FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF USER GUIDE
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF USER MANUAL
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF OWNER GUIDE
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF OWNER MANUAL
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF REFERENCE GUIDE
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF INSTRUCTION GUIDE
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF REFERENCE MANUAL
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF INSTRUCTION MANUAL
FREE ENGLISH AVANTCO 360DFC9HCL (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD AVANTCO 360DFC9HCL (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
AVANTCO 360DFC9HCL (01) PDF SUMMARY:
What should I do prior to equipment set-up, operation, and maintenance?
Please read the manual thoroughly.
How do I prevent damage when transporting the unit?
To prevent compressor or system damage, do not transport the unit on an incline of more than 45 degrees.
What should I avoid using as loading or unloading points?
Do not use the condenser, lid, or hinges as loading or unloading points.
What should I do before using the freezer?
Before use, remove and dispose of all packing material.
Where should I place the freezer to avoid vibration and noise?
Ensure the freezer is placed on a stable surface to avoid vibration and noise.
Where should I install the freezer for proper air circulation?
Install the freezer in a well-ventilated area with proper clearance between the surrounding walls and the cabinet wall for proper air circulation (at least 4” for DFF flat lid freezers).
Where should the freezer be installed?
The freezer should be installed in a dry place. Do not use it in direct sunlight. The freezer should be kept away from water, sinks, heat sources, and any volatile, corrosive materials.
What should I do if the unit has been transported on its side?
If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before plugging it in.
What should I do in the event of damage to the electric wires or plug?
In the event of damage to the electric wires or plug, please contact the after-sales service. Do not attempt to repair it yourself.
What should I do if the voltage is unstable?
If the voltage is unstable, please choose the suitable automatic voltage regulator.
How do I adjust the temperature control?
The temperature control may need to be adjusted based on the amount of food in the freezer and the ambient room temperature. More food or a higher room temperature may require a lower temperature setting (higher number).
How do I prepare the freezer before placing food inside?
Before placing food into the freezer, adjust the temperature control to the lowest point (highest number) and let it run until the temperature of the inner cabinet decreases to -13° Fahrenheit. Put the food in, and after 12 hours adjust the temperature control to the normal point.
What kind of food should I put in the freezer?
Never put hot food directly in the freezer. Food should be cold or frozen before placing it inside.
How full should I fill the freezer?
Do not fill the freezer full of product. For best results, meats and other large items should be divided into smaller parts, and you should leave space between items so cold air can properly circulate and maintain safe temperatures.
What should I do if the power is cut off?
If power is cut off, wait at least 5 minutes before turning on again to avoid damage to the compressor.
How should non-packaged foods be stored?
Non-packaged foods should be packed in plastic bags for proper safety.
What products should I never store in the freezer?
Never store flammable, explosive, or corrosive products in the freezer, and keep the freezer away from such materials.
How can the temperature in the cabinet be adjusted?
The temperature in the cabinet can be adjusted with the control knob.
What is the standard setting for holding frozen products if my unit has a numbered controller?
Setting “4” is the standard for holding frozen products. Adjust the knob to a lower number (warmer) or higher number (colder) to change the temperature.
What is the standard setting for holding frozen products if my unit doesn’t have a numbered controller?
The dot between “Freezing” and “Max” is the standard setting for holding frozen products. Use the labeling on the control to determine the best setting if you need to adjust this.
When should I defrost the freezer?
To ensure optimal performance, defrost when the thickness of the ice on the cabinet wall reaches 1/4”.
How do I defrost the freezer?
To defrost, turn the temperature control knob to the lowest setting (the lowest number, on numbered controllers) for 5 – 6 hours before defrosting. Power the freezer off and take all food out. Remove the ice buildup (DO NOT USE SHARP TOOLS). After defrosting, clean the wall with a dry cloth and then turn the power back on.
Why might I hear the sound of water flowing during operation?
The sound of water flowing during operation is normal; this is the refrigerant.
Why might dew form on the surface of the freezer?
When the humidity is high, dew may form on the surface of the freezer.
What should I expect regarding the condenser and compressor when the freezer is running?
When the freezer is running, the condenser and compressor will be hot.
What should I do if the freezer keeps unfreezing and the temperature control is set to the highest point?
Adjust the temperature.
What should I do if the freezer keeps unfreezing and the plug is not properly plugged in?
Make sure the plug is connected properly.
What should I do if the freezer keeps unfreezing and the fuse is broken off?
Replace the fuse.
What should I do if the compressor does not shut off and the temperature control is set to the lowest point?
Adjust the temperature.
What should I do if the compressor does not shut off and there is too much food in the freezer?
Remove some food from the freezer.
What should I do if the compressor does not shut off and there is ice buildup?
Defrost the freezer.
What should I do if the compressor does not shut off and the doors are being opened and shut too much?
Reduce the amount of time the door on the freezer is opened and shut.
What should I do if the compressor does not shut off and the freezer is too close to a wall?
Place the freezer away from the wall (at least 4").
What should I do if the compressor does not shut off and the freezer is located too close to a heat source?
Move the freezer away from the heat source.
What should I do if there are loud noises and the freezer is on an uneven surface?
Relocate the freezer to a level surface.
What should I do if there are loud noises and the refrigerating tubes are touching each other?
Make sure the tubes are not touching each other.
What should I consider to save energy?
In order to save energy, limit the number of times the lid is opened and the length of time the lid is open.
What should I avoid placing on top of the freezer?
Do not place heavy or hot things on top of the freezer; this can damage it.
What should I do before cleaning the freezer?
Be sure to power the freezer off before cleaning it.
How should I clean the freezer?
Use a soft cloth with some moderate detergent and warm water to clean the freezer.
How do I maintain the elasticity of the gasket?
Use warm water to clean oil or fruit juice stains on the gasket in order to keep its elasticity. Apply some talcum powder to it to prolong its life.
What should I do if the freezer will be unused for a long time?
If you plan to stop using the freezer, power it off, then clean the inside and keep the door open for 2-3 days to let it dry.
Who should not operate this machine?
Children should not operate this machine.
What should children not do around this equipment?
Children should not play around this equipment.
What voids the warranty?
Failure to contact the designated location prior to obtaining equipment service may void your warranty.
What does the warranty not cover?
Avantco Refrigeration will not warrant coverage for component failure or other damages that arise under the following conditions:
- Failure to install and/or use the unit within proper operating conditions specified by Avantco Refrigeration.
- Failure to properly maintain the unit. This includes, but is not limited to, basic preventative maintenance like cleaning the condenser coil.
- Products sold or used outside of the United States.
- Any damage that occurs as a result of negligence or improper handling.
- Overloading or improper loading of the unit in a manner that prevents proper airflow.
What else does the warranty not cover?
Additionally, no claims can be made against this warranty for spoilage of products, loss of sales or profits, or any other consequential damages. Normal wear type parts, such as light bulbs and gaskets, are not included in warranty coverage.
CLICK HERE TO DOWNLOAD AVANTCO 360DFC9HCL (01) PDF MANUAL