Free English AVER SA-A5 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD AVER SA-A5 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What items are included in the package of the AVER SA-A5?
The package contents for the AVER SA-A5 include:
Streaming Audio Box
Power Adapter and Power Cord(s)
3.5 Stereo to 3.5 Stereo Cable (10m)
USB 3.0 Type-C to Type-A Cable (1.83m)
QR Code Card
Pendant Microphones
Lanyards (x2)
USB 3.0 Type-C to Type-A Cable (1.5m)
Microphone Receiver (Dongle)
Wall Mount Type Adapter
What are the physical dimensions of the AVER SA-A5 streaming audio box?
The dimensions of the AVER SA-A5 streaming audio box are:
Width: 210 mm (8.27 inches)
Depth: 110 mm (4.33 inches)
Height: 48 mm (1.89 inches) or 48.5 mm (excluding rubber)
What are the physical dimensions of the AVER SA-A5 pendant microphone?
The dimensions of the AVER SA-A5 pendant microphone (excluding clip) are:
Width: 33 mm (1.30 inches)
Depth: 20.2 mm (0.80 inches)
Height: 73.3 mm (2.89 inches)
How do you turn on or put the AVER SA-A5 streaming audio box into standby mode?
Short press the Power button on the front panel to power on the AVER SA-A5.
Long press the Power button for 5 seconds to enter Standby Mode.
What do the different Power button LED states indicate on the AVER SA-A5 streaming audio box?
Solid green: Power on
Flashing green: Start-up
Solid red: Wake-on-LAN mode (when connected to power)
Flashing red: Updating firmware or resetting to factory default
Solid orange: Input lock mode
What does the front panel Status LED indicate on the AVER SA-A5 streaming audio box?
Solid blue: Microphone(s) is paired
Off: Microphone(s) isn’t paired
What does the PC Mute button LED indicate on the front panel of the AVER SA-A5?
Solid red: PC is muted
Off: PC isn’t muted
Which controls and ports are located on the front panel of the AVER SA-A5 streaming audio box?
The front panel of the AVER SA-A5 streaming audio box features:
Power Button
Status LED
Microphone Receiver (Dongle) Slot and Plug
PC Mute Button
PC (USB Type-C) Port
Volume Controls for Assistive Listening Device (ALD), Mic In, Wireless Mic, and Speakers
Assistive Listening Device (ALD) Port
Mic In Port
Which controls and ports are located on the back panel of the AVER SA-A5 streaming audio box?
The back panel of the AVER SA-A5 streaming audio box features:
Volume Controls for USB Audio Class (UAC) and Line In
Ethernet Port
USB Type-A Port
Line In Port
Page Mute Port
Kensington Lock
Line Out Port
Speaker Push-in Terminal Connector Block
DC Power Jack
What are the controls and external features of the AVER SA-A5 pendant microphone?
The AVER SA-A5 pendant microphone includes:
Power/Mute Switch
Mic In Port
USB Type-C Port
Emergency Button (on Teacher Microphone)
Volume Up/Down Buttons
Battery LED
Status LED
Battery Door
Lanyard Hook
Microphone Clip
What do the Battery LED states indicate on the AVER SA-A5 pendant microphone?
When in use:
Solid green: Normal
Flashing red: Low battery
When charging:
Solid green: Fully charged
Solid red: Charging
What do the Status LED states indicate on the AVER SA-A5 pendant microphone?
Solid blue: Paired
Flashing blue: Not transmitting to a receiver or out of range
Solid red: Mute
Flashing red: Low battery or initiating an SOS Rescue (Teacher microphone)
What are the power requirements and connection specifications for the AVER SA-A5 streaming audio box?
The power cord must be connected to a socket-outlet with an earthing connection.
The unit is intended to be supplied by a UL Listed Certificate power adapter and power cord, with output complying with LPS or PS2, rated at 19Vdc, 3.42A minimum, and Tma 35 degrees C minimum.
How do you insert the microphone receiver dongle into the AVER SA-A5 streaming audio box?
Step 1. Remove the protective plug on the front panel of the AVER SA-A5 streaming audio box.
Step 2. Insert the microphone receiver dongle into the slot.
Step 3. Short press the Power button to turn on the streaming audio box.
Note: Hot-plugging may damage your device. Please plug in the receiver before powering on and unplug it after powering off.
How do you pair a pendant microphone with the AVER SA-A5 streaming audio box?
Step 1. Make sure you have inserted the microphone receiver dongle and turned on the AVER SA-A5 streaming audio box.
Step 2. Press and hold the Power/Mute button on the microphone for 3 seconds until you see a solid green light, then release the button to continue the pairing process.
Step 3. Pairing is successful when the status LEDs on both the microphone(s) and the AVER SA-A5 streaming audio box turn solid blue.
How should you wear and use the AVER SA-A5 pendant microphone for optimal audio quality?
Step 1. Tuck the lanyard through the hook and pull hard to secure the lanyard, then wear it around your neck.
Step 2. Adjust the lanyard to position the microphone approximately 15 cm (5.9 inches) from your mouth.
Step 3. Press and hold the Power/Mute button for 3 seconds to power on, press again to mute, or press and hold for 3 seconds to power off.
Step 4. Adjust the volume using the Volume Up/Down buttons located on the side of the microphone.
When does the AVER SA-A5 pendant microphone automatically shut off?
The AVER SA-A5 pendant microphone will automatically turn off under the following conditions:
When it is out of range and after 3 minutes of trying to connect.
After being muted for 30 minutes.
How does the emergency feature work on the AVER SA-A5 teacher pendant microphone?
The emergency feature is only available in the US.
Step 1. Connect the AVER SA-A5 streaming audio box to your local network using an Ethernet cable and the Device Management software.
Step 2. Press and hold the SOS button on the teacher microphone for 3 seconds to broadcast your location.
Step 3. Both the status LED and battery LED on the microphone will flash red.
Step 4. The microphone will continue to work normally after pressing the button.
How do you charge the AVER SA-A5 pendant microphone and how long does the battery last?
To charge the microphone, plug it into a power source using the included USB Type-C cable.
It takes less than 3 hours to fully charge the microphone.
The microphone provides 8 to 10 hours of talk time on a single full charge.
A quick 10 minutes of charging will provide approximately 1 hour of talk time.
How do you replace the battery in the AVER SA-A5 pendant microphone?
Step 1. Turn off the microphone. Loosen the screw on the back and open the battery door.
Step 2. Remove the battery by gently pulling up from the notch on the bottom.
Step 3. Insert the replacement battery, close the battery door, and tighten the screw securely.
Note: The battery should be replaced by its manufacturer, service technician, or a similarly qualified person.
How do you connect speakers to the AVER SA-A5 streaming audio box?
Step 1. Check the installation guide of your speakers to ensure they match the specifications of the AVER SA-A5 streaming audio box.
Step 2. Connect the speakers using standard speaker cables to the push-in terminal connector blocks on the back panel of the audio box.
Note: For optimal performance, connect the AVER SA-A5 to two 15W 6-ohm speakers. Maintain a speaker wiring impedance of 6 ohms when connecting existing speakers or retrofitting a classroom with four ceiling speakers.
How does the Page Mute function operate on the AVER SA-A5?
When the Page Mute input terminal on the rear of the AVER SA-A5 senses a strong enough signal, it will automatically mute all other audio input sources. This ensures that everyone can clearly hear emergency or general broadcasts originating from the Public Address (PA) system.
How do you connect an Assistive Listening Device (ALD) to the AVER SA-A5?
Step 1. Turn the ALD volume control knob all the way down on the front panel of the AVER SA-A5 streaming audio box.
Step 2. Plug your ALD transmitter into the ALD port on the front panel of the audio box using the included 3.5mm to 3.5mm stereo cable.
Step 3. Speak into the microphone and slowly turn the ALD volume control up until a suitable audio level is reached.
How can you connect a wired microphone to the AVER SA-A5?
You can connect a wired microphone using either of two methods with the AVER SA-A5:
Method 1: Plug the wired microphone into the Mic In port located on the side of a paired AVER SA-A5 pendant microphone.
Method 2: Plug the wired microphone directly into the 3.5mm Mic In port on the front panel of the AVER SA-A5 streaming audio box.
How do you set up the AVER SA-A5 for hybrid learning with a laptop?
Step 1. Short press the Power button to turn on the AVER SA-A5 streaming audio box, and pair your pendant microphone by pressing and holding its Power/Switch button for 3 seconds.
Step 2. Connect the laptop to the PC port on the front panel of the audio box using the included USB Type-C to Type-A cable. A slight popping sound during connection is normal.
Step 3. Open your video conferencing software (such as Google Meet, Skype, Microsoft Teams, or Zoom) and select the device corresponding to the AVER SA-A5 as your microphone and speaker source.
Step 4. When using your pendant or wired microphone, ensure your USB camera’s built-in microphone (if any) is turned off to prevent audio feedback.
How does the PC Mute button work during hybrid learning on the AVER SA-A5?
Press the PC Mute button on the front panel to mute the PC speakers and incoming audio from online students, thereby reducing distractions in the classroom. Online students will still be able to hear you speak through the AVER SA-A5 microphone.
What are the actions and functions of the top cover sound adjustment buttons on the AVER SA-A5?
| Button / Control | Action | Function |
|---|---|---|
| Mute Speaker | Press and release | Mute the whole Audio System. |
| Volume Down | Short press | Lower volume in steps. |
| Volume Down | Long press | Lower volume continuously. |
| Volume Up | Short press | Raise the volume in steps. |
| Volume Up | Long press | Raise the volume continuously. |
| Lock / Unlock | Press and release | Lock / unlock current volume settings, except wireless microphone (RX) input. |
| RESET | Press and hold (10 seconds) | Reset to factory default settings. |
How do you find the IP address and access the web application of the AVER SA-A5?
Step 1. Connect the AVER SA-A5 streaming audio box to its power adapter and to the local network using an Ethernet cable.
Step 2. Open the camera IP searching utility application on your computer.
Step 3. Click Search to view all available devices detected on the network.
Step 4. Select the AVER SA-A5 streaming audio box from the device list to display its network settings.
Step 5. Double-click on the IPv4 Address field to automatically open the web application interface in your internet browser.
What are the default login credentials for the AVER SA-A5 web application?
The default login credentials for the AVER SA-A5 web application are:
Username: admin
Password: admin
What is required upon logging into the AVER SA-A5 web application for the first time?
Step 1. Log in using the default Username and Password (admin / admin).
Step 2. The system prompts you to create and confirm a new Username and Password.
Step 3. Read the anonymous usage data policy, check the agreement box, and click Done.
Step 4. Log in using the newly created credentials to enter the main page.
What options are available on the Device Status page of the AVER SA-A5 web application?
Export Logs: Click to download logs of the current settings to your local computer.
Reboot: Click to restart the streaming audio box, confirm with OK, and refresh/re-login once rebooting completes.
Microphone Status: Displays connection status (Connected / Not Connected) and remaining battery levels for MIC 01 and MIC 02.
What do the microphone battery level icons represent in the AVER SA-A5 web application?
| Battery Indicator | Status |
|---|---|
| 4 Green Bars | Full battery |
| 2 to 3 Green Bars | Remaining battery |
| 1 Red Bar | Low battery |
| Empty Grey Outline | Out of battery |
What settings can be configured under Audio Out in the AVER SA-A5 web interface?
The Audio Out settings for the AVER SA-A5 include:
Page Mute: Toggle switch to enable or disable the public amplifier mute function.
Master Knob Control: Volume slider, Max Volume Setting option to limit the adjustment range, and a Mute toggle switch.
Headphone Out: Volume slider, Max Volume Setting option, and a Mute toggle switch.
Reset: Button to restore all Audio Out parameters to factory default values.
What settings can be configured under Audio In in the AVER SA-A5 web interface?
The Audio In settings for the AVER SA-A5 include:
Input Lock: Toggle switch to lock or unlock input settings. When enabled, MIC in, UAC, and Line in values cannot be modified.
Wireless MIC: Volume slider, Max Volume Setting button, and Mute toggle.
MIC In: Volume slider, Max Volume Setting button, and Mute toggle.
UAC: Volume slider, Max Volume Setting button, and Mute toggle.
Line In: Volume slider, Max Volume Setting button, and Mute toggle.
Reset: Button to revert all Audio In settings to factory defaults.
How do you configure network settings on the AVER SA-A5 via its web application?
Under Network Settings in the AVER SA-A5 interface:
DHCP: Use the toggle switch to select DHCP (automatic IP assignment) or Static IP.
Static IP setup: Turn off the DHCP toggle switch, manually enter the IP Address, Netmask, Gateway, and DNS values, and click Confirm.
Hostname: Enter a new Hostname in the text box and click Confirm.
How do you enable and configure HTTPS on the AVER SA-A5?
Step 1. Click the HTTPS toggle switch under Network Settings to turn on secure browser connections to the AVER SA-A5.
Step 2. Create an SSL certificate file for encryption and decryption.
Step 3. Under the Upload Certificate field, click Choose File and select your SSL certificate file.
Step 4. Click Upload to apply the certificate.
What information is shown in the System section of the AVER SA-A5 web interface?
The System section displays:
Model Name
Serial Number
IP Address
MAC Address
Firmware Version
How do you perform a firmware upgrade on the AVER SA-A5 using the web application?
Step 1. Obtain the firmware update file and save it to your computer.
Step 2. Navigate to the System tab in the AVER SA-A5 web application.
Step 3. In the Upgrade firmware section, click Choose File and select the firmware update file.
Step 4. Click Upgrade to start updating the device firmware.
How do you change the login username or password for the AVER SA-A5?
In the System section of the AVER SA-A5 web application:
To change the username: Enter the new username in the Username text box under Account and click Change.
To change the password: Enter the new password in the Password text box under Account and click Change.
How can you reset the AVER SA-A5 to factory default settings?
The AVER SA-A5 can be reset to factory defaults using either of the following methods:
Method 1: Press and hold the RESET button on the top cover of the streaming audio box for 10 seconds.
Method 2: In the System menu of the web interface, click the Reset To Factory Default button.
What are the electrical and mechanical specifications of the AVER SA-A5 streaming audio box?
| Parameter | Specification |
|---|---|
| DC Power | 19V |
| Standby Mode Power Consumption | <1.5W (Wake-on-LAN) |
| Maximum Power Consumption | 65W max. |
| Dimensions (W x D x H) | 210 x 110 x 48.5 mm (excluding rubber) |
| Net Weight | 530 g ± 50 g |
What are the port specifications of the AVER SA-A5 streaming audio box?
| Port | Connector Type / Specification |
|---|---|
| PC Port | USB Type-C |
| ALD Port | 3.5mm stereo for assistive listening devices |
| Mic In Port | 3.5mm mono |
| UAC Port | USB Type-A 2.0 |
| Line In Port | 3.5mm stereo |
| Line Out Port | 3.5mm stereo |
| Speaker Out | 6-ohm speaker push-in terminal connector block |
| Ethernet Port | 1 RJ-45 port |
| DC Power Jack | 19V |
| Kensington Lock | 1 slot |
| Page Mute Port | 1 terminal block (10-100V) |
What are the specifications of the AVER SA-A5 pendant microphones?
| Feature | Teacher Microphone | Student Microphone |
|---|---|---|
| Style | Pendant with clip and lanyard | Pendant with clip and lanyard |
| Channels | 1 | 1 |
| Transmission Type | Wireless | Wireless |
| Wireless Frequency | 2.4 GHz | 2.4 GHz |
| Frequency Response | 50 Hz – 20 kHz | 50 Hz – 20 kHz |
| Coverage | 20 m (65 ft.) | 20 m (65 ft.) |
| Microphone Capsule | Omni-directional electret condenser | Omni-directional electret condenser |
| Battery Type | Rechargeable and removable Li-ion | Rechargeable and removable Li-ion |
| Battery Voltage | 3.7V | 3.7V |
| Talk Time | 8-10 hours | 8-10 hours |
| Charging Time | <3 hours | <3 hours |
| Charging Method / Port | USB Type-C | USB Type-C |
| Net Weight | 35 g | 35 g |
| Safety Alert | SOS button | N/A |
| Mic In Port | 3.5mm stereo | 3.5mm stereo |
| Power Rating | 5 VDC, 0.4A | 5 VDC, 0.4A |
What are the specifications of the AVER SA-A5 wireless receiver dongle?
| Parameter | Specification |
|---|---|
| Transmission Type | Wireless |
| Wireless Frequency | 2.4 GHz |
| Dimensions (W x D x H) | 55 x 30 x 10 mm |
| Power Rating | 5 VDC, 0.5A |
What are the environmental operating and storage specifications for the AVER SA-A5?
| Environment | Temperature | Relative Humidity (RH) |
|---|---|---|
| Working (Operating) | 0°C to 40°C | 10% to 90% |
| Storage | -30°C to 60°C | 10% to 90% |
What troubleshooting steps should be followed if the AVER SA-A5 microphone will not pair?
Step 1. Check that the AVER SA-A5 streaming audio box is turned on. A solid green or orange light on the Power button indicates it is powered on.
Step 2. Ensure that the streaming audio box is not placed in an enclosed space where wireless signals may be obstructed.
Step 3. Press and hold the Power/Mute button on the microphone for 3 seconds to turn it off, and then attempt the pairing process again.
What should you check if there is no sound or low volume from the AVER SA-A5 microphone?
Step 1. Check if the microphone is muted. A solid red light on top of the microphone indicates it is muted.
Step 2. Adjust the volume upward using the Volume Up button on the side of the microphone.
Step 3. Ensure the microphone is properly positioned approximately 15 cm (5.9 inches) from your mouth.
How do you resolve squealing or audio feedback with the AVER SA-A5?
Feedback (squealing) can be resolved by:
Lowering the volume using the Volume Down button on the side of the AVER SA-A5 microphone.
Moving the microphone further away from the speakers.
Disabling any built-in laptop or USB camera microphones when connected in a hybrid learning setup.
What troubleshooting steps should you take if there is no sound coming from the speakers connected to the AVER SA-A5?
Step 1. Verify that the AVER SA-A5 streaming audio box is turned on (indicated by a solid green or solid orange light on the Power button).
Step 2. Check if the streaming audio box is muted. If muted, press the Mute Speaker button on the top cover to unmute the system.
Step 3. Verify whether volume input is locked. If the Power button shows a solid orange light, press the Lock/Unlock button on the top cover to unlock input settings (the Power button LED will change to solid green), then increase the speaker volume.
What RF exposure guidelines apply to the wireless components of the AVER SA-A5?
For the AVER SA-A5 pendant microphones, the equipment complies with FCC and IC RSS-102 radiation exposure limits for uncontrolled environments, and users must follow operating instructions for RF compliance.
For the AVER SA-A5 microphone receiver dongle, the equipment complies with radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20 cm between the radiator and the human body.
CLICK HERE TO DOWNLOAD AVER SA-A5 (01) PDF DOCUMENT