Free English DENVER ELECTRONICS DSB-4010MK2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DENVER ELECTRONICS DSB-4010MK2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I connect the DENVER ELECTRONICS DSB-4010MK2 to my television or other devices?
You can hear audio through the Soundbar using ONE of the following connections:
1. Connect to your television using one of the connectors:
HDMI-ARC connector on the TV (using an HDMI cable)
Optical output connector on the TV (using an optical cable)
Headphone jack (using the supplied audio cable with 3.5mm plug)
2. Connect to a Bluetooth enabled device.
3. Connect to a USB drive (stick) loaded with music files.
How do I operate the control panel buttons on the DENVER ELECTRONICS DSB-4010MK2?
| Button Symbol | Function |
|---|---|
| Power / MODE |
Hold down for Power On/Standby. Press to toggle the sources: Bluetooth -> USB Drive -> Line In -> HDMI-ARC -> Optical In |
| Play/Pause / MUTE |
Press/Hold down for Pause/Play. (USB Drive) Press/Hold down for Mute / No Mute. (Line In) |
| VOL+ / Next |
Hold down for Volume up. Press for Next USB Drive Song. |
| VOL- / Previous |
Hold down for Volume down. Press for Previous USB Drive Song. |
What do the LED display codes indicate on the DENVER ELECTRONICS DSB-4010MK2?
| Display | Description |
|---|---|
| L INE | Line In source |
| bt | Bluetooth source |
| USb | USB source when connecting to a USB drive. USB source cannot be selected if no USB drive is connected. |
| Arc | HDMI-ARC source |
| OPt | Optical In source |
What do the specific LED light behaviors mean regarding Bluetooth and Standby on the DENVER ELECTRONICS DSB-4010MK2?
“bt” (Bluetooth) flashes: The Soundbar is not paired or connected to a Bluetooth device.
“bt” (Bluetooth) lights up: The Soundbar is paired or connected to a Bluetooth device.
Red light: The Soundbar is switched to standby.
What are the functions of the remote control buttons for the DENVER ELECTRONICS DSB-4010MK2?
| Symbol | Function |
|---|---|
| Power Icon | Switch the product on or to standby |
| Mute Icon | Mute or restore volume |
| Volume + | Increase volume |
| Volume – | Decrease volume |
| |<< | Skip to previous audio file during USB play |
| >>| | Skip to next audio file during USB play |
| >|| | Start or pause play during USB play |
| Loop Icon | Repeat audio play during USB play |
| EQ | Select different preset sound settings |
| MODE | Select an audio source |
How do I change the equalizer settings on the DENVER ELECTRONICS DSB-4010MK2 and what modes are available?
Press the EQ button on the remote control to toggle different preset sound settings shown below:
| Display | EQ mode |
|---|---|
| Eq0 | Normal |
| Eq1 | Rock |
| Eq2 | Pop |
| Eq3 | Classic |
| Eq4 | Jazz |
| Eq5 | Country |
What are the important notices for wall mounting the DENVER ELECTRONICS DSB-4010MK2?
1) Wall-mounted installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage! (If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.)
2) It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the unit and wall brackets.
3) Additional tools (not included) are required for the installation.
4) Do not overtighten screws.
5) Use an electronic stud finder to check the wall type before drilling and mounting.
6) The proposed height on the wall is 1.0~1.5 meters.
What are the technical specifications of the DENVER ELECTRONICS DSB-4010MK2?
Power/Amps: Input: AC110~240V, 50/60Hz, Output: DC19V, 1.5A
Power consumption: 28.5W
Max output power: 40W
Working temperature: 0~35° C
Bluetooth version: 5.0
Operating frequency range: 2402-2480Mhz
Soundbar measurement: 80cm x 6cm x 6cm
What items are included in the packing list for the DENVER ELECTRONICS DSB-4010MK2?
Sound bar
Manual
3.5mm to 3.5MM audio cable
Flat head screws (D7.5 * L25mm) x 2
Remote control with batteries
Mains Power supply
CLICK HERE TO DOWNLOAD DENVER ELECTRONICS DSB-4010MK2 (01) PDF DOCUMENT