DRAPER 70433 (01) PDF Document

The symbols on the product provide important information for its safe use:

Voltage Warning: Before plugging in your tool, make sure the socket voltage matches that on the product plate. If the socket voltage does not match that shown on the type plate, it can result in a serious hazard and damage to your tool.

Read Manual: Important: Read instruction manuals before operating and servicing this equipment.

Indoor Use Only: For indoor use. Do not expose to rain.

230V: Rated voltage.

100W (example icon): Motor capacity in Watts.

3.5 kg (example icon): Machine weight.

WEEE symbol: Waste Electrical & Electronic Equipment. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish.

Class 1 Appliance Symbol: Class 1 appliance (Must be earthed).

ErP: Energy related Products.

UKCA: UK Conformity Assessed.

CE: European conformity.

Please read the following instructions carefully to avoid serious personal injury:

• Keep out of the reach of children.

• Ensure the fan is situated and used in an area free from loose furnishings, clothing, curtains etc that could get sucked into the fan air inlet, or could block the fan blades.

• Do not leave the fan running unattended.

• Ensure the fan is situated and used in an area free from dust and ash that could be sucked up and cause air pollution. This will also damage the motor.

• Remove the plug from the socket before carrying out adjustment, servicing or maintenance.

• Complete any assembly procedures prior to connection to the power supply.

• Never insert fingers, pencils, or any other object through the protective grille, while the fan is running.

• Disconnect the fan from the power supply when moving it from one location to the other.

• Ensure the fan is switched off from the mains supply before removing the grille.

• Always complete the assembly of the fan before switching it on after cleaning.

• Always ensure the fan is secure on a firm and secure surface before operating.

• Do not use the fan near an open window, as rain can create an electrical hazard.

• If the power supply cable becomes damaged, it should be replaced immediately.

• If replacement of the supply cord is necessary, this should be carried out by the manufacturer or appropriate agent in order to avoid a safety hazard.

• Do not use this fan with an independent externally connected speed control device.

• Do not cover when in use.

• Do not use in the immediate surroundings of a bath, shower or swimming pool.

Caution: Risk of electric shock. Do not open.

This appliance is supplied with an approved plug and cable for your safety. The value of the fuse fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.

Make sure the power supply information on the machine’s rating plate is compatible with the power supply you intend to connect it to. If a replacement plug is to be fitted, this must be carried out by a qualified electrician. The damaged or incomplete plug, when cut from the cable, shall be disabled to prevent connection to a live electrical outlet.

This appliance is Class I and requires an earth connection to protect against electric shock from accessible conductive parts in the event of a failure of the basic insulation.

If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all instructions supplied with the extension lead. If using a coiled extension lead, ensure that the entire cable is unwound to prevent overheating and a potential fire.

Carefully remove the product from the packaging and examine it for any sign of damage. Check the contents against the identified parts. If any part is damaged or missing, do not attempt to use the product. The packaging material should be retained during the warranty period, in case the product needs to be returned for repair.

Warning!

• Some of the packaging materials may be harmful to children. Do not leave any of these materials within reach of children.

• If any of the packaging is to be thrown away, make sure it is disposed of correctly, according to local regulations.

This fan is supplied fully assembled and ready for use. Always ensure the fan is switched off, the mains plug is removed, and the fan blade has stopped rotating before moving it.

The speed is selected using the push buttons on the switch box:

• 0 = Off

• 1 = Slow

• 2 = Middle

• 3 = Fast

To adjust the angle and direction of the fan, gently push or pull on the top of the fan housing to tilt it to the desired position. Do not exert excess pressure, as damage to the fan may occur.

Follow these steps for proper maintenance:

1. Always unplug the fan from the power supply before cleaning.

2. All plastic components should be cleaned with a damp cloth. DO NOT spray with water/cleaning agents or immerse the fan unit in water.

3. Warning! Ensure that any water and/or cleaning detergent DOES NOT enter the motor housing or switch mechanism.

4. Ensure that the unit is clean, dry and correctly assembled after cleaning and before every use.

At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area.

In all circumstances:

• Do not dispose of power tools with domestic waste.

• Do not incinerate.

• Do not dispose of WEEE* as unsorted municipal waste.

*Waste Electrical & Electronic Equipment.