FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF USER GUIDE
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF USER MANUAL
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF OWNER GUIDE
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF OWNER MANUAL
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF REFERENCE GUIDE
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF REFERENCE MANUAL
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ECHOGEAR EGAV-CMIWF4-W1 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ECHOGEAR EGAV-CMIWF4-W1 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ECHOGEAR EGAV-CMIWF4-W1 (01) PDF SUMMARY:
What’s in the box?
The box contains the product and a toy surprise.
What are the important safety instructions?
- Read the entire manual before use and save the instructions.
- Avoid potential personal injuries and property damage.
- Only use for low voltage cabling (HDMI, audio, coax, or data cabling).
- Do not run power cords in-wall.
- Make sure you are comfortable with the install process before starting.
- Do not use the product for any purpose not specified by the manufacturer.
- The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
What should I do if I do not understand the instructions or have doubts about the safety of the product?
Contact The Echogear Pros at http://www.echogear.com.
What is a choking hazard?
This product contains small items that could be a choking hazard if swallowed. Keep away from children.
What should I do if parts are missing or damaged?
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts.
What is included inside the box?
Inside the box, a grommet is included. The quantity varies by model: EGAV-CMIWF4-B1 has 4, EGAV-CMIWF4-W1 has 4, and EGAV-CMIWF10-B1 has 10. The box also contains a driver bit (hole saw) and a hole saw at 1 1/2 inches.
Who should I contact if I’m confused?
Contact the ECHOGEAR Pros: US: 1-855-428-2490 or US: helpmehelpyou@ECHOGEAR.com or Europe: +44 (0) 800 0568188 or Europe: helpme@ECHOGEAR.com.
How do I assemble the product?
- Assemble the hole saw.
- Drill holes.
How do I insert the grommets?
Insert grommets into the drilled holes.
What should I do after inserting the grommets?
Route the cables and then power up.
What are the minimum thickness and space requirements?
Minimum Thickness for Drywall or Panel: 1/2 in. Minimum Space into Wall or Furniture: 1 in.
What is the first step to assemble the product?
Drill the holes at your desired locations.
What should I check before drilling holes?
Verify your cable length BEFORE drilling.
What can I use to pull cables through the wall?
Use a fish tape to pull cables through the wall.
How do I remove the product?
The instructions to remove the product are illustrated in the PDF.
What is the minimum thickness for drywall or panel?
The minimum thickness for drywall or panel is 1/2 in.
What is the minimum space into the wall or furniture?
The minimum space into the wall or furniture is 1 in.
What may be required for walls with blown-in type insulation?
Walls with blown-in type insulation may require removal of some insulation inside the cavity.
CLICK HERE TO DOWNLOAD ECHOGEAR EGAV-CMIWF4-W1 (01) PDF MANUAL