CARVIN GC412T (01) PDF MANUAL

CARVIN GC412T (01) PDF SUMMARY:

What should I do if I find damage to my speaker upon receiving it?

If you find any damage to your speaker, notify the shipping company and CARVIN. Save the carton and all packing materials. In the event you have to re-ship your unit, always use the original carton and packing material.

What should I do if I have missing items in my order?

If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring.

Where do I record the serial number?

Record the serial number on the enclosed warranty card or on the manual for your records. Keep your portion of the card and return the portion with your name and comments.

How do I use the speaker cables?

The PH8 is a standard cable featuring 1/4” plugs and heavy 16 gauge copper wire. You can daisy-chain up to one additional speaker per cable by using the unused 1/4” OUTPUT jack on your speaker jack plate. Be sure to note the total impedance to the amp so it is not lower than its recommended impedance.

What precautions should I take when using the speaker?

Do not exceed the power rating marked on the rear connect plate. Excessive power will destroy drivers. Distortion from power amps will destroy drivers much faster than clean power. Water, moisture, and dust are harmful to drivers, causing failure that is not covered under warranty.

What is covered under the warranty?

CARVIN loudspeakers are covered by a one-year limited warranty unless otherwise stated. Warranty coverage is limited to original manufacturer defects only.

What does the warranty not cover?

The warranty does not cover opened or burned voice coils, torn cones caused by improper packing or abuse, and damage from rain or moisture.

How do I get service in the USA?

Call 800-854-2235 for an RMA # (return authorization number). Write this number on the box and enclose a description of the problem. Prepay to Carvin 12340 World Trade Drive, SD, CA 92128.

How do I get service outside the USA?

Contact your dealer or go to http://www.carvinworld.com for your nearest service center. Include a written description of the problem with serial number and date of purchase.

What does the stereo/mono switch do?

The stereo/mono switch allows you to run your stereo pre-amps, effects, and power amps with only a single cabinet.

What are the rear connection features?

Two standard 1/4” phone jacks are featured. One is for connecting to the power amp, and the other is for connecting to an additional speaker system.