FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF DOCUMENT.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF USER GUIDE.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF USER MANUAL.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF OWNER GUIDE.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF OWNER MANUAL.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF REFERENCE GUIDE.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF REFERENCE MANUAL.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the default login credentials for the DW BLACKJACK CLIENT DW-BJDXCLIENT2 workstation’s operating system?
The default login information for the workstation’s OS is:
Username: dwuser
Password: Dw5pectrum
What is included in the box with the DW BLACKJACK CLIENT DW-BJDXCLIENT2?
| WHAT’S IN THE BOX | |
|---|---|
| Blackjack DX Workstation | 1 |
| Quick Start Guide | 1 |
| Keyboard and Mouse | 1 set |
| Power Cable | 1 |
What are the components on the front panel of the DW BLACKJACK CLIENT DW-BJDXCLIENT2?
The front panel of the workstation consists of the following components:
F1: Power Button/ Power LED
F2: Mic in (3.5mm)
F3: Audio out (3.5mm)
F4: 2x USB 3.0 ports
F5: 2x USB 2.0 ports
F6: HDD Activity LED
What are the ports on the rear panel of the DW BLACKJACK CLIENT DW-BJDXCLIENT2?
The rear panel of the DW BLACKJACK CLIENT DW-BJDXCLIENT2 features the following ports:
B1: Power Port
B2: Antenna Ports (not used)
B3: Line-in (light blue)
B4: Front Speaker (lime)
B5: Microphone (pink)
B6: USB 3.2 Gen2 Type-A Port
B7: USB 3.2 Gen2x2 Type-C Port
B8: USB 2.0 Port
B9: USB 3.2 Gen2 Port
B10: USB 2.0 Ports
B11: Displayport outputs
B12: True HD output
B13: 1G LAN RJ45 Port
B14: 2.5G LAN RJ45 Port
There is also a section marked “DO NOT USE”.
What are the specifications for the DW BLACKJACK CLIENT DW-BJDXCLIENT2?
| DESCRIPTION | DW-BJDXCLIENT2 |
|---|---|
| Included IP licenses | N/A |
| Form factor | Slim Desktop |
| Operating system | Windows 11 IoT Enterprise LTSC |
| OS on SSD | 256GB M.2 SSD |
| CPU | Intel i7 processor |
| Memory | 16GB |
| Ethernet port | 1x 1G Ethernet (RJ45) 1x 2.5Gb Ethernet (RJ45) |
| Storage | Maximum HDD: 1x HDD Maximum storage: 4TB HDD for local video export USB interface: Yes |
| Video-out | Output ports: 1x true HD, 1x DisplayPort Maximum number of monitors: Up to two (2) monitors simultaneously Video card: nVidia® RTX 3050 6GB Resolution (per output): 7680 x 4320 |
| Pre-loaded VMS software | DW Spectrum Client |
| Keyboard and mouse | Included |
| Power supply | 300W (270W)** |
| Operating temperature | 41°F~104°F (5°C~40°C) |
| Operating humidity | 20~90% RH |
| Dimensions | Standing: 13.1″ x 3.88″ x 15.8″ (334 x 98.5 x 402 mm) Desktop: 3.88″ x 13.1″ x 15.8″ (98.5 x 334 x 402 mm) |
| Other certification | FCC, CE, RoHS, NDAA, TAA |
| Warranty | 5 year limited |
* UPS recommended
Specifications and components mentioned are subject to change without notice.
How do I perform the initial setup for the DW BLACKJACK CLIENT DW-BJDXCLIENT2 workstation?
STEP 1: Connect external devices, power and network.
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B13 on the rear panel diagram).
NOTE: See the rear panel breakdown for a detailed diagram of the ports.
2. Connect the workstation to an appropriate power source. A UPS system rated for 600VA or higher per PSU is recommended.
3. Connecting the power cable to a live power source may turn on the workstation automatically. If the workstation does not turn on automatically, press the power button on the front of the workstation (F1 on the front panel diagram).
How do I configure the date and time on the DW BLACKJACK CLIENT DW-BJDXCLIENT2?
STEP 2: Configure date and time (Windows OS)
1. Double-click on the Date and Time icon on the desktop.
2. The default time zone is UTC-08:00 Pacific Time. Click Change time zone… to change to the correct time zone.
3. Click OK after selecting the correct time zone.
4. Click Change date and time… to update the date and time if they are not correct.
NOTE: Verify the time zone before updating the date and time. Time may show 2 or 3 hours off due to an incorrect time zone.
5. Press OK after adjusting to the correct date and/or time. Press OK to close the date and time when done.
CLICK HERE TO DOWNLOAD DW BLACKJACK CLIENT DW-BJDXCLIENT2 (01) PDF DOCUMENT