Click here to download B-AIR GRIZZLY GP-1-ETL (01) PDF MANUAL
PDF Content Summary:
****** Page 1 ****** OPERATION SAFETY SERVICE WARRANTY CONTACT SPECIFICATIONS TROUBLESHOOTING Grizzly GP-I-ETL Instruction Manual Intertek
****** Page 2 ****** THANK YOU FOR PURCHASING A B-AIR PRODUCT. Introduction to Grizzly GP-I-ETL Your new Grizzly B-Air GP-I-ETL blower and dryer has a Ihp high efficency motor with the following features: • State of the art construction • Safety screens on open vents • Easy to use carrying handle • “Kic* Stand” allows for added height when • 3 speed switch Operation/Use This high air vdume blower iS intended to dry, inflate, and move air. It is suitable for a variety of applications. A) Carefully place the Grizzly B-Air unit on a stable flat dry surface during operation. B) use free standing or with attachments 1 ) The Grizzly B-Air unit (2n positioned to aim airflow across fiat surfaces or angled upward, Raise or lower attached stand for height adjustment 2) Pet Drying — attach the den drying kit for multiple cage drying- 3) Inflatables — attach an inflatable tube around the exhaust opening using straps, velcro, or any other form of C) Turn on the switch to desired speed and make sure it is operating correctly. D) All blowers/dryers in operation must be supervised at all times. 3 SPEEO MAIN SWITCH CARRYING ANOLE AIR INTAKE AIR OUTLET KICK STAND Warning All blowers in operation must be supervised and attended at all times, the use of a 3-prong to 2-prong adapter is prohibited- only use a 2-prong to 2-prong adapter. If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified in order to avoid a hazard.
****** Page 3 ****** Storage Store unit indoors in a clean dry environment to ensure long life Safety 1) 2) 3) 4) 5) 6) 7) 8) 9) Keep children and pets away frorn unit while in operation and/or plugged in. Do not put fingers or other objects in unit while in operation and/or plugged in. To avoid electric shock do not operate in pooled water. IJnit must te kept dry at all times, including motor, wiring and exterior If unit becomes wet, thoroughly dry before next operation. Indoor use: use only with a plug and/or extension cord to avoid riSk of electrical shock or fire. Remember never to Lise a cord with any kind of damage or wear. Make sure the power source is sufficient to meet the requirements of the dryer / air To prevent overheating the unit keep air intakes at all times. Clogging or blocking the air intakes could result in a fire or electrical hazard. In order to prevent injury do not rernove any screens or safety guards from the unit and to avoid objects from coming in contact with the dryer’s wheel, Unit damage in this manrerwill void your warranty 1 0) Do not operate unit close to any dangerous areas, such as explosive gases, flammables. heaters and unventilated environments, which may result in explosions or electrical hazards. 11) Do not use any form of speed control device as doing so may cause injury or fire. 12) Always place drF / air mover on a smooth and Eveled surface for safe opera tion. 13) Do not use unit if damaged 14) Before cleaning or unplug unfl- 1 5) All dryers f air movers in operation must be supervised at all times. 16) Do not expose to rain, water or snow- 1 7) IJnit must be nnnected to a GFCI (ground fault circuit interrupter) protected receptacle, Warning! All dryers I air movers in operation must be supervised and attended at all times. The use of a 3-prong to 2-prong adapter is prohibited. Only use a 2-prong to 2-prong adapter. If the power supply cord is damaged, it newst be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard, Limited Warranty Proof of purchase is required on all warranty claims. I Year Warranty: B-air will cover all parts (except power cord) within one year of purchase b-air will pay repair costs and one way ups ground shipping to your location within the 48 contiguous states. of purchase is required, Customer is responsibE for shipment of damaged unit to b-air warehouse for repair. Canada and non-contiguous states must pay freight both ways.
****** Page 4 ****** 5 Year Warranty: B-air will cover housing from date of original purchase. Proof of purchase is required. Grizzly B-Air Limited Warranty Covers I) Grizzly a-Air dryers I air nwgeers are covered against defects in material and used under normal intended use to original purchaser for a term of (1 ) one-year from the original date of purchase including parts. labor and shipping- 2) Grizzly b-air dryer/ air movers housing is covered for a term of (5) five full years from the date of the original purchase. Does not cover Any signs of misuse induding, but not limited to rough handling, abuse, tam- pering, improper voltage use, and unauthorized maintenance and repairs. Service In order to receive service or replaæment parts under warranty, you must: I ) Call for a RMA# (return authorization number) 2) Have proof of purchase 3) Ship to a-Air blower • If immediate service is b-air will ship a dryer / air mover immediately to replace the one requiring service provided a valid credit card is provided and charged. once we receive your dryer / air rrwver, we will credit your credit card account • We will gladly repair your drv I air rnover and ship within 24 hours. Upon inspection, we will advise you of repairs needed and the cost (if appli- cable). B-Air will issue repair or replacement parts depending on warranty, Cords 1) 2) 3) 4) Do not use extension cords for outskie use. Use 3 prong adaptors that are UL and CE approved and not less than 14-3 with ground fault circuit interrupter (GFCI), Do not use cords that show any kind orwear or damage. Cords are not covered by warranty,
****** Page 5 ****** D —–xl •a al.r L.—xl —–xl —–xl —-x8 —–x2 —–xl A. B. C. D. E. F. G. H. l. J. K. L. M. N. O. P. Q. R. S. T. U. V. W. X. Housing Motor Fan Air Exhaust Grill Air Intake Grill (M) -— Air Intake Grill (F) — Power Cord Air Guide Blade Capacitor Fastener Clip Switch Switch Knob Switch Cover Rivet 4x16mm Rivet 5x19mm Screw 3x10mm Screw 4x16mm Screw 4x12mm Screw 6x16mm Rack Feet Rack Tube Cord Connector Position Rack Rubber Feet —x 13
****** Page 6 ****** Explosion of Grizzly GP-I -ETL Troubleshooting PROBLEM Motor Not Running Scraping Noise From Blower Weak Air Flow Specifications POSSIBLE CAUSE a) Switch is OFF b) Bad Outlet c) Faulty SwitchfCord a) Wheel Out Of Line a) Obstructed Vents•lnlets SOLUTION a) Turn Switch ON b) Check Outlet/’ Change to Another Outlet c) Call Factory for new Switch/R lace Cord a) Call Factory for R lacement Advise a) Clean Out Vents/lnlets VOLTS MAX AIR V(hUME S’TA1tC PRESSUkE SPEED MOTOR SPE•ætiS s r,hNLj CFM Y*’GLBS
****** Page 7 ****** WARRANTY REGISTERATION Please and rnail or fax for your pccxiuct warranty, fu a L.nits. *ase •t serial nun-&rs on a separate sheet THIS WARRANTY CARO ANO YOUR I OF SALE MUST BE PRESENTED FOR WARRANTY SERVICE. Your Company Name Contact Name Address City Phone E-mail GRIZZLY GP-I-ETL Serial Number Purchased From Additional ConnmentsiSuggestions Title Zip Date of Purchase ‘BAR a-Air 550 South AyonAve. Azusa, CA 91702 1877-800-2247 (BAIR) Fax: (626) 385-3307 Email: firstname.lastname@example.org Web site: b-air.com
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL