DEEP SEA ELECTRONICS DSE9476 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD DEEP SEA ELECTRONICS DSE9476 (01) PDF MANUAL


PDF Content Summary: 053-235 ISSUE 1 DANGER OF DEATH: LIVE PARTS exist within the DSE9476 enclosure. The enclosure cover must not be removed. INSTALLATION The DSE9476 is a 24 V, 20 A battery charger which is designed to be mounted within a control panel, utilising the integral mounting holes. The DSE9476 battery charger is fit-and-forget. It may be permanently connected to the A.C. supply and the load, with no requirement to disable the charger during times of heavy load (such as engine cranking) or when in parallel with a charging alternator. BATTERY SUITABILITY The charger is factory set by DSE to suit Lead Acid batteries, configuration is possible to suit other battery types using the DSE Configuraiton Suite PC Software which is available from deepseaplc.com. Care must be taken to ensure the batteries connected to the charger are of the correct ‘technology’ to suit the setting of the charger. INDICATIONS The DSE9476 Battery Charger features LED indicators to show the battery charger status. DIMENSIONS AND MOUNTING Parameter Specification Case Dimensions 248 mm x 183 mm x 76 mm (9.74 ” x 7.19 ” x 3.00 ”) Mounting Holes Dimensions Suitable for M5 (0.23 ” diameter) Mounting Hole Spacings 233 mm x 150 mm (9.17 ” x 5.91 ”) NOTE: The DSE9476 battery charger is designed to be mounted with the base to a vertical surface with the terminal strips at the bottom. NOTE: This document is intended as a ‘quick start’ guide only. For full operating instructions and specifications, refer to DSE publication: 057-282 DSE9476 Operator Manual. DEEP SEA ELECTRONICS DSE9476: 24 V, 20 A Battery Charger Installation Instructions TYPICAL CONNECTION DIAGRAM Parameter Specification Connection Type Screw terminal, rising clamp, no internal spring Min Cable Size (AC Supply) 2.0 mm2 (AWG 15) Min Cable Size (Charge Output) 1.0 mm2 (AWG 18) Min Cable Size (All Other Connections) 0.5 mm2 (AWG 20) Max Cable Size (AC Supply) 3.3 mm2 (AWG 12) Max Cable Size (All Other Connections) 2.5 mm2 (AWG 14) Recommended AC Fuse 230 V AC Input 110 V AC Input 5.0 A anti-surge 10.0 A anti-surge

Deep Sea Electronics Plc. Tel: +44 (0)1723 890099 Fax: +44 (0)1723 893303 Email: sales@deepseaplc.com Web: deepseaplc.com Deep Sea Electronics Inc. Phone: +1 (815) 316-8706 Fax: +1 (815) 316- 8708 Email: sales@deepseausa.com Web: deepseausa.com


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply