FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF USER GUIDE
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF USER MANUAL
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF OWNER GUIDE
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF OWNER MANUAL
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF REFERENCE GUIDE
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF REFERENCE MANUAL
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BLITZWOLF BW-CML3 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BLITZWOLF BW-CML3 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the parts of the device?
1. Mini Remote Control
2. Lamp Pole
3. White & Warm LED Bead
4. RGB LED Bead
5. Fixed Holder
6. Collapsible alloy stand
7. Type-C Port
What is included in the package?
Monitor Light X1, Remote Control X1, USB To Type-C Cable X1, User manual X1
What are the product specifications?
| Model | BW-CML3 |
| Material | Aluminum+ABS+PC |
| Input | DC5V/1A |
| Rate Power | 5W |
| Curvature | R1000 |
| CRI | >97 |
| LED Color | 2900-6000K+RGB |
| LED Quantities | 100pcs SMD2835 + 40pcs SMD5050 |
| White Brightness | 500lx |
| Ambient Mode | 2 Kinds+Music Sync |
| Control Way | 2.4GHz RF Control |
| Product Size | 550*145*30mm |
| Remote Control Size | Φ45x27mm |
| Product Weight | 515g |
How do I install the monitor light?
Rotate the clip and place it firmly on the monitor or computer, then connect the power cable to the monitor light and power adapter, and plug the power adapter into a wall socket. When the lamp is first powered on, the white light and RGB light will turn on at the same time.
How do I set up the remote control?
Hold the bottom of the remote control with one hand, press the bottom anti-slip pad with the other hand, and turn it counterclockwise to open the back cover of the remote control. Remove the insulating gasket and close the back cover, then turn it clockwise to lock the back cover in place.
How do I operate and pair the remote control with the light?
Plug in the power again and then press and hold the remote control for a few seconds. When the RGB light slowly flashes 3 times, it means that the remote control is paired successfully. If you want to cancel the pairing, unplug the power off, plug it back in, power off, and plug it in again. The RGB light will flash 3 times to unpair.
How do I adjust the white light settings?
Short press: Turn on/off
Turn clockwise: Increase brightness
Turn anti-clockwise: Decrease brightness
Press + Turn clockwise: Increase color temperature
Press + Turn anti-clockwise: Decrease color temperature
How do I control the RGB ambient light?
Long Press: Turn top ambient light on/off
Double-click: Switch top ambient light mode
How do I switch between ambient light modes and what are they?
Double-click to cycle through the effects of the ambient light, which has three modes:
1. Colorful gradient
2. Colorful + breathing flashing gradient
3. Sound pick-up colorful light effect
When the remote is switched to the music sensing mode, the RGB colorful light will go out if there is no sound, and the marquee light effect will only appear if there is sound sensing in the surroundings.
Are there any tips for using the light?
1. The default setting memorizes the ambient light effect mode used before turning off the light the last time.
2. After a normal shutdown or an unexpected shutdown, the lamp will enter the mode used before the shutdown by default.
What precautions should I take when using this product?
1. It is recommended to use with a 5V/2A adapter for a better experience.
2. This product can be applied to flat or curved displays with a thickness of 0-45mm.
CLICK HERE TO DOWNLOAD BLITZWOLF BW-CML3 (01) PDF MANUAL