Free English AVIDSEN 103622 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD AVIDSEN 103622 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the AVIDSEN 103622?
The technical specifications for the AVIDSEN 103622 are as follows:
- Emergency light
- 1 LED light of 1W (lumens: 60-90 Lm)
- 12 SMD 5730 Leds (lumens: 300-350 Lm)
- Power supply 220-240V 50/60Hz
- Rechargeable Lithium battery included: 3.7V-4400 mAh
- Operation time: LEDs 6 hours – Flashlight 15 hours
- Recharge time: 15 hours (in case of fully discharged battery)
- Weight: 390 g
- Dimensions: 261x151x70 mm
- USB inlet to recharge Smartphones and Tablets
How do I use the AVIDSEN 103622 for the first time?
Please charge the AVIDSEN 103622 for 8 hours before the first usage.
How do I know the AVIDSEN 103622 is charging?
The red LED turns on when the AVIDSEN 103622 is connected to a power socket.
How do I use the AVIDSEN 103622 as a portable light?
When the battery is charged, you can disconnect the AVIDSEN 103622 from the socket and use it as a portable light. Choose mode ON1 for flashlight, and ON2 for ambient light.
How do I use the AVIDSEN 103622 in “emergency” mode?
If you use the AVIDSEN 103622 in “emergency” mode, just connect the power supply cord to an electrical socket and choose mode ON1 or ON2 according to your needs. The light automatically turns on in case of power outage and turns off when power is restored.
Can the AVIDSEN 103622 be used to charge external devices?
Yes, the AVIDSEN 103622 can be used as a portable battery to charge Smartphones and tablets through the USB port.
What are the components of the AVIDSEN 103622?
The components of the AVIDSEN 103622 are:
| 1 | T3 modes button: OFF, ON1, ON2 | 6 | LED |
| 2 | Handle | 7 | Cover fixing screws |
| 3 | Rechargeable battery | 8 | USB charger |
| 4 | Flashlight | 9 | Charge indicator |
| 5 | Transparent cover | 10 | Battery charger socket |
How should I clean and maintain the AVIDSEN 103622?
Maintenance instructions for the AVIDSEN 103622:
- Never use abrasive or corrosive substances to clean the light.
- Use a slightly damp soft cloth.
- Never spray anything onto the product as it may damage the internal workings.
- Fully recharge the battery for 24 hours before the first use.
- Recharge the battery after use or if the light dims.
- Recharge the battery at least once every 3 months.
- The device must always be recharged in a site sheltered from humidity.
- Do not expose to rain.
- Never open the casing to prevent electrical shock hazards.
- The light source of this luminaire is not replaceable; when the light source reaches the end of its life, the entire luminaire must be replaced.
- Do not allow children to operate the product.
CLICK HERE TO DOWNLOAD AVIDSEN 103622 (01) PDF DOCUMENT