Free English EDIMAX GP-101SF (01) PDF Document. Free English EDIMAX GP-101SF (01) PDF User Guide. Free English EDIMAX GP-101SF (01) PDF User Manual. Free English EDIMAX GP-101SF (01) PDF Owner Guide. Free English EDIMAX GP-101SF (01) PDF Owner Manual. Free English EDIMAX GP-101SF (01) PDF Reference Guide. Free English EDIMAX GP-101SF (01) PDF Instruction Guide. Free English EDIMAX GP-101SF (01) PDF Reference Manual. Free English EDIMAX GP-101SF (01) PDF Instruction Manual. Free English EDIMAX GP-101SF (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD EDIMAX GP-101SF (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the package for the EDIMAX GP-101SF?
The following items should be found in your EDIMAX GP-101SF package:
• GP-101SF PoE Splitter
• One DC power Y Cable (Inner 2.5Ø/outer 5.5Ø and inner 2.0Ø/outer 5.5Ø DC plug)
• Quick installation guide
What are the main features of the EDIMAX GP-101SF?
The features of the EDIMAX GP-101SF include:
• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3af standards
• Data and Power carried over the same cable
• Supports optional 5VDC, 9VDC or 12VDC power supply
• Supports Plug-and-Play without any configuration
How do I identify and use the external components of the EDIMAX GP-101SF?
The external components of the EDIMAX GP-101SF are as follows:
POWER+DATA IN: Connect this port to the PSE (Power Source Equipment) or PoE Injector with a CAT5 UTP cable.
DC OUT 5V/9V/12V: This slide switch allows you to choose the DC output of 5V, 9V, or 12V. Please make sure that the DC output power is correct, as a different voltage may destroy the connected device.
DATA OUT: Connect this port to the Ethernet device with a CAT5 UTP cable to transmit data.
DC OUT: Connect this port to the power port of the Ethernet device using the provided power cable to supply the power of 5V, 9V, or 12V DC.
How do I connect the EDIMAX GP-101SF PoE Splitter?
You can use the EDIMAX GP-101SF PoE Splitter with a PSE or PoE Injector to expand your network to a location that has no power line or outlet for devices such as APs, IP Cameras, or IP Phones. Follow these steps to connect the PoE Splitter correctly:
1. Use a CAT5 UTP cable to connect a PoE port of the PSE (e.g., PoE Switch) to the POWER+DATA IN port on the splitter.
2. Choose the appropriate DC output (5V, 9V, or 12V) by using the Power-mode switch. Note: Please make sure that the output is correct, as a different voltage may destroy the device.
3. Connect the LAN OUT port (labeled DATA OUT) to the Ethernet device with a CAT5 UTP cable for data transmitting.
4. Connect the DC OUT port to the power port of the same Ethernet device with the provided power cable.
The Ethernet device can now work normally with data and power. Note: The power of the Ethernet device is suggested to be under 10W.
What should I do if my EDIMAX GP-101SF causes harmful interference to radio or television reception?
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
CLICK HERE TO DOWNLOAD EDIMAX GP-101SF (01) PDF DOCUMENT