Free English DENVER ELECTRONICS DSB-4010 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DENVER ELECTRONICS DSB-4010 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I place or mount the DENVER ELECTRONICS DSB-4010?
Place the Soundbar on a flat and solid surface. Alternatively, you can wall mount the Soundbar with the screws provided.
How do I connect the DENVER ELECTRONICS DSB-4010 to my television?
You can connect to your television using one of the following connectors:
1. HDMI-ARC connector on the TV (using an HDMI cable).
2. Optical output connector on the TV (using an optical cable).
3. Headphone jack (using the supplied audio cable with 3.5mm plug).
What other devices can I connect to the DENVER ELECTRONICS DSB-4010 besides a TV?
In addition to a TV, you can:
1. Connect to a Bluetooth enabled device.
2. Connect to a USB drive (stick) loaded with music files.
Why can’t I hear TV audio through the DENVER ELECTRONICS DSB-4010 when using Optical or HDMI-ARC connections?
To hear TV audio through the Soundbar via Optical or HDMI-ARC connection, make sure that the LINE IN jack on the Soundbar is not plugged in.
How do I operate the control panel buttons on the DENVER ELECTRONICS DSB-4010?
The control panel buttons function as follows:
Power / MODE button:
Press to switch the Soundbar on or to standby.
When the LINE IN jack is plugged in, press and hold to toggle sources: Line In -> Bluetooth -> USB Drive.
When the LINE IN jack is not plugged in, press and hold to toggle sources: Bluetooth -> USB Drive -> HDMI-ARC -> Optical In.
Play/Pause / MUTE button:
Press to start or pause play.
Press and hold to mute or restore volume.
VOL+ / Next button:
Press to increase volume.
Press and hold to skip to the next audio file during USB play.
VOL- / Prev button:
Press to decrease volume.
Press and hold to skip to the previous audio file during USB play.
What do the LED display codes mean on the DENVER ELECTRONICS DSB-4010?
The LED display indicates the selected source:
| Display | Source |
|---|---|
| LINE | Line In source |
| bt | Bluetooth source |
| USb | USB source when connecting to a USB drive. (USB source cannot be selected if no USB drive is connected). |
| Arc | HDMI-ARC source |
| OPt | Optical In source |
What do the Bluetooth status lights indicate on the DENVER ELECTRONICS DSB-4010?
“bt” flashes: The Soundbar is not paired or connected to a Bluetooth device.
“bt” lights up: The Soundbar is paired or connected to a Bluetooth device.
Additionally, when the Soundbar is switched to standby, the red light is turned on.
What are the functions of the remote control buttons for the DENVER ELECTRONICS DSB-4010?
| Symbol/Button | Function |
|---|---|
| Power Icon | Switch the product on or to standby |
| Mute Icon | Mute or restore volume |
| Volume + | Increase volume |
| Volume – | Decrease volume |
| Previous (|<<) | Skip to previous audio file during USB play |
| Next (>>|) | Skip to next audio file during USB play |
| Play/Pause (>||) | Start or pause play during USB play |
| Repeat Icon | Repeat audio play during USB play |
| EQ | Select different preset sound settings |
| MODE | Select an audio source |
What are the available EQ modes on the DENVER ELECTRONICS DSB-4010?
Press the EQ button on the remote to toggle the following preset sound settings:
| Display | EQ Mode |
|---|---|
| Eq0 | Normal |
| Eq1 | Rock |
| Eq2 | Pop |
| Eq3 | Classic |
| Eq4 | Jazz |
| Eq5 | Country |
What are the technical specifications of the DENVER ELECTRONICS DSB-4010?
| Feature | Specification |
|---|---|
| Power/Amps | Input: AC110~240V, 50/60Hz; Output: DC19V, 1.5A |
| Power consumption | 36W/Hour |
| Operating frequency range | 40hz-16Khz |
| Max output power | 40W (RED Standard) |
| Soundbar measurement | 80 x 6 x 6cm |
| Bluetooth name | DSB-4010 |
What is included in the packing list for the DENVER ELECTRONICS DSB-4010?
The packing list includes:
Soundbar
User manual
Audio cable (3.5 to 3.5mm)
Screws x 2
Remote control with batteries
Power adapter
CLICK HERE TO DOWNLOAD DENVER ELECTRONICS DSB-4010 (01) PDF DOCUMENT