED QW Strip Instruction Manual Page 20

****** Page 11 ****** ELED QW strip Notes – elationlighting.com – ELED QW Strip Instruction Manual Page 21 ELED QW strip Elation Professional Elation Professional – Notes elationlighting.com – ELED QW Strip Instruction Manual Page 22

****** Page 12 ****** ELED QW strip Model: ELED QW strip Specifications SPECIFICATIONS: Working Position: Voltage*: LED’s: Power Consumption: Any safe working position 1 OOV 240V/47-63Hz 18 x 5 Watt Quad RGBW LED’s 15M Power Cord Daisy Chain:6 Fixtures Max. Fuse: Beam Angle: Weight: Dimensions: Colors: DMX Channels: arranty: 3.15 Amp 20+50 Degrees 21 lbs./ 9.5 kgs. 40.25″ (L) x 8.5″ (W) x 9″ (H) 1019 x 210 x 226mm RGBW Color Mixing 9 DMX Channel Modes: 1 Channel Mode, 2 Channel Mode, 4 Channel Mode, 5 Channel Mode, 7 Channel Mode, 8 Channel Mode, 36 Chan- nel Mode, 54 Channel Mode, & 72 Channel Mode 2 Year (730 days) *Auto Sensing Voltage: This fixture contains a automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. Elation Professional OEIation Professionals@ 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-3322 Fax: 323-832-9142 Web: elationlighting.com E-mail: info@elationlighting.com A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade Netherlands service@adjgroup.eu / americandj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 – elationlighting.com – ELED QW Strip Instruction Manual Page 23

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



ELATION PROFESSIONAL ELED QW (01) PDF MANUAL

Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.