Free English CASIO HS-3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CASIO HS-3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do before using my CASIO HS-3 stopwatch for the first time?
A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch.
What are the functions of the buttons on the CASIO HS-3 stopwatch?
Button A (START/STOP): Press this button to start and stop elapsed time measurement.
Button B (SPLIT/LAP): Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP time on the display (timing continues internally). Press again to display the ongoing time measurement. You can repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time measurement is stopped resets the time to all zeros.
Button C (MODE): Press this button to toggle between the SPLIT time mode and LAP time mode.
How can I tell if my CASIO HS-3 is in SPLIT mode or LAP mode?
The display on your stopwatch indicates the current mode.
• A solid line under the word “SPLIT” indicates the SPLIT mode.
• A solid line under the word “LAP” indicates the LAP mode.
What is the maximum time the CASIO HS-3 stopwatch can measure?
The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
What is the difference between a SPLIT time and a LAP time on the CASIO HS-3?
A SPLIT is the time from the start of an event up to any specific point.
A LAP is the time for one segment (lap) of an event.
How do I perform a normal time measurement with the CASIO HS-3?
1. Press Button A to START.
2. Press Button A to STOP.
3. Press Button B to reset to zero.
How do I measure net times (accumulated time excluding loss time) with my CASIO HS-3?
1. Press Button A to START timing.
2. Press Button A to STOP timing (for the duration of the lost time).
3. Press Button A to START again to resume timing.
4. Press Button A to STOP at the end.
5. Press Button B to reset to zero.
How do I measure SPLIT times with the CASIO HS-3 stopwatch?
1. In SPLIT mode, press Button A to START timing.
2. Press Button B to freeze the SPLIT time on the display. Timing continues internally.
3. Press Button B to release the display and see the current running time.
4. Repeat steps 2 and 3 for subsequent splits.
5. Press Button A to stop the timing completely.
6. Press Button B to reset.
How do I time 1st and 2nd place finishers using my CASIO HS-3?
1. In SPLIT mode, press Button A to START the race.
2. When the first runner finishes, press Button B. The time of the first runner will be displayed.
3. When the second runner finishes, press Button A. This stops the timer.
4. Press Button B to display the time of the second runner.
5. Press Button B again to reset.
How do I perform LAP timing (timing for each segment of an event) on my CASIO HS-3?
1. In LAP mode, press Button A to START timing.
2. At the end of a lap, press Button B to freeze the LAP time on the display.
3. Press Button B again to release the display and see the running time of the next lap.
4. Repeat steps 2 and 3 for subsequent laps.
5. Press Button A to stop the timing completely.
6. Press Button B to reset.
CLICK HERE TO DOWNLOAD CASIO HS-3 (01) PDF DOCUMENT