Click here to download CAPLE C3249 (01) PDF MANUAL
PDF Content Summary:
****** Page 1 ****** @ caple Classic Built-In Electric Double Oven Instruction Manual 0249 Contact Caple on 0117 938 7420 for spare parts or caple.co.uk
****** Page 2 ****** CONTENTS Safety Instructions Environmental Protection Oven Installation Using your Oven Cooking Guidelines Touch Control Electronic Timer Care and Maintenance Telescopic Runners Side Racks Troubleshooting Caple Service Contact Details 3 9 II 16 18 21 24 28 28 29 32 2 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 3 ****** SAFETY INSTRUCTIONS Read these instructions carefully and completely before using your appliance, keep it in a convenient place for reference when necessary. This appliance can be used by children aged from 8 years and above. – Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge must be supervised and given appropriate instruction concerning the use of the appliance in a safe way and understand the hazards involved. – Children shall not play with the appliance. – Cleaning and user maintenance should not be carried out by children without supervision. – The appliance is not intended to be operated by means of an external timer or separate remote control system. WARNING: – The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. – Children less than 8 years of age should be kept away unless continuously supervised. To prevent fire hazards do not store items on the cooking surfaces. – If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. Please keep this instruction manual for future reference Instruction manual 0249
****** Page 4 ****** WARNING: – During use, handles can get hot. – Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass or any other surface of the appliance as it can scratch the surface which may result in the glass shattering or permanent damage to the surface. – Do not use steam cleaners for cleaning the appliance. – Ensure the appliance is switched off before replacing the light to avoid the possibility of electric shock. CAUTION: – Accessible parts may be hot when the cooking or grilling is in use. Young children should be kept away. – Your appliance is produced in accordance with all applicable local and international standards and regulations. – Maintenance and repair work must be made only by authorised Caple service technicians. Installation and repair work that is carried out by unauthorised technicians may endanger you. – It is dangerous to alter or modify the specifications of the appliance in any way. – Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency) and the requirements of the appliance are compatible. The requirements for this appliance are stated on the rating label. 4 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 5 ****** This appliance is designed only for cooking food and is intended for indoor use. – This product is not designed for commercial use, it is a household appliance only. It is not intended to be used in: – Staff kitchen areas in shops, offices and other working environments. Bed and breakfast type environments By clients in hotels, motels and other residential type environments Do not try to lift or move the appliance by pulling the door handle. All possible security measures have been taken to ensure your safety. Since the glass may break, you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with accessories. Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it must be replaced by a Caple service technician or similarly qualified persons in order to prevent a hazard While the oven door is open, do not let children climb on the door or sit on it. INSTALLATION WARNINGS Do not operate the appliance before it is fully installed The appliance must be installed by an authorised technician. Please keep this instruction manual for future reference Instruction manual 0249
****** Page 6 ****** Caple is not responsible for any damage that may be caused by defective placement and installation by unauthorised persons. -L When unpacking the appliance, make sure that it is not damaged during transportation. In the case of any defect; do not use the appliance and contact your retailer or Caple Service immediately. -n Materials used for packaging (nylon, staplers, styrofoam etc) may cause harmful effects to children they should be disposed of immediately. Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain, snow etc. The surrounding materials of the appliance (i.e. kitchen cabinet or furniture) must be able to withstand a minimum temperature of 1200C. DURING USAGE Heat the empty oven at max. temperature for 1 hour before its first use. This removes any unpleasant smells and smoke caused by working residues and thermal insulation. Make sure you do this in a well ventilated area. During usage, the outer and inner surfaces of the oven get hot. While opening the oven door, step back to avoid the hot steam coming out of the oven as there may be a risk of burns. – Do not put flammable or combustible materials in or near the appliance when it is operating. 6 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 7 ****** – Always use oven gloves to remove and replace food in the oven. – Pay close attention to the oven while cooking with solid or liquid oils as they could potentially catch fire when oven is hot. – Never pour water on flames that are caused by oil. Cover the saucepan or frying pan with its lid in order to choke the flame and turn the oven off. – If you know you will not be using the appliance for a while switch it off from the main supply and unplug it. – Make sure the appliance control knobs are always in the 10′ (stop) position when it is not used. – The oven shelves and trays incline when pulled out. Be careful not to let hot liquid spill over. – When the door of the oven is open, do not leave anything on it. It may unbalance your appliance or damage the door. – Do not put anything heavy, flammable or ignitable (nylon, plastic bag, paper or cloth etc) into the oven. This includes cookware with plastic accessories (e.g. handles). Do not hang towels or clothes from the appliance or its handles. INDICATOR LIGHTS – The indicator lights above the control panel go on/off when the heating elements are inserted or removed. During the thermostatic functioning of the oven, the neon light remains on until the pre-chosen temperature Please keep this instruction manual for future reference Instruction manual 0249
****** Page 8 ****** is reached and when it goes out, this is a sign that the temperature has been reached. When the oven cools, the thermostat determines the re-insertion of the heating elements with consequent re-lighting of the indicator lights. The internal oven light is always on when any function is in operation. DURING CLEANING AND MAINTENANCE – Always switch off the appliance from the mains isolating the electrical supply before any cleaning or maintenance. – Do not remove the control knobs to clean the control panel. To maintain the efficiency and safety of your appliance, we recommend you always use original* spare parts and to call only our authorised Caple Service agents in case of need. 8 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 9 ****** ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the retailer where you purchased the product. CE DECLARATIONS OF CONFORMITY This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC). UKCA DECLARATIONS OF CONFORMITY CA This appliance has been manufactured to the strictest standards and complies with all applicable legislation. TECHNICAL FICHE This appliance conforms to all current and applicable energy regulations. To view the Technical Fiche that supports the energy labelling data, please visit the product page on our website caple.co.uk Please keep this instruction manual for future reference Instruction manual 0249
****** Page 10 ****** WARRANTY Your new appliance is covered by warranty. The warranty card is enclosed – if it is missing, you must provide the following information to your retailer in order to receive a replacement: date of purchase, model and serial number (placed on the inside of the appliance storage drawer). Registration can also be completed online by visiting caple.co.uk. Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase. If you fail to show your warranty card you will incur all repair charges. Spare parts are only available from Caple Service and spare parts authorised centres. ATTENTION Before use, remove all plastic films protecting some parts of the appliance (fascia – panel, parts in stainless steel, etc) Do not use the appliance to heat a room. When the appliance is not in use, we recommend you turn it off, isolate it from the electrical supply and ensure all gas taps are closed. 10 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 11 ****** OVEN INSTALLATION PLEASE CHECK THE FOLLOWING BEFORE INSTALLATION: The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture is made of veneered wood, the adhesives should be able to withstand a temperature of 1 200C. Plastic materials or adhesive which cannot withstand this temperature will become deformed or unstuck. To comply with safety regulations, once the appliance has been fitted it should not be possible to make contact with the electrical parts. All parts which offer protection should be fixed in such a way that they cannot be removed without the use of a tool. – Ensure that the appliance is switched off before replacing the light to avoid the possibility of electric shock. IMPORTANT: Ensure the oven is disconnected from the mains prior to installation. Installation should be carried out according to the instructions by a professionally qualified person. Caple cannot accept responsibility for any damage to persons, animals or other items due to incorrect installation. Secure the appliance into its surround by inserting screws into the 4 holes that can be seen in the frame of the oven when the door is open (Fig. l). Fig.l Please keep this instruction manual for future reference Instruction manual 0249
****** Page 12 ****** ‘Din. 500 Fig.2 23mm Fig.3 – For the most efficient air circulation, the oven should be fitted according to the dimensions shown in Fig.2 and Fig.3 Openings at least 50mm deep must be cut both in the bottom and in the top of the unit to ensure adequate ventilation (see Fig.2 for dimensions). 12 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 13 ****** CONNECTION TO THE MAINS SUPPLY WARNING: THIS APPLIANCE MUST BE EARTHED Check that the power rating of the mains supply is suitable for the maximum power of the appliance as indicated on the rating label. The fuse rating for this appliance is 32amp. – The appliance is supplied with a mains lead it should be “Hard wired” as follows: The “yellow/green” earth wire, which must be connected to a terminal, and has to be about I Omm longer than the other wire. The neutral wire has to be connected to the terminal marked with a letter N. – The Live wire should only be connected to the terminal marked L. Mains connection can also be made by fitting a double pole switch with a minimum gap between the contacts of 3mm, proportionate to the load and complying with the regulations in force. THE YELLOW/GREEN EARTH WIRE SHOULD NOT BE CONTROLLED BY THE SWITCH. When a double pole switch is used for mains supply connection it should be easily accessed, once the appliance is in position. IMPORTANT: Position the mains supply cable so that it is never subjected to a temperature which is more than 500C above ambient temperature. The electrical safety of the appliance can only be guaranteed when it has been correctly connected to an efficient earthed power supply, as instructed in the regulations for electrical safety. – Caple cannot be held responsible for any damage to persons or objects due to lack of an earth connection. Please keep this instruction manual for future reference Instruction manual C3249 13
****** Page 14 ****** ELECTRICAL CONNECT ON FITTING THE POWER SUPPLY CABLE Open the terminal box by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover Install the power supply cable by loosening the cable light screw and the three wire contact screws. Connect the wires to the corresponding terminals: the Blue wire to the terminal marked ‘N’,the Brown wire to the terminal marked ‘L’ and the yellow/green wire to the terminal marked O – Secure the cable by fastening the clight screw. – Close the cover of the terminal box. When wiring the terminal box care must be taken to fit and tighten the links on the live (L) and neutral (N) terminals 14 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 15 ****** WIRING AND SAFETY The instructions given below MUST be adhered to during wiring: This appliance is designed to connect to 220-240V- and is rated at 32Amps and as such needs to be hard wired to the electrical supply. – If the electrical supply is different from the value given above, call Caple Service immediately. – Wiring of the appliance must be performed by a qualified installer/electrician. The earth cable must be connected via the terminal screw with the earthing mark. Supply cable connection must be as shown in the diagram. If there is no earthed outlet conforming to regulations in the installation environment, the installation cannot go ahead and an Electrician should be consulted immediately. The installation must include a suitable isolating switch with a minimum contact opening of 3mm between the appliance and the mains. The isolating switch should be sized according to the load on the rating plate “32Amp”and should comply with current regulations. – The earthed outlet must be in close vicinity of the appliance. Never use an extension lead. The supply cable should not make contact with the product’s hot surface. – In case of any damage to the supply cable, please call Caple Service. The cable must be replaced by a qualified installer/electrician) Faulty wiring may damage the appliance. Such damage will not be covered by the warranty. When wiring the terminal box care should be taken to fit and tighten the links on the live and neutral terminals Please keep this instruction manual for future reference Instruction manual 0249 15
****** Page 16 ****** US NG YOUR OVEN CONTROL PANEL Top oven 4 functions / main oven 8 functions •c 150 TOP OVEN FUNCTIONS Zl CONVENTIONAL HEAT •c -1- Both the lower and upper heating elements operate together. This is the traditional cooking method, perfect for roasting joints, cooking pastry and baking cakes. Zl BASE HEAT This function is good for cooking the underside of food, warming up food or sterilising glass jars. It is also ideal for slow cooking food, i.e. casseroles. This function can be used between 500C and MAX. TOP HEAT This function can be used for warming pre-cooked food when placing the grid on the second shelf from the top. Or for defrosting pastry, place on grid on the bottom shelf. FULL GRILL This function can be used for grilling and gratinating food. When grilling, the oven door must be closed. 16 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 17 ****** BOTTOM OVEN FUNCTIONS LIGHT Internal oven light Zl CONVENTIONAL HEAT Both the lower and upper heating elements operate together. This is the traditional cooking method, perfect for roasting joints, cooking pastry and baking cakes. TURBO DEFROST The air at ambient temperature is distributed inside the oven to speed up defrosting time. FAN HEAT Both the fan and the circular heating element operate together. The fan evenly distributes the hot air (between 500C and MAX) inside the oven. This is ideal for cooking several types of food i.e. meat and fish at the same time without affecting taste and smell. It is also ideal for delicate pastries. TURBO BASE HEAT Both the fan and the lower heating element operate together. The air which is heated by the lower heating element is circulated by the fan helping to distribute the heat between 50 and 2000C. This function can be used for sterilising glass jars. ECO GRILL This function can be used for grilling and gratinating small quantities of food. This function can be used with the door closed for very short times (5-10 minutes). For longer times, half-open the door. FULL GRILL This function can be used for grilling and gratinating food. When grilling, the oven door must be closed. TURBO GRILL This function can be used for grilling and gratinating food. When grilling, the oven door must be closed. Please keep this instruction manual for future reference Instruction manual 0249
****** Page 18 ****** COOKING GUIDELINES – Set the function for the type of cooking required. Preheat the oven, setting the thermostat to the required temperature. Once the oven has heated to the selected temperature, the orange warning light will go out. This same light will appear again automatically during operation of the oven to indicate that the heating elements are on. – Remove the drip tray when using the oven for conventional cooking, roasting etc. The tray should be left in place only when using the grill, as its purpose is to catch falling droplets of fat. Food should be placed in oven dishes with raised edges and positioned centrally under the grill. If the fan heat operation is selected, different foods can be cooked simultaneously (e.g. meat and fish), although in this case the respective cooking time must be observed. COOKING FUNCTION Conventional cooking Grilling (Top oven) Grilling (Main oven) FOOD TYPE Yorkshire Pudding Sponge Cake Small Cakes Fruit Tart Scones Fruit Cake Pork chops (4 pcs) Sausages (6 pcs) Toast (6 pcs) Pork chops (4 pcs) Steak (4 pcs) Sausages (6 pcs) Toast (6 pcs) SHELF POSITION 1 1 2 1 2 1 3 3 3 5 5 5 5 TEMPERATURE 200 180 190 200 220 140 225 225 225 250 250 250 250 TIME (MINS) 30-40 25-30 15-20 40-45 10-15 120-180 Side 1 12 6 1 Side 1 15 10 9 Side 2 10 5 1 Side 2 12 8 6 1 18 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 19 ****** TEMPERATURES AND TIMES FOR MAIN OVEN COOKING DISHES SWEET Short pastry flan Fruit pie/tart Shortcake biscuits Savoury biscuits MEAT Slow roast Quick roast Meat loaf POULTRY Duck 1 5-2kg Goose 3 kg Roast chicken Turkey 5kg GAME Hare Haunch of venison TEMPERATURE 200 200 200 200 175 200 200 200 200 200 175 200 175 190 190 190 190 170 190 190 170 180 190 150 180 175 TIME (MINS) 8-10 25-35 10-15 15-20 12-15 12-15 30-40 120-180 150-210 60-90 240 60-90 90-180 Frozen meat should be thoroughly thawed before cooking. For large joints it is advisable to thaw overnight. Frozen poultry should be thoroughly thawed before cooking, the time required depends on the size of the bird e.g. a large turkey may take up to 48 hours to thaw. – Adjust the shelf position so the meat or poultry will be in the centre of the oven. The times given in the roasting guide are only approximate because the size and age of the bird will influence cooking times as will the shape of a joint and the proportion of bone. Please keep this instruction manual for future reference Instruction manual C3249 19
****** Page 20 ****** ROASTING GUIDE COOKING IN OVEN 1800C FAN HEAT CONVENTIONAL HEAT Beef Lamb Pork Fowl NOTE: Rare Medium Well done Medium Well done TIME 20 minutes per 450g (1 lb) plus 20 minutes 25 minutes per 450g (1 lb) plus 20 minutes 30 minutes per 450g (1 lb) plus 30 minutes 25 minutes per 450g (1 lb) plus 25 minutes 30 minutes per 450g (1 lb) plus 30 minutes 35 minutes per 450g (1 lb) plus 35 minutes 20 minutes per 450g (1 lb) plus 20 minutes If you are cooking a very large turkey, we recommend that it is turned around halfway through cooking, so that both legs will be cooked evenly. Remove any excess fat from the tin before turning, to prevent any fat splashing. – When cooking stuffed meat or poultry calculate the cooking time from the total weight of the meat plus the stuffing. For joints cooked in foil and for lidded casseroles, add 5 minutes per 450g (11b) to the calculated cooking time. Smaller joints weighing less than 1.25 kg (21b) may require 5 minutes per 450g (11b) extra cooking time. 20 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 21 ****** TOUCH CONTROL ELECTRON C TIMER SETTING AND CHANGING THE CURRENT TIME NOTE: The oven only operates when the time has been set. stop TIMER FUNCTIONS Countdown Cook time End time Stop Time When the appliance has been connected to the electrical supply or when there has been a power cut, @ flashes automatically. the time indicator To change the time that has already been set, press the time button @ repeatedly, until the time indicator flashes Set the current time using the button After or approx. 5 seconds, the flashing stops and the clock displays the time of day set. The appliance is now ready to use The time can only be changed if neither of the automatic functions (cook time or end time Z) have been set. To set a countdown, a signal sounds after the time has elapsed. This function does not affect the operation of the oven. To set how long the oven is to be in use. To set when the oven is to switch off again. To set, change or check the time. Please keep this instruction manual for future reference Instruction manual C3249 21
****** Page 22 ****** HOW TO USE THE CLOCK FUNCT ON – When a function has been selected, the corresponding function indicator flashes for approx. 5 seconds. During this time the desired times can be set using button. or When the desired time has been set, the function indicator flashes for approx. another 5 seconds. After that the function indicator is then lit. The set time begins to run. – Press any of the buttons to stop the acoustic signal. – The desired oven function and temperature can be selected before or after the clock functions of STOP cook time and end time are set. – When the cooking time has ended, turn the oven function and temperature dial back to the OFF position. COUNTDOWN Cl flashes. button repeatedly, until the countdown indicator – Press Using the button, set the required countdown (max. 2 hours 30 minutes). or – After approx. 5 seconds, the display shows the remaining time. The countdown indicator will light up. – When the time has elapsed, the function indicator flashes and an acoustic signal sounds for 2 minutes. Press any button to switch off the signal. COOK TIME Press selection button repeatedly, until the cook time indicator flashes. Using the button, set the required cooking time. or After approx. 5 seconds, the display returns to the current time. The cook time indicator will light up. – When the time has elapsed, the cook time indicator will flash, an acoustic signal will sound for 2 minutes and the oven will switch itself off. Press any button to switch the signal and the programme off. 22 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 23 ****** STOP END TIME flashes. – Press selection button repeatedly, until the end time indicator Using the button, set the required switch-off time. or – After approx. 5 seconds, the display returns to the current time. STOP The end time indicator will light up. – When the time has lapsed, the function indicator will flash, an acoustic signal will sound for 2 minutes and the oven will switch itself off. Press any button to switch the signal and the programme off. STOP COOK TIME AND END TIME stop – Cook time and end time can be used simultaneously, if you want the oven to be automatically switched on and off at a specific time. – Using the cook time function set the period of time that the dish requires to cook. For example, I hour. STOP – Using the end time function set the time at which the dish is to be ready. In this example, 14:05. STOP The cook time and end time light up and the time is shown in the display. In this example, 12:05. The oven will automatically switch itself on at the appropriate time as calculated. In this example, at 1 3:05 and will switch itself off when the cooking time set has elapsed. In this example, at 14:05. Please keep this instruction manual for future reference Instruction manual C3249 23
****** Page 24 ****** CARE AND MAINTENANCE This appliance is for household use only, don’t use it outdoors IMPORTANT: Unplug your oven before cleaning, or performing maintenance. To extend the life of your oven, it must be cleaned frequently, keeping in mind that: – Do not use steam equipment to clean the appliance. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water. Do not clean the appliance by spraying water onto or into the oven. – Don’t clean the appliance when it is still hot. The inside and external surface of the oven should be cleaned with a damp cloth when it has cooled down. Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper towel or cloth. If you use your oven for an extended period of time, condensation may form. Dry it using a non- abrasive cloth. – There is a rubber seal surrounding the oven opening which guarantees its perfect functioning. Check the condition of this seal on a regular basis. If necessary, clean it, avoid using abrasive products or objects to do so. Should it become damaged, please contact Caple Service. We recommend you do not use the oven until it has been repaired. Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking and even damage the enamel. – Clear the glass door using a damp cloth and dry it with a non-abrasive cloth. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. 24 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 25 ****** REPLACING THE OVEN LIGHT – Switch off your oven at the mains. – Remove the glass cover, by unscrewing this from the light socket. Remove the light bulb by pulling it from the light socket and replace it with a similar bulb. Halogen lamp characteristics voltage: AC220V-240V Wattage: 25W cap: G9 Light socket Light Light bulb Glass cover CAVITY – Remount the glass cover and reconnect the appliance to the power supply. DO NOT TOUCH the light bulb directly with your hands. WARNING: Ensure the appliance is disconnected from the mains before replacing the light to avoid the possibility of an electric shock. Please keep this instruction manual for future reference Instruction manual 0249 25
****** Page 26 ****** DISSEMBLING THE OVEN DOOR To make it easier to clean the inside of your oven, the oven door can be removed, by proceeding as follows: Open the door completely and lift the 2 levers Now, shut the door slightly, you can lift it out by pulling out the hooks ‘A’ as shown below. ASSEMBLING THE OVEN DOOR With the door in a vertical position, insert the two hooks ‘A’ into the slots. – Ensure that ‘D’ is hooked perfectly onto the edge of the slot (move the oven door backwards and forward slightly) Keep the oven door open fully, unhook the 2 levers ‘B’ downwards and then shut the door again. O D 00 o Scan the QR code below to access the ‘How to video’. 26 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 27 ****** REMOVING THE GLASS FROM THE DOOR The oven door is made up of 3 panes of glass and has vents at the top and bottom. When the oven is operating, air is circulated through the door to keep the outer pane cool. If condensation has worked its way in between the glass panes, the door can be dismantled in order to clean in- between the panes. – Remove the door as per above instruction and place it on a protective surface (e.g. on a table cloth) to prevent it getting scratched. The door handle should line up with the edge of the table. Make sure the glass lies flat to avoid breakage of glass during cleaning. – Undo the 2 screws on upper bracket. Take out upper bracket and first pane of glass. Loosen the 4 clips. – Slide out middle pane of glass carefully. Clean the glass panes and other parts with a damp microfibre cloth or a clean sponge and a solution of hot water with a little washing-up liquid. Wipe dry using a soft cloth. Step 1 Step 2 Step 3 Step a Please keep this instruction manual for future reference Instruction manual 0249 27
****** Page 28 ****** TELESCOPIC RUNNERS (OPTIONAL ACCESSORY) To assemble the telescopic runners: Remove the side racks (see Fig. 1 and Fig.2) – Choose which shelf to use with the telescopic runner. Pay attention to the direction in which the runner is to be extracted, position joint ‘B’ and joint JC’ on the frame (see Fig. l). – Squeeze the bars together slightly and clip either end of the telescopic runners on to the side racks. Finally, re-fit the side racks (See Fig. 1 and Fig.2) NOTE: Telescopic runners are optional accessories and are not included. SIDE RACKS Left guide rail Right guide rail 00 004 Figure 1. To install, attach side rack by hanging these through the 2 holes in the side of the oven cavity, and pushing them onto the round steel clip towards the bottom. To remove, unclip the side racks from the side of the oven. Figure 2. 28 Instruction manual 0249 Please keep this instruction manual for future reference
****** Page 29 ****** TROUBLESHOOTING The oven does not operate The oven does not heat The interior light does not illuminate Lower and upper parts of the oven are not cooking evenly Check it is switched on at the mains There has been a power cut The time is not set The thermostat is not turned to a temperature Check the product is connected to the electrical supply and is switched on Replace the bulb Control the shelf location, cooking period and temperatures according to the manual If you still experience any problems with your appliance please contact Caple Service on 01 17 938 7420 or email service@caple.co.uk Please keep this instruction manual for future reference Instruction manual 0249 29
****** Page 30 ****** TECHNICAL SPECIFICATION MODEL Height Width Depth Usable volume C3249 888mm 595mm 546mm 401tr and 61 Itr 220-240V Rated Voltage TOP OVEN NOMINAL ELECTRICAL INPUT IN W (TOLL. +5 1 -10%) MAIN OVEN NOMINAL ELECTRICAL INPUT IN W (TOLL. +5 1 -10%) 30 Instruction manual 0249 Please keep this instruction manual for future reference Top outside heating element Top inside heating element Bottom heating element Light Maximum electrical input Top outside heating element Top inside heating element Circle heating element Bottom heating element Fan Light Maximum electrical input 750W 1 ooow 1050W 15/25W 1820W/230V I OOOW 1900W 2100W 1200W 25W 15/25W 2950W/230V
****** Page 31 ****** Please keep this instruction manual for future reference Instruction manual 0249 31
****** Page 32 ****** € caple Caple Service Fourth Way Avonmouth Bristol BSII 8DW T: 0117 938 1900 E: service@caple.co.uk caple.co.uk
FREE ENGLISH PDF
OPERATING INSTRUCTIONS
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL