AXLOIE GOIN G2 (01) PDF MANUAL

The package includes the following items:

2 x Wireless Earphones

1 x Charging Case

3 x Pairs of Ear Caps (S/M/L)

1 x USB Cable

1 x User Manual

The main components are:

LED Indicator of Earphone / Multi-function Button

Charging Case

LED Indicator of Charging Case

Micro USB Charging Port

1. Fully charge the charging case first.

2. Choose the ear tips that provide the most comfortable and secure fit for your ears.

1. Take out the earphones from the charging case. They will automatically power on; to do this manually, press and hold the multi-function button of both earphones for 2 seconds.

2. Once powered on, the LED indicator of the main earphone will flash red and blue alternately, and the LED of the secondary earphone will be off. A voice prompt will announce “Pairing”.

3. On your phone, search for “AIKULIN G02” in the Bluetooth device list and select it to connect. Once connected, a voice prompt will announce “Connected”.

1. Take out a single earphone from the charging case. To power it on manually, press and hold the Multi-Function Button (MFB) for 2 seconds.

2. Double-click the MFB. A voice prompt will announce “Pairing”, and the LED indicator will flash red and blue alternately.

3. On your phone, search for “AIKULIN G02” in the Bluetooth device list and select it to connect. Once connected, a voice prompt will announce “Connected”.

To switch to mono mode while in binaural mode (using both earphones): Simply put one of the earphones into the charging case and close the lid.

To switch to binaural mode while in mono mode (using one earphone): Simply open the charging case and take out the other earphone.

1. Delete “AIKULIN G02” from the Bluetooth list on your phone and turn off your phone’s Bluetooth setting.

2. Turn off the earphones: Press and hold the Multi-Function Button (MFB) on the earphones for 5 seconds. The LED indicator will flash red for 1 second, and a voice prompt will announce “Power off”.

3. Place the earphones back into the charging case and close the lid. The reset process is now complete.

4. If the reset attempt fails, repeat the three steps above.

The controls for music and calls are as follows:

Earphones LED Status:

Charging Case LED Status:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

This product is marked with the WEEE symbol (2012/19/EU), indicating it cannot be disposed of as unsorted municipal waste in the European Union.

For proper recycling, you should return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.