Free English BLUSTREAM CAT100EARC (01) PDF Document. Free English BLUSTREAM CAT100EARC (01) PDF User Guide. Free English BLUSTREAM CAT100EARC (01) PDF User Manual. Free English BLUSTREAM CAT100EARC (01) PDF Owner Guide. Free English BLUSTREAM CAT100EARC (01) PDF Owner Manual. Free English BLUSTREAM CAT100EARC (01) PDF Reference Guide. Free English BLUSTREAM CAT100EARC (01) PDF Instruction Guide. Free English BLUSTREAM CAT100EARC (01) PDF Reference Manual. Free English BLUSTREAM CAT100EARC (01) PDF Instruction Manual. Free English BLUSTREAM CAT100EARC (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD BLUSTREAM CAT100EARC (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the audio capabilities of the eARC connection on the BLUSTREAM CAT100EARC?
The eARC connection on the BLUSTREAM CAT100EARC supports uncompressed 7.1ch audio content, including high bitrate and object-based content such as Dolby Atmos and DTS:X.
What audio formats does the Optical S/PDIF connection support on the BLUSTREAM CAT100EARC?
The Optical/SPDIF connection on the BLUSTREAM CAT100EARC supports compressed 5.1 audio formats, such as Dolby Digital and DTS Surround.
How do I connect a 4K display and an AVR for eARC audio using the BLUSTREAM CAT100EARC?
To set up eARC audio with your BLUSTREAM CAT100EARC, follow this connection diagram:
1. Connect an HDMI cable from the eARC port of your 4K Display to the eARC/ARC IN port on the BLUSTREAM CAT100EARC TX unit.
2. Connect a CAT cable between the CAT OUT port on the TX unit and the CAT IN port on the RX unit.
3. Connect a second HDMI cable from the eARC/ARC OUT port on the RX unit to the eARC input on your AVR.
How can I connect my system for Optical S/PDIF audio using the BLUSTREAM CAT100EARC?
To use the Optical S/PDIF connection with your BLUSTREAM CAT100EARC, follow these steps:
1. Connect an Optical Digital cable from the Optical S/PDIF output on your 4K Display to the OPT IN port on the BLUSTREAM CAT100EARC TX unit.
2. Connect a CAT cable between the CAT OUT port on the TX unit and the CAT IN port on the RX unit.
3. Connect a second Optical Digital cable from the OPT OUT port on the RX unit to an optical input on your AVR.
What is the maximum transmission distance for audio signals with the BLUSTREAM CAT100EARC?
The BLUSTREAM CAT100EARC supports the following maximum transmission distances over a CAT cable:
eARC/ARC: max 100m
Optical S/PDIF: max 200m
How do I get analogue audio output from the BLUSTREAM CAT100EARC?
To get analogue audio, connect an analogue audio cable from the L/R OUT port on the BLUSTREAM CAT100EARC RX unit to an analogue audio input on a device like an amplifier. This provides a maximum of 2ch stereo audio and is not downmixed from a multichannel source.
What do the different colored lines in the BLUSTREAM CAT100EARC example schematic represent?
The cable types in the BLUSTREAM CAT100EARC schematic are color-coded as follows:
CAT: Dark Blue
HDMI: Orange
Optical Digital: Light Blue
Analogue Audio: Green
Speaker Cable: Purple
CLICK HERE TO DOWNLOAD BLUSTREAM CAT100EARC (01) PDF DOCUMENT