FREE ENGLISH BINTEC W2044AX (01) PDF USER GUIDE
FREE ENGLISH BINTEC W2044AX (01) PDF USER MANUAL
FREE ENGLISH BINTEC W2044AX (01) PDF OWNER GUIDE
FREE ENGLISH BINTEC W2044AX (01) PDF OWNER MANUAL
FREE ENGLISH BINTEC W2044AX (01) PDF REFERENCE GUIDE
FREE ENGLISH BINTEC W2044AX (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BINTEC W2044AX (01) PDF REFERENCE MANUAL
FREE ENGLISH BINTEC W2044AX (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BINTEC W2044AX (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BINTEC W2044AX (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How can I configure the bintec access point?
In its ex-works state, your device acts as a DHCP client and dynamically has an IP address assigned if you are operating a DHCP server within your network. If that is not the case, directly connect your device to the configuration PC and log in. You can take your access point into operation in a number of different ways:
Wireless LAN Controller: You can take the access point into operation with the wizard-supported WLAN Controller. The number of access points you can manage through the WLAN Controller as well as information on the required licenses can be found in the data sheet of your device. Managing the internal WLAN of your device does not require a separate license. Upon starting the WLAN Controller Wizard you will receive instructions and explanations on the individual pages of the wizard. Note that taking the WLAN Controller into operation disables the menu WLAN. All WLAN configuration is now done using the WLAN Controller.
be.SDx: be.SDx allows you to manage access points comfortably. If this cloud solution is interesting for you, please contact the provider.
WLAN menus: You can also configure your access point using the traditional WLAN menus of the graphical user interface.
What are the default login credentials and IP address for the access point?
IP address: 192.168.0.252
User name: admin
Password: admin
What is included with the bintec W2022ax/W2044ax?
bintec W2022ax/W2044ax
Dowels and screws for wall mounting
Installation poster
Security information
What are the dimensions and wall mounting specifications?
The access points have the following dimensions (W x H x D): 216 x 216 x 51 mm.
The drilling holes for wall mounting have the following spacing: 116 mm.
What do the LED indicators on the access point mean?
| LED | Status | Color | Information |
|---|---|---|---|
| STATUS | off | No power supply connected. Error if other LEDs are lit. | |
| on (flashing) | green | Normal operation | |
| on (static) | red | Failure | |
| on (flashing) | red | Management communication error | |
| LAN | off | No LAN | |
| on (static) | red | 100 Mbit/s active | |
| on (flashing) | red | 100 Mbit/s data traffic | |
| on (static) | yellow | 1000 Mbit/s active | |
| on (flashing) | yellow | 1000 Mbit/s data traffic | |
| on (static) | green | 2500 Mbit/s active | |
| on (flashing) | green | 2500 Mbit/s data traffic | |
| WLAN 1/2 | off | Radio module and/or all assigned SSIDs deactivated | |
| on (slow blinking) | green | SSID active, no client is connected | |
| on (fast blinking) | green | SSID active, one or more clients authenticated | |
| on (flashing) | green | SSID active, one or more clients authenticated and data traffic |
How can I power the W2022ax and W2044ax devices?
W2022ax and W2044ax are supplied without a power supply. If you wish to power the units via PoE, use a 28 watt 802.3at PoE injector for W2044ax. For W2022ax a PoE injector according to 802.3af is sufficient.
If you do not use Power over Ethernet, only use a power supply which is defined under equipment.
How do I reset the access point to factory settings?
You can reset the access point to the ex-works state in either of two ways:
1. In the menu Maintenance > Factory Reset.
2. Through the reset button located at the side of the device. Press the button until all LEDs are off, except for the status LED that remains on.
Both methods delete all configurations and passwords.
What optional equipment is available for the access point?
Ceiling mounting (part number: 5520000163)
Power supply with changeable plug adapter (part number: 5999027522)
What are the connectors on the device?
1. Connector for power supply (DC)
2. 100/1000/2500 Base-T Ethernet interface (LAN (POE))
What type of antennas do the W2022ax and W2044ax use?
The bintec W2022ax and W2044ax are equipped with integrated antennas.
CLICK HERE TO DOWNLOAD BINTEC W2044AX (01) PDF MANUAL