FREE ENGLISH AVANTI BCA4499SSL (01) PDF USER GUIDE
FREE ENGLISH AVANTI BCA4499SSL (01) PDF USER MANUAL
FREE ENGLISH AVANTI BCA4499SSL (01) PDF OWNER GUIDE
FREE ENGLISH AVANTI BCA4499SSL (01) PDF OWNER MANUAL
FREE ENGLISH AVANTI BCA4499SSL (01) PDF REFERENCE GUIDE
FREE ENGLISH AVANTI BCA4499SSL (01) PDF INSTRUCTION GUIDE
FREE ENGLISH AVANTI BCA4499SSL (01) PDF REFERENCE MANUAL
FREE ENGLISH AVANTI BCA4499SSL (01) PDF INSTRUCTION MANUAL
FREE ENGLISH AVANTI BCA4499SSL (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD AVANTI BCA4499SSL (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
AVANTI BCA4499SSL (01) PDF SUMMARY:
Before the refrigerator is used, what must be done?
Before the refrigerator is used, it must be properly positioned and installed as described in the manual.
What type of outlet should you plug the refrigerator into?
Plug into a grounded 3-prong outlet.
What should you not do to the grounding prong?
Do not remove the grounding prong.
Should an adapter be used with the refrigerator?
Do not use an adapter.
Should an extension cord be used with the refrigerator?
Do not use an extension cord.
When should all panels be replaced?
Replace all panels before operating.
Is it recommended to have a separate circuit for the refrigerator?
Yes, it is recommended that a separate circuit, serving only your refrigerator, be provided.
What type of receptacles should be used with the refrigerator?
Use receptacles that cannot be turned off by a switch or pull chain.
What should you never clean refrigerator parts with?
Never clean refrigerator parts with flammable fluids.
Why should you not clean refrigerator parts with flammable fluids?
These fumes can create a fire hazard or explosion.
Should gasoline or other flammable vapors and liquids be stored in the vicinity of the refrigerator?
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Why should gasoline or other flammable vapors and liquids not be stored in the vicinity of the refrigerator?
The fumes can create a fire hazard or explosion.
When should you make sure the power line of the unit is disconnected?
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
Should you connect or disconnect the electrical plug when your hands are wet?
Do not connect or disconnect the electric plug when your hands are wet.
When should you unplug the refrigerator or disconnect power?
Unplug the refrigerator or disconnect power before cleaning or servicing.
What could be the result of not unplugging the refrigerator before cleaning or servicing it?
Failure to do so can result in electrical shock or death.
Should you attempt to repair or replace any part of the refrigerator?
Do not attempt to repair or replace any part of your refrigerator unless it is specifically recommended in this manual.
Who should handle servicing of the refrigerator, other than what is recommended in the manual?
All other servicing should be referred to a qualified technician.
How many people should be used to move and install the refrigerator?
Use two or more people to move and install the refrigerator.
What can result from failing to use two or more people to move and install the refrigerator?
Failure to do so can result in back or other injury.
How can you ensure proper ventilation for the refrigerator?
To ensure proper ventilation for your refrigerator, the front of the unit must be completely unobstructed.
What is the acceptable temperature range for the area where the refrigerator is installed?
Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C).
Where should this unit be installed?
This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
Where should the refrigerator not be located?
The refrigerator should not be located next to ovens, grills, or other sources of high heat.
How should the refrigerator be installed in regards to electrical, water and drain connections?
The refrigerator must be installed with all electrical, water and drain connections in accordance with state and local codes.
What type of electrical supply is required for the refrigerator?
A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
What should you not do to the power supply cord?
Do not kink or pinch the power supply cord of the refrigerator.
What size should the fuse (or circuit breaker) be?
The fuse (or circuit breaker) size should be 15 amperes.
Why is it important for the refrigerator to be leveled?
It is important for the refrigerator to be leveled in order to work properly.
How many adjustments may be needed to level the refrigerator?
You may need to make several adjustments to level it.
How should all installations be done?
All installation must be in accordance with local plumbing code requirements.
What should you make certain of during installation regarding the pipes?
Make certain that the pipes are not pinched, kinked or damaged during installation.
When should you check for leaks?
Check for leaks after connection.
Should children operate, play with, or crawl inside the refrigerator?
Never allow children to operate, play with, or crawl inside the refrigerator.
What should be done with the first batch of ice cubes?
Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.
What type of cleaning agents should not be used on the interior of the refrigerator?
Do not use solvent-based cleaning agents or abrasives on the interior.
Why should solvent-based cleaning agents or abrasives not be used on the interior of the refrigerator?
These cleaners may damage or discolor the interior.
What should this apparatus not be used for?
Do not use this apparatus for other than its intended purpose.
What should you do with this guide?
Read this guide carefully.
What is the purpose of the guide?
It is intended to help you operate and maintain your new beverage center properly.
Where should you keep the guide?
Keep it handy to answer your questions.
What should you do if you don’t understand something or need more assistance?
If you don’t understand something or you need more assistance, please call: Avanti Customer Service 800-220-5570
What should you keep with this guide?
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
Where can the model and serial numbers be found?
Write down the model and serial numbers. You’ll find them on a plate located on the rear outside wall of the beverage center.
When should you use the model and serial numbers?
Use these numbers in any correspondence or service calls concerning your beverage center.
Who should you contact immediately if you receive a damaged beverage center?
If you received a damaged beverage center, immediately contact the dealer (or builder) that sold you the beverage center.
What should you do before you call for service?
Save time and money. Before you call for service, check the Troubleshooting Guide.
What does the Troubleshooting Guide list?
It lists causes of minor operating problems that you can correct yourself.
Who should you contact first if you are not happy with the service you receive?
FIRST, contact the people who serviced your beverage center.
What should you do when you contact the people who serviced your beverage center?
Explain why you are not pleased.
What will likely happen when you explain why you are not pleased with the service?
In most cases, this will solve the problem.
What should you do if you are still not pleased after contacting the people who serviced your beverage center?
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to: Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 USA
What is this beverage center not designed for?
This beverage center is not designed for the storage of medicine or other medical products.
What are the parts and features of Models BCA4421WL and BCA4422BL?
- INTERIOR LIGHT
- TEMPERATURE CONTROL
- FULL WIRED SHELVES (2)
- GLASS CRISPER LID
- CRISPER
- LEVELING LEGS
- DOOR BINS
- CAN DISPENSER
- 2-LITER BOTTLE BIN
What are the parts and features of Model BCA4499SSL?
- DECORATIVE COUNTERTOP
- INTERIOR LIGHT
- TEMPERATURE CONTROL
- FULL GLASS SHELVES (2)
- GLASS CRISPER LID
- CRISPER
- LEVELING LEGS
- DOOR BINS (2)
- CAN DISPENSER
- 2-LITER BOTTLE BIN
What should you do before using the refrigerator?
Read all instructions before using the refrigerator.
Are child entrapment and suffocation problems of the past?
Child entrapment and suffocation are not problems of the past.
Are junked or abandoned appliances dangerous?
Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
What should you do before you throw away your old refrigerator?
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
Should children operate, play with, or crawl inside the appliance?
Never allow children to operate, play with, or crawl inside the appliance.
What should you never clean appliance parts with?
Never clean appliance parts with flammable fluids.
Why should appliance parts not be cleaned with flammable fluids?
The fumes can create a fire hazard or explosion.
Where should gasoline or any other flammable vapors and liquids not be stored?
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance.
Why should you not store gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance?
The fumes can create a fire hazard or explosion.
What should you do with the exterior and interior packing before using your appliance?
Remove the exterior and interior packing.
What should you check before using your appliance?
Check to be sure you have all of the following parts:
- 2 Full Wired Shelves for BCA4421WL and BCA4422BL
- 2 Full Glass Shelves for BCA4499SSL
- 2 Keys
- 1 Glass Crisper Lid
- 1 Crisper
- 1 Instruction Manual
How long should you let the unit stand upright before connecting it to the power source?
Before connecting the unit to the power source, let it stand upright for approximately 2 hours.
Why should you let the unit stand upright for two hours before connecting it to the power source?
This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
How should the interior surface be cleaned?
Clean the interior surface with lukewarm water using a soft cloth.
How is this appliance designed to be installed?
This appliance is designed to be free-standing installation only.
Should the appliance be recessed or built-in?
This appliance should not be recessed or built-in.
Where should you place the appliance?
Place your appliance on a floor that is strong enough to support it when it is fully loaded.
How do you level the appliance?
To level your appliance, adjust the front leveling legs at the bottom of the appliance.
Where should the appliance be located?
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Why should the appliance not be located in direct sunlight?
Direct sunlight may affect the acrylic coating.
Why should the appliance not be located near heat sources?
Heat sources may increase electrical consumption.
Can extreme cold ambient temperatures affect the unit?
Extreme cold ambient temperatures may also cause the unit not to perform properly.
Where should the unit not be located?
Avoid locating the unit in moist areas.
Where should the appliance be plugged into?
Plug the appliance into an exclusive, properly installed-grounded wall outlet.
Should you cut or remove the third (ground) prong from the power cord?
Do not under any circumstances cut or remove the third (ground) prong from the power cord.
Who should you direct any questions concerning power and/or grounding to?
Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
Why should this appliance be properly grounded?
This appliance should be properly grounded for your safety.
What is the power cord of this appliance equipped with?
The power cord of this appliance is equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of electrical shock.
Should you cut or remove the third ground prong from the power cord?
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
Why must this appliance be properly grounded?
For personal safety, this appliance must be properly grounded.
What does this appliance require?
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with a three-prong.
Who should check the wall outlet and circuit?
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
What is your responsibility when a standard 2-prong wall outlet is encountered?
When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
Where should the cord be secured?
The cord should be secured behind the appliance.
Why should the cord be secured behind the appliance?
This prevents accidental injury.
Should the cord be left exposed or dangling?
The cord should not be left exposed or dangling.
Where should the appliance always be plugged into?
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance.
Why should the appliance be plugged into its own individual electrical outlet?
This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating.
How should you never unplug the appliance?
Never unplug the appliance by pulling the power cord.
How should you unplug the appliance?
Always grip the plug firmly and pull straight out from the receptacle.
What should you do with all power cords that have become frayed or otherwise damaged?
Repair or replace immediately all power cords that have become frayed or otherwise damaged.
Should you use a cord that shows cracks or abrasion damage?
Do not use a cord that shows cracks or abrasion damage along its length or at either end.
What should you be careful not to damage when moving the appliance?
When moving the appliance, be careful not to damage the power cord.
Is it recommended to use an extension cord with this appliance?
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance.
What type of extension cord should be used if you must use one?
If you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
What could improper use of the grounded plug result in?
Improper use of the grounded plug can result in the risk of electrical shock.
Who should replace the power cord if it is damaged?
If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
What side does the door on this appliance open from?
This appliance has the capability of the door opening from either the left or right side.
What side does the door open from upon delivery?
The unit is delivered to you with the door opening from the left side.
Who should you call if you want to reverse the door swing?
Should you desire to reverse the opening direction, please call service for reversal instructions.
How do you set the temperature control?
To control the internal temperature, adjust the temperature control according to the ambient temperature or purpose of use. The temperature control is located on the upper right-hand side of the compartment. The first time you turn the unit on, set the temperature control to “6”. The range of the temperature control is from position "OFF” to “6”. After 24 hours, adjust the temperature control to the setting that best suits your needs. The setting of “4” should be appropriate for home or office use.
How do you turn the unit off?
Turn the temperature control to "OFF”.
Does turning the temperature control to “OFF” position shut off the power to the appliance?
No. Turning the temperature control to “OFF” position stops the cooling cycle but does not shut off the power to the appliance.
If the unit is unplugged, power is lost, or is turned off, how long must you wait before restarting the unit?
You must wait 3 to 5 minutes before restarting the unit.
What happens if you attempt to restart before the time delay?
The appliance will not start.
When does the interior light turn ON and OFF?
When you open the door, the light will be ON automatically. When you close the door the light will turn OFF automatically.
Is the unit provided with a lock and key combination?
Yes.
Where are the keys located?
The keys are located inside the plastic bag that contains the User’s Guide.
How do you unlock the door?
Insert the key into the lock and turn it counterclockwise to unlock the door.
How do you lock the door?
To lock the door do the reverse operation making sure the metal pin is engaged completely.
What should you do with the key after locking the door?
Remove the key and place it in a secure place for safekeeping.
How do you clean the appliance?
- Turn the temperature control to “OFF”, unplug the appliance, and remove all items, including shelves and crisper.
- Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
- Wash the shelves and crisper with a mild detergent solution.
- Wring excess water out of the sponge or cloth when cleaning the area of the controls, or any electrical parts.
- Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
What could happen if you fail to unplug the appliance?
Failure to unplug the appliance could result in electrical shock or personal injury.
What should you do during a power failure?
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.
What should you do during vacation time?
- Short vacations: Leave the beverage center operating during vacations of less than three weeks.
- Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.
How do you move the appliance?
- Remove all items.
- Securely tape down all loose items (shelves) inside your appliance.
- Turn the adjustable legs up to the base to avoid damage.
- Tape the door shut.
- Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.
What are some energy saving tips?
- The unit should be located in the coolest area of the room, away from heat-producing appliances, and out of the direct sunlight.
What should you do if you are having problems with your appliance?
You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
What is the possible cause if the appliance does not operate?
- Not plugged in.
- The circuit breaker tripped or a blown fuse.
- The appliance temperature control is set at “OFF” position.
What is the possible cause if the appliance is not cold enough?
- Check the temperature control setting.
- External environment may require a higher setting.
- The door is opened too often.
- The door is not closed completely.
- The door gasket does not seal properly.
What is the possible cause if the appliance turns ON and OFF frequently?
- The room temperature is hotter than normal.
- A large amount of contents has been added to the appliance.
- The door is opened too often.
- The door is not closed completely.
- The temperature control is not set correctly.
- The door gasket does not seal properly.
What is the possible cause if the light does not work?
- Not plugged in.
- The circuit breaker tripped or a blown fuse.
- The bulb has burned out.
What is the possible cause if there are vibrations?
Check to assure that the appliance is level.
What is the possible cause if the appliance seems to make too much noise?
- The rattling noise may come from the flow of the refrigerant, which is normal.
- As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance.
- Contraction and expansion of the inside walls may cause popping and crackling noises.
- The appliance is not level.
What is the possible cause if the door will not close properly?
- The appliance is not level.
- The door was reversed and not properly installed.
- The gasket is dirty.
- The shelves are out of position.
Where should you bring Avanti Appliances of 3.5 cubic feet capacity or less for repair?
All Avanti Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
What is covered under the limited one-year warranty?
For one year from the date of purchase by the original owner, Avanti Products will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.
What is the warranty period in rental or commercial use?
In rental or commercial use, the warranty period is 90 days.
What is covered under the limited second through the fifth-year warranty?
For the second through the fifth year from the date of original purchase, Avanti Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges.
What is the limited compressor warranty in rental or commercial use?
In rental or commercial use, the limited compressor warranty is one year and nine months.
Who is responsible for the cost to move the appliance to the servicers’ shop and back to the user’s home?
Cost to move the appliance to the servicers’ shop and back to the user’s home, as may be required, are the user’s responsibility.
What is not covered under the warranty?
- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Surcharges including, but not limited to, any after-hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, include the State of Alaska
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
What are the installation instructions?
- Remove the packing accessories (protective plastics, cardboard, and sticky strips).
- Clean the exterior with a soft dry cloth and the interior with a damp warm cloth.
- Select a location with a firm and level floor.
- Your refrigerator requires ventilation. Leave a minimum space of 5” upwards and sufficient space on the back to allow air circulation.
- Avoid direct sunlight or heat. Direct sunlight can affect the paint layer. Heat sources in its proximity will cause higher electricity consumption.
- For better performance, level the refrigerator using the adjustable legs or leveling screws.
What are the grounding instructions?
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord that has a grounding wire with a grounding plug. This plug must be connected to a properly installed and grounded outlet.
What could happen with improper use of the grounding plug?
Improper use of the grounding plug can result in a risk of electric shock. Consult an electrician if you do not fully understand the grounding instructions or if there is any doubt as to whether the appliance is properly grounded.
Should you use an extension cord?
No. Use an exclusive wall outlet. Do not connect your refrigerator to extension cords or together with any other appliance in the same wall outlet.
What is a very dangerous attraction for children?
An empty refrigerator is a very dangerous attraction for children. Remove magnetic seals, doors, or locks from any appliance that is not in use.
How do you operate the refrigerator?
To control the internal temperature of the unit adjust the control to the ambient temperature or for the purpose that will be used. The first time you turn on the refrigerator, adjust the temperature control to the position “6”. The range of the temperature control ranges from the “OFF” (no cooling) position to position “6” (maximum cooling). After 24 hours, adjust the temperature control to the position that best meets your needs. Position “4” is appropriate for using the refrigerator at home or in the office.
What should you do if the unit has been disconnected, has no power, or was turned off?
You must wait 3 to 5 minutes before turning it on again. If you want to turn it on before time the unit will not do so.
What happens if the temperature control is set to the “OFF” position?
If the temperature control is set to the “OFF” position, the unit will stop cooling, but it will not cut off the power to the refrigerator.
How do you use the door lock?
Your unit comes equipped with a lock and key combination. The keys are inside the plastic bag with the instruction manual. Insert the key into the lock and turn it to the left to open the door. To close it, turn the key to the right. Remove the key and place it in a safe place to prevent it from being lost.
What care should be taken during periods of absence?
- For short periods of absence (less than 21 days), the freezer may be left running. Place the temperature control knob in the minimum position.
- For longer periods of absence, it is advisable to leave the refrigerator clean and unplugged.
- Take everything out of the refrigerator and defrost and clean it thoroughly. Also remove the ice trays, clean them well and dry them internally.
- Leave the door ajar to allow air to enter and thus prevent the formation of odors.
What are some energy saving tips?
- Avoid leaving the door open for a long time.
- Avoid frequent opening of the door.
- Never place hot food inside the refrigerator. Wait until they are at room temperature.
- Place the temperature control knob in the appropriate position.
What should you do if you are going on vacation?
- Take all items out of the refrigerator-freezer if you are going on vacation for a month or more.
- Unplug the refrigerator and clean the refrigerator well, including the freezer tray.
- Leave the door open to prevent odors, condensation or mold.
What should you do if you are moving?
- Unplug the refrigerator and clean the refrigerator well, including the freezer tray.
- Remove all moving parts and pack them so that they do not move during transport.
- Close the refrigerator door and seal it with adhesive tape.
- Make sure the refrigerator is upright during the trip and cover it with a blanket.
What are the benefits of registering your product?
- Protect your product: Avanti Products will keep the model number and date of purchase of your new Avanti Products product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
- Promote better products: They value your input. Your responses will help them develop products designed to best meet your future needs.
CLICK HERE TO DOWNLOAD AVANTI BCA4499SSL (01) PDF MANUAL