Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** CKIOB Cable Kit, IO-Foot Description The CKIOB is a 10-foot long Cable Kit. The kit can be used either as a main suspension drop cable or as a safety cable. Contents 10-foot long Cable w/ fixed loop, Cable Clamp, Instruction Sheet. Installation The cable can be secured to the speaker and the building structure in a variety of ways. Below are three common approaches. The support structure MUST be able to support 1 00 lbs. to provide adequate safety margin. The CKI 0B has a working load limit of 50 lbs. This working load limit is the maximum load which should ever be applied to this product at any time. WARNING IN NO EVENT SHOULD THE WORKING LOAD LIMIT BE EXCEEDED. FAILURE TO FOLLOW THIS INSTRUCTION MAY RESULT IN PROPERTY DAMAGE, INJURY OR DEATH, AND LEGAL LIABILITY TO YOU AND YOUR COMPANY. SUPPORT STRUCTURE FIXED LOOP CABLE CLAMP FIXED LOOP CABLE CLAMP EYEBOLT SPACER NUT Safety Cable for Pendant (Primary Suspension Cables not shown) Thread Spacer Nut completely on to Eyebolt, then thread the Eyebolt into Safety Point. Tighten securely (but do not over-tighten). Pendant Drop Cable Note CLAMP IMPORTANT: For Vinyl-coated Cable, you must strip away the coating in the area where the Cable Clamp will be applied so that the clamp makes contact to the EXPOSED wire core of the cable. WIRE CORE CAUTION VINYL COATING CABLE CLAMPS MUST BE SECURELY TIGHTENED. FAILURE TO DO SO MAY RESULT IN PROPERTY DAMAGE, INJURY OR DEATH, AND LEGAL LIABILITY TO YOU AND YOUR BUSINESS. Specifications subject to change without notice. 0 2016 Bogen Communications, Inc. 54-2094-03D 1701 BOGEN@ COMMUNICATIONS, INC. bogen.com
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL