FREE ENGLISH CAPLE WF1552 (01) PDF USER GUIDE

FREE ENGLISH CAPLE WF1552 (01) PDF USER MANUAL

FREE ENGLISH CAPLE WF1552 (01) PDF OWNER GUIDE

FREE ENGLISH CAPLE WF1552 (01) PDF OWNER MANUAL

FREE ENGLISH CAPLE WF1552 (01) PDF REFERENCE GUIDE

FREE ENGLISH CAPLE WF1552 (01) PDF INSTRUCTION GUIDE

FREE ENGLISH CAPLE WF1552 (01) PDF REFERENCE MANUAL

FREE ENGLISH CAPLE WF1552 (01) PDF INSTRUCTION MANUAL

FREE ENGLISH CAPLE WF1552 (01) PDF OPERATING INSTRUCTIONS


CLICK HERE TO DOWNLOAD CAPLE WF1552 (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

CAPLE WF1552 (01) PDF SUMMARY:

What are the warnings I should be aware of before using this appliance?

To prevent damaging the door gasket, make sure the door is fully open when pulling shelves out of the rail compartment. The appliance must be positioned so that the plug is accessible. Release the electric cord and move your cabinet to its final location. Do not move your cabinet while loaded with wine as you may distort the body. The wine cabinet should be installed in a suitable place in order to avoid touching the compressor. After unpacking, make sure that the appliance is in perfect order. If you have any doubt, do not use it and contact your retailer. If the supply cord is damaged, it must be replaced by a Caple service agent or a similarly qualified person in order to avoid a hazard.


What are the intended uses for this appliance?

This appliance is intended to be used in household and similar applications such as: * Staff kitchen areas in shops, offices and other working environments. * Farm Houses. * By clients in hotels, motels and other residential type environments. * Bed and breakfast type environments. This appliance is intended to be used exclusively for the storage of wine.


What are the important electrical safety instructions?

Read all instructions before using the wine cabinet. Be aware of the risk of child entrapment. Before you throw away your old wine cabinet: Take off the door, leaving the shelves in place so that children cannot easily climb inside. Never allow children to operate, play with, or crawl inside the appliance. Never clean appliance parts with flammable fluids, as the fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance, The fumes can create a fire hazard or explosion. The refrigerant of this appliance is R600a, flammable and explosive articles should not be put in or near the cabinet, to avoid the risk of fire or explosion. Cleaning and user maintenance shall not be made by children without supervision. When positioning the appliance, ensure the supply cord is not trapped or damaged.


What other safety precautions should I take?

Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance. Store wine in sealed bottles. Do not use a plug adapter. Do not overload the cabinet. Do not open the door unless necessary. Do not cover shelves with aluminium foil or any other shelf material which may prevent air circulation. Should the wine cabinet be stored without use for long periods it is suggested, after careful cleaning, to leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible formations of condensation, mould or odours. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant circuit. Do not use electrical appliances inside the storage compartments of the appliance, unless they are the type recommended by the manufacturer.


How should I install my wine cabinet?

Before using your wine cabinet: Remove the exterior and interior packing. Before connecting the wine cabinet to the power source, let it stand upright for at least 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. Make sure to turn the unit off and unplug it from the outlet. Place your wine cabinet on a floor that is strong enough to support it when it is fully loaded. To level your wine cabinet, adjust the front levelling leg at the bottom of the wine cabinet. Ensure it is perfectly level, as this will minimise any vibrations. This appliance uses flammable refrigerant. Never damage the cooling pipework during transportation. Locate the wine cabinet away from direct sunlight and sources of heat (ovens, hobs, heaters, radiators, etc.).


What should I keep in mind in terms of the door seal when I first install the appliance?

To protect the appliance in transit and delivery the door is packed tightly against the cabinet. When first installed this can mean the door seal appears thinner on one side of the door due to compression, this is normal and once out of the box it will relax over a short period of time and the door will return to the normal position. If you wish to speed up the process you can gently warm the seal with a hair dryer on a low temperature setting. This can help relax the seal helping it return to normal thickness a little faster.


What are the electrical connection guidelines?

Plug the Wine cabinet into an exclusive, properly installed, grounded wall outlet. Do not under any circumstances cut or remove the third (ground) pin from the plug. It is fitted with a power cord having an earth wire terminating in a 13amp plug.


How do I operate the wine cabinet?

Use the cabinet within ambient temperatures between 16-32°C. If the ambient temperature is higher or lower, it will cause the temperature to fluctuate in the cabinet, possibly preventing it from reaching 5-18°C.


How do I set the temperature for the Upper and Middle zones?

The temperature setting range is as followed: Upper compartment: 5 – 18°C Middle compartment: 5 – 10°C When the system enters the temperature set up. With each press of the ▲ key, the temperature setting of the upper zone will increase by 1°C. When the temperature setting reaches the upper limit of 18°C, the temperature setting will return to 5°C. With each press of the ▼ key, the temperature setting of the upper zone will decrease by 1°C. When the temperature setting reaches the lower limit of 5°C, the temperature setting will return to 18°C. When the system enters the temperature set up. With each press of the ▲ key, the temperature setting of the middle zone will increase by 1°C. When the temperature setting reaches the upper limit of 10°C, the temperature setting will return to 5°C. With each press of the ▼ key, the temperature setting of the middle zone will decrease by 1°C. When the temperature setting reaches the lower limit 5°C, the temperature will return to 10°C. To view the actual temperature inside the wine cabinet, press the ▲ or ▼ key and hold for approximately 5 seconds. The actual temperature of the upper or middle zone will be displayed on the control board. After 5 seconds the temperature will return to the set temperature.


How do I set the temperature for the Lower zone?

The temperature setting has the following range: Lower compartment: 10 – 18°C.

To view the actual temperature inside the wine cabinet, press the ▲ or ▼ key and hold for approximately 5 seconds. The actual temperature of the lower zone will be displayed on the control board. After 5 seconds the temperature will return to the set temperature.


What do the different LED states mean?

Flashing LED = Cabinet Temperature. Steady LED = Set Temperature.


What happens if the unit is unplugged or there’s a power outage?

If the unit is unplugged, power is lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the wine cabinet will not start. When you use the wine cabinet for the first time or you restart the cabinet after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine cabinet has been running for a few hours everything will be back to normal.


Does the wine cabinet have a temperature recollection function?

Yes, in the event of a power interruption, the wine cabinet remembers the previous temperature settings. When the power is recovered, the cabinet temperature will go back the same setting temperature prior to powering off.


Is there a temperature alarm?

Yes, If internal cabinet temperature is higher than 23°C, “HI” is shown in the display panel, and the alarm sounds after one hour continuously to warn that the inner temperature is too high. If internal temperature is lower than 0°C, “LO” is shown in the display panel, the alarm sounds and the malfunction indicator lights up at the same time.


What is the Control panel for the Upper and Middle Zone?

It has touch control keys for setting and displays the temperature for the upper and lower windows.


What do each of the symbols mean on the Control Panel for the Upper and Middle Zone?

Here is a breakdown:

SYMBOL SETTING
💡 Used to switch the internal light on/off
পাওয়ার বাটন To switch the appliance on/off (press and hold this button for approximately 3 seconds)
To set the temperature of the upper compartment
To set the temperature of the middle compartment
UPPER WINDOW Displays the temperature in the upper compartment
LOWER WINDOW Displays the temperature in the middle compartment

What is the function of each control on the Lower Zone Control Panel?

Here’s a table summarizing the controls:

SYMBOL SETTING
To increase the temperature by 1°C
To decrease the temperature by 1°C
WINDOW Displays the temperature in the lower compartment.

How to change from Celsius and Fahrenheit? Press and hold both ▲ and ▼ for 3 seconds to change the display from °C to °F.


How do I control the internal light?

In order to reduce energy consumption, the LED light within this wine cabinet will automatically switch off after 10 minutes. If you would prefer the LED light to remain on continuously, this is possible. Please press and hold 💡 key for 5 seconds and the display will show “LP”. After 4 seconds the display will revert back to normal and the light will remain on until manually switched off.

If you would like to revert back and conserve energy (recommended), press and hold the 💡 key for 5 seconds and the display will show “LF”. After 4 seconds the display will revert back to normal, and the light will automatically switch off after 10 minutes.


How do I use the shelves?

To prevent damaging the door gasket, make sure to have the door fully opened when pulling shelves out of the rail compartment. For easy access to the storage content, you can pull the shelves approximately 1/3 out of the rail compartment.


How do I remove the shelves?

The cabinet is designed with a notch on each side of the shelf tracks to prevent bottles from falling. To remove a shelf, first pull it outward until it stops at the notch. Then lift the edge of the shelf upward and pull out of the cabinet.


How do I reinstall a shelf?

To reinstall a shelf, follows the removing the shelf instructions in reverse.


How do I replace the Charcoal Filter?

Charcoal filters are located in the top left corner of each wine cabinet zone.

  1. Open the door and remove the top 2 shelves.
  2. Turn the filter as per Fig A.
  3. As per Fig B, the filter should line up with the notches as shown.
  4. Pull the filter out (Fig C).
  5. Insert replacement filter and twist as per Fig A to lock into position.
  6. Re-install the shelves.

NOTE: The charcoal filter should be replaced every 3-6 months depending on the unit’s exposure level to odour.


How to reverse the door opening?

This appliance has reversible doors but is delivered with a right hinged door. The left-hand hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit, follow the directions below:

  1. Uninstall the upper hinge screw with screw driver (1) and then take out the right upper hinge (2).
  2. Move up and take out of the door. Put the door carefully.
  3. Take out the upper door axis tube?3?decoration nail (4)(6) and decoration cover (5).
  4. Uninstall the left lower door movement plate screw (8) and take out the door movement plate.
  5. Uninstall the right lower door axis supporter screw (9) and take out right door axis supporter (10).
  6. Install the door movement plate (7) onto the left upper corner of the door; Take out the left door axis supporter (11) and door axis tube from accessory bag and install the left door axis supporter (11) onto right upper corner of the door; install the door axis tube onto right lower corner of the door.
  7. Uninstall the 6pcs screw of plinth and take out plinth (14); Uninstall the right lower door hinge screw (15) and door supporter screw (13); Take out the right lower hinge (16) and door supporter (12); Then Install the door supporter to right side.
  8. Take the left lower door hinge (17) from the accessory bag and then install it to left side; Then install the plinth back.
  9. Rotate the door by 180 degree and insert the door axis pin into the left lower door hinge hole; Close the door and finally install the left upper door hinge (18); Put back the decoration nail and decoration cover.

How do I use the door lock?

The unit is provided with a lock and key combination. The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counter clockwise to unlock the door. To lock the door, do the reverse operation making sure the metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.


What is the maximum wine bottle storage?

Stores max. 111 Bordeaux style bottles 750ml.


What is the stacking configuration of wine bottles? There are full shelves, half shelves and glass shelf, Display Shelf. The distribution will depend on different model.


What should I do if I want to store other styles of bottles?

If you wish to store other style bottles i.e champagne, the maximum storage capacity will be less than as shown above. Shelves may also need to be removed to allow more bottles to be stored.


How do I clean my wine cabinet?

Turn off the power, unplug the appliance, and remove all items including shelves and rack. Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to 2 pints of water. Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.


What should I do in case of a power failure?

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimise the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.


What should I do with the wine cabinet during holidays?

Short Holidays: Leave the wine cabinet operating during holidays of less than three weeks. Long Holidays: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odour and mould growth, leave the door open slightly (blocking it open if necessary).


What should I do when moving the wine cabinet?

Remove all items. Securely tape down all loose items (shelves) inside your appliance. Turn the adjustable leg up to the base to avoid damage. Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.


What are some energy-saving tips?

The Wine Cabinet should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.


What is the recommended temperatures?

RECOMMENDED STORAGE TEMPERATURES:

DRINK TYPE RECOMMENDED TEMPERATURE
For storing all types of wines 12°C to 14°C
RECOMMENDED DRINKING TEMPERATURES:
DRINK TYPE RECOMMENDED TEMPERATURE
Champagne NV, Sparkling 6°C
Champagne Vintage 10°C
Dry White Semillon, Sauvignon Blanc 8°C
Dry White Gewürztraminer, Riesling 10°C
Dry White Chardonnay 10°C
Vintage Chardonnay 14°C
Sweet White Sauternes Monbazillac, Late Harvest ice wine 10°C
Sweet whites vintage Sauternes 14°C
Beaujolais 13°C
Red Pinot Noir 16°C
Vintage Pinot Noir red 18°C
Red Cabernet, Merlot, French, Australian, New Zealand, Chilean, Argentinean, Italian, Spanish, Californian 18°C
Red Grenache, Syrah 16°C

CLICK HERE TO DOWNLOAD CAPLE WF1552 (01) PDF MANUAL


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.