Free English CASIO CS-90P (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CASIO CS-90P (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the correct way to tighten screws and nuts on the CASIO CS-90P?
Use the hex key provided to tighten the screws. Use the spanner provided to tighten the nuts.
What components should I have before starting the assembly of the CASIO CS-90P?
Before starting, confirm you have the following parts: metal part, legs, brackets, covers, hook, screws, nuts, piano unit mounting screws, hex key, spanner, and piano cover.
How should I prepare the CASIO CS-90P for assembly?
Place the metal part on a soft cloth or similar material with the side that attaches to the piano unit facing downwards.
How do I attach the legs to the metal part of the CASIO CS-90P?
Using the screws, loosely fasten the legs to the metal part so that the corresponding numbers match up.
How do I attach the brackets to the CASIO CS-90P stand?
Place the stand upwards and attach the brackets with the screws.
How do I secure the legs of the CASIO CS-90P?
Secure the legs with the nuts and fully tighten the screws that were fastened in the previous step.
How do I attach the covers to the CASIO CS-90P?
Fit the hooks on the covers into the holes on the brackets and push the covers downwards. Attach the hook to the cover so that it fits over the projecting lug in the center of the cover.
How do I mount the piano unit to the CASIO CS-90P stand?
Position the underside of the piano unit so that it is aligned with the metal parts on each side. Fasten the stand to the piano unit with the piano unit mounting screws.
How do I adjust the height of the CASIO CS-90P stand to prevent wobbling?
Turn the adjusters on the legs to adjust the height. If there is a gap between the end of a leg and the floor, adjust the leg to eliminate the gap.
How do I correctly place the piano cover on the CASIO CS-90P?
Place the piano cover over the piano unit so that the belt is at the front of the piano and the flap is at the back.
How do I fold the piano cover for the CASIO CS-90P?
Fold the piano cover flap and the side with the belt attached under, and place the cover with the marked section facing upwards.
What is the process for folding the CASIO CS-90P piano cover?
Fold the left and right ends in so that they line up with the brown marking, and then fold the left and right ends in again. Fold the cover in half so that the white marking is in the center. Then turn the cover around so that the belt is at the top.
How do I hang the piano cover on the CASIO CS-90P stand?
Once folded, you can hang the cover over the hook attached to the stand.
What are the safety warnings regarding the location of the CASIO CS-90P?
Do not locate the product on an unsteady platform, on an uneven surface, or in any other unstable location. Take care to avoid locations such as folded carpeting or on top of the power cord.
Can I climb on the CASIO CS-90P stand?
No, do not climb up on the product or rock it back and forth as doing so creates the risk of the stand falling over.
How should I move the CASIO CS-90P safely?
Always use both hands to pick it up. The product should always be moved by two people, one at each end, after first disconnecting any cables.
What precautions should be taken with the CASIO CS-90P piano cover regarding fire?
Do not use the cover close to an open flame, as it could catch fire.
What is the requirement for the CASIO CS-90P stand assembly regarding screws?
Always use the screws provided. Using screws other than those specified could cause damage or an accident.
What should I place under the CASIO CS-90P stand to protect the floor?
Spread felt or some other type of cloth under the stand to avoid direct contact between the rubber on its legs and the floor surface.
How many people are required to set up the CASIO CS-90P?
This product must always be set up and moved by at least two adults.
What should I avoid doing while mounting or moving the CASIO CS-90P?
When mounting or moving the instrument, do not drag or tilt the stand.
What are the safety risks if screws on the CASIO CS-90P stand are not tightened correctly?
If the screws are not securely tightened or the product is not attached in the correct position, the stand could tip over, resulting in the product falling and causing injury.
Why do CASIO CS-90P stand screws loosen over time?
The screws may loosen due to factors such as vibration and changes in temperature or humidity.
What should I do if I notice the CASIO CS-90P is unsteady while playing?
Should you notice any unsteadiness, missing screws, loose screws, or any other problems while playing, contact your original retailer or a CASIO Service Center.
How should I clean the CASIO CS-90P piano cover?
Wash by hand using a mild detergent, and dry indoors in a well-ventilated location.
Can I use an iron on the CASIO CS-90P piano cover?
Iron dry at a low temperature using a protective cloth. Do not steam iron. Do not iron the synthetic leather sections.
What should I avoid doing with the fabric of the CASIO CS-90P piano cover?
Do not pull or stretch with excessive force as this could cause deformation or damage.
Are tangled threads on the surface of the CASIO CS-90P piano cover a defect?
Threads on the surface of the cloth may appear tangled. This is a normal characteristic of the material and does not impair its quality or functionality.
What precautions should be taken when children use the CASIO CS-90P?
If this product is used by a child or in the presence of children, always take care to ensure that adequate adult supervision is provided.
Should the CASIO CS-90P stand be used for purposes other than those specified?
No, do not use the stand and piano cover for anything other than the specified purpose.
What is the proper procedure for tightening the screws and nuts during CASIO CS-90P assembly?
Use the hex key (J) to tighten the screws (G) and the spanner (K) to tighten the nuts (H).
Is it recommended to tighten CASIO CS-90P screws before playing?
Yes, check for loose screws before playing. If any of the screws are loose, retighten them securely.
What are the assembly component parts listed for the CASIO CS-90P?
The components are: Metal part, Legs, Brackets, Covers, Hook, Screws, Nut, Piano unit mounting screw, Hex key, Spanner, and Piano cover.
How should the metal part of the CASIO CS-90P be positioned during preparation?
Place the metal part on a soft cloth or similar material with the side that attaches to the piano unit facing downwards.
How should the CASIO CS-90P stand be oriented when attaching brackets?
Place the stand upwards and attach the brackets with the screws.
How are the covers installed on the CASIO CS-90P?
Fit the hooks on the covers into the holes on the brackets and push the covers downwards. Attach the hook to the cover so that it fits over the projecting lug in the center of the cover.
What is the recommended installation side for the hook on the CASIO CS-90P?
We recommend that it be attached on the right as you face the piano.
How do you align the piano unit with the CASIO CS-90P stand?
Position the underside of the piano unit so that it is aligned with the metal parts on each side.
What fasteners are used to secure the CASIO CS-90P to the stand?
Fasten the stand to the piano unit with the piano unit mounting screws.
How to address gaps between the CASIO CS-90P leg and the floor?
If there is a gap between the end of a leg and the floor, adjust the leg to eliminate the gap.
Where should the belt be positioned when putting the cover on the CASIO CS-90P?
Place the piano cover over the piano unit so that the belt is at the front of the piano and the flap is at the back.
What is the correct way to place the cover before folding the CASIO CS-90P cover?
Fold the piano cover flap and the side with the belt attached under, and place the cover with the marked section facing upwards.
After folding the CASIO CS-90P piano cover, what direction should the belt be facing?
Turn the cover around so that the belt is at the top.
What does the recycle mark on the CASIO CS-90P packaging indicate?
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany.
Are there any restrictions on ironing the CASIO CS-90P piano cover?
Yes, iron dry at a low temperature using a protective cloth and do not steam iron. Additionally, do not iron the synthetic leather sections.
What should I check periodically for the CASIO CS-90P?
Periodically check for loose screws and securely tighten any loose screws found.
How do I safely lift the CASIO CS-90P when moving it?
Always use both hands to pick it up. The product should be moved by two people, one at each end, after disconnecting any cables.
Is it safe to place the CASIO CS-90P on a high shelf?
No, do not locate the product on an unsteady platform, on an uneven surface, or in any other unstable location.
What should be avoided when assembling the CASIO CS-90P to prevent injury?
Take care not to trap your hand or other body parts during assembly.
Why must the CASIO CS-90P be installed by two or more people?
This product must always be set up and moved by at least 2 adults to prevent the stand from tipping over and the instrument from falling, which creates the risk of personal injury.
Does the CASIO CS-90P piano cover require special care during laundry?
Wash by hand using a mild detergent, and dry indoors in a well-ventilated location.
CLICK HERE TO DOWNLOAD CASIO CS-90P (01) PDF DOCUMENT