FREE ENGLISH BLOW RA3 (01) PDF DOCUMENT.
FREE ENGLISH BLOW RA3 (01) PDF USER GUIDE.
FREE ENGLISH BLOW RA3 (01) PDF USER MANUAL.
FREE ENGLISH BLOW RA3 (01) PDF OWNER GUIDE.
FREE ENGLISH BLOW RA3 (01) PDF OWNER MANUAL.
FREE ENGLISH BLOW RA3 (01) PDF REFERENCE GUIDE.
FREE ENGLISH BLOW RA3 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH BLOW RA3 (01) PDF REFERENCE MANUAL.
FREE ENGLISH BLOW RA3 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH BLOW RA3 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD BLOW RA3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the different parts of the BLOW RA3 radio?
The parts of the BLOW RA3 are as follows:
1. Tuning knob
2. Function band selector
3. Volume control
4. DC jack
5. AC socket
6. Antenna
The MP3 player section includes buttons for Mode (M), Previous track, Play/Pause, and Next track, along with a USB port and a TF (Micro SD) card slot.
How do I power the BLOW RA3 using AC power?
To use AC power with your BLOW RA3, connect the AC power cord to the AC power input on the device, then connect the AC power cord plug to an AC outlet.
How do I install batteries in the BLOW RA3?
To power the BLOW RA3 with batteries, follow these steps:
1. Remove the AC power cord and remove the battery compartment cover.
2. Install 2x R20 cells into the battery compartment, strictly following the polarity markings illustrated in the battery compartment.
How do I turn the BLOW RA3 on or off?
Switch on the Power Switch on the BLOW RA3 before any operation.
How do I operate the radio on the BLOW RA3?
1. Set the band switch to the position for your desired radio station band (e.g., FM or AM).
2. Tune in your desired radio station with the tuning knob.
3. Adjust the volume control as desired.
Is there anything I should know about using the antenna on the BLOW RA3?
Yes. When listening to an FM (or SW – optional) broadcast, it is important to adjust the length of the Antenna in a strong signal area to improve reception.
How do I use the USB, SD card, and Bluetooth functions on the BLOW RA3?
Turn the function switch to the USB/SD/Bluetooth position. The BLOW RA3 will run the Bluetooth function first. To play music from a storage device, insert a USB drive or SD card into the radio, and it will play the songs.
What are the specifications for the BLOW RA3?
Tuning: Analogue AM / FM tuning (AM 530-1600 kHz, FM 87.5 – 108 MHz)
Speaker: 2.5 inch speaker with excellent sound quality
Antenna: Telescopic antenna
Connectivity: Bluetooth, USB port, Micro SD card port
Power: AC 230V/50Hz, DC: 3V (2xR20 batteries)
What precautions should I take when using the BLOW RA3?
1. For AC power, make sure the voltage is compatible. Always use the supplied AC power cord; never use another AC power cord.
2. Always unplug the AC power cord from the AC power source when it is not being used or when the DC power supply is operating.
3. Do not expose the device to extreme temperatures or high humidity to ensure normal operation for a long time.
4. Under no circumstances should you place the device in bathing areas or near stoves and heaters.
What should I do if my BLOW RA3 is not working properly?
If you notice that the BLOW RA3 is not working properly, take it to the nearest service center. Do not try to repair it yourself.
What are the safety warnings for the BLOW RA3?
To avoid the risk of fire or electric shock, do not expose the BLOW RA3 to rain or moisture.
To avoid electric shock, do not open the casing. Contact a service center or a qualified technician.
CLICK HERE TO DOWNLOAD BLOW RA3 (01) PDF DOCUMENT