FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF USER GUIDE
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF USER MANUAL
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF OWNER GUIDE
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF OWNER MANUAL
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF REFERENCE GUIDE
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF REFERENCE MANUAL
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH AUTO METER PROPODS P61025 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD AUTO METER PROPODS P61025 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What safety precaution should be observed during installation?
It is important to wear safety glasses.
How do I remove the factory gauge bezel?
Remove factory gauge bezel per manufacturer’s instructions. Contact auto manufacturer for details.
How do I install the aluminum brackets for the instrument cluster bezel?
Remove the two factory screws at the bottom of the instrument cluster bezel and install the included aluminum brackets. Use outside holes to install for proper fit.
How do I install gauges and wiring?
Install gauges in the cluster and run wiring.
How do I install the Instrument Cluster Bezel?
Install Instrument Cluster Bezel.
How do I secure the Instrument Cluster Bezel?
Use the two factory screws to secure the top of the bezel, and the supplied screws to attach the Instrument Cluster Bezel to the aluminum brackets.
What additional parts might be needed when installing the Dash Pod with mechanical pressure or temperature gauges?
Installing this Dash Pod with mechanical pressure gauges may require 12ft. nylon tubing kit model 3226 (not for use with fuel pressure gauges). 12ft. capillary tubing may also be needed on mechanical temperature gauges.
What is “flashing” and will it be visible after installation?
Due to normal manufacturing processes you may have “flashing” (small fibers of plastic) around the pod holes. Once the gauge(s) are installed in the pod you will not be able to see the “flashing.”
CLICK HERE TO DOWNLOAD AUTO METER PROPODS P61025 (01) PDF MANUAL