Click here to download AUDIO-TECHNICA ATW-CHG3N (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** ATW-CHG3 / ATW-CHG3N User Manual TWO-BAY CHARGING STATION cnoi•cø audio-technica

****** Page 2 ****** Introduction Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference. Supported models This product supports the following models. * • 3000 Digital Series (AM-DT3101, ATW-DT3102) • 3000 Series (ATW-T3201 , ATW-T3202) *There are differences in the handled products depending on the country where they are sold. Recommended batteries The following batteries can be charged with this product. Name eneloop eneloop pro Duracell Rechargeable Energizer Ansmann VARTA GP ReCyk0+ 2700 Series Manufacturer Panasonic Panasonic Duracell Energizer Ansmann VARTA GP Batteries Ca acit 1900 mAh 2500 mAh 1950 mAh 2300 mAh 2850 mAh 21 OO mAh 2600 mAh • All other company and product names that appear in this document are trademarks or registered trademarks of their respective owners. Important information Warning: • To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Caution: • Do not expose this apparatus to drips or splashes. • To avoid electric shock, do not open the cabinet. • Refer servicing to qualified personnel only. • Do not expose this apparatus to excessive heat such as that generated by sunshine, fire or other heat sources. • Do not subject this apparatus to strong impact. • This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time. • In case of emergency, disconnect the AC adapter quickly. • Do not place any objects filled with liquids, such as vases, on this apparatus. • To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus. • Do not install this apparatus in a confined space such as a bookcase or similar unit. • Install this apparatus only in the places with good ventilation. • The rating label is put on the bottom of this apparatus. Battery caution: • Do not expose the battery to excessive heat such as sunshine, fire or the like. • Always consider the environment issues and follow local regulations when disposing of batteries. For customers in the USA FCC Notice Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. For customers in Canada IC statement CAN

****** Page 3 ****** Notes on use • Be sure to read the user manual for any device that you attach to the product. • Disconnect the AC adapter from the outlet when this product is not in use. • Be sure to use this product in combination with components specified by our company. • When connecting cables, make sure they are inserted all the way up to the plug. • Over time, discoloration may occur due to ultraviolet rays (especially direct sunlight) and friction. • Charge on flat areas. Devices will not be charged when the product is tilted. • If you repeatedly charge rechargeable batteries without completely exhausting them, a phenomenon called the memory effect occurs, where the power capacity of the batteries is reduced. To prevent this, completely exhaust rechargeable batteries before charging them. If you continue to have problems recharging the batteries, you may need to replace them with new rechargeable batteries. • When using the product as a stand without charging, unplug the AC adapter. • Heat is generated from the AC adapter while charging. Do not place the product near the AC adapter or in places of high temperature. Rechargeable batteries may not fully charge. • The capacity of the rechargeable batteries decreases as you repeatedly charge them. If the operation time becomes shorter, we recommend replacing the batteries with new ones as soon as possible. • If the product or the charging terminals of charging devices are dirty, the devices may not be able to charge sufficiently. Remove the dirt from the charging terminals before inserting devices into the product. • When charging for the first time or when not using the product for long periods, the power capacity of rechargeable batteries may decrease. In such cases, the batteries will recharge normally (to full capacity) after they have been charged and discharged several times. • Charge rechargeable batteries every six months even if you have not used them much during that time. Excessive discharging may decrease the capacity of rechargeable batteries or cause them to no longer be rechargeable. Maintenance • If the product becomes stained or covered with dust, be sure to disconnect the power plug before wiping it off with a dry and soft cloth. • Do not use benzine, thinner or electrical contact cleaner, etc. They may deform or otherwise damage the product, or cause operational failure. 2

****** Page 4 ****** Part names and functions ATW-CHG3 Top O Power indicator Lights up when the AC adapter is connected and the power is on. @ Status indicator Shows the charging status. @ Charging port (for handheld transmitters) Charging port (for body-pack transmitters) 3

****** Page 5 ****** Part names and functions ATW-CHG3 Bottom OUT — O Cap for DC jack o o 10 3 4 Removed when linking multiple units of this product (see below). @ DC input jack Connects the AC adapter. Bottom (caps for DC jacks removed) o o @ DC input jack for linking o o ID selector switch Used for switching when linking multiple units and configuring network settings. Blind seal Cord outlet Passes the AC adapter cord. o o Used when linking multiple units of this product. Power is supplied from linked products. DC output jack for linking Used when linking multiple units of this product. Supplies power to linked products. 4

****** Page 6 ****** Part names and functions ATW-CHG3N Top 00 O Power indicator Lights up when the AC adapter is connected and the power is on. Status indicator Shows the charging status. Charging port (for handheld transmitters) Charging port (for body-pack transmitters) O 00 O 5

****** Page 7 ****** Part names and functions ATW-CHG3N Bottom OUT — O Blind cap @ DC input jack Connects the AC adapter. @ Cap for DC jack o o o o Removed when linking multiple ATW-CHG3 units (see below). Blind seal Bottom (caps for DC jacks removed) OUT o o O o R E SET DO Reset button Resets network settings. Network port Used when connecting a network cable (Type: RJ45) to use the dedicated app on a computer. Cord outlet Passes the AC adapter cord. o o DO DC output jack for linking Used when linking multiple ATW-CHG3 units. Supplies power to linked products. 6

****** Page 8 ****** Using the product 1. 2. 3. Connect the AC adapter. • Pass the cord along the groove on the product and bring it out from the cord outlet. Connect the AC adapter The power indicator lights up and the power turns on. Turn off the device that will be charged and insert it into a charging port on the product. Turn off • You can charge up to two devices at tho same time. • Check the orientation of the device that will be charged before inserting it. It cannot charge if the orientation is incorrect. • When charging a handheld transmitter, attach the microphone capsule. • Although we recommend that you charge a device while it is off, you can also charge while it is on. In such cases, the device will turn oft automatically. 4. The status indicator lights up and the charging status is displayed. • For more about indicatorsl lighting sequences, refer to “Indicators” (p.9). • Charging completes in about 6.5 hours (when using 1900 mAh rechargeable batteries). Use devices after they are fully charged. Status indicator If the rechargeable batteries are close to full capacity, charging will complete in a short period of time. If you insert a device and the status indicator flashes, there may be a charging defect. Non-rechargeable batteries cannot be charged. If non-rechargeable batteries are inserted, a charging defect may be displayed. If a charging defect occurs, unplug the AC adapter to turn off the product, and then restart it. If the indicator still flashes even after restarting the product, the rechargeable batteries may no longer have any life. Replace them with new rechargeable batteries. 7

****** Page 9 ****** Connections Example system configuration Connect while referring to the figure below. Connect to outlet AC adapter (AD-SAI 230XA)tl Network cable (Type: 1. 2. 3. Linking (when using multiple units) Remove the caps for DC jacks. Connect the AC adapter to the first unit, and connect the link cable to the DC output jack for linking. Next, connect the link cable to the DC input jack for linking on the second unit. • Connecting an AC adapter to the second unit or any unit thereafter is not necessary. • You can add up to four ATW-CHG3 units, for a total of 5 connected units. Link cable 8 ATW-CHG3 / ATW-CHG3N ATW-CHG3 Link kit Contents • Link plate Sold separately. ATW-CHG3 Up to 5 units (4 additional units connected) • Link cable • Set of link plate screws 8 {o 8 8 (Second unit) 8 (First unit) AC adapter *2 Used when connecting to a network. Only ATW-CHG3N can be connected Fasten the link plate with link plate screws. Sot of link plate screws Link plate O ‘JIF Set of link plate screws 8

****** Page 10 ****** Indicators The indicators of the product flash and shine continuously to indicate the following operation statuses. Power indicator Operation status Network cable connected Mode confirmation Power on Auto (automatic IP address acquisition) Static (fixed IP address) Resetting Status indicator Operation status Charging Charging complete Charging defect Indicator display pattern Blue changes to green. Indicator display pattern e Blue e Red 9 O Green Lights solid blue Flashes twice, then changes to the indicator display for power on. Flashes three times, then changes to the indicator display for power on. Flashes for about two seconds, then changes to the indicator display for power on. Lights solid red Lights solid green Flashing red

****** Page 11 ****** Network settings You can use the dedicated app to monitor and control the ATW-CHG3N and linked chargers from a computer. Setting the ID (ATW-CHG3) When linking chargers, you can use the dedicated app to monitor and control all of them by setting different IDs for each charger. • The default setting is “2”. • The ID of ATYÆHG3N is fixed at “1 f ATW-CHG3N is not linked, setting the ID is not necessary. Refer to the table below and set the ID selector switch while the product is off. Switch position ID number Switch position ID number Confirming the mode (ATW-CHG3N) You can confirm whether the mode is set to “Auto” or “Static”. 1. 2. 1. 2. “Auto” is a mode in which the IP address is acquired automatically, while in “Static”, the IP address is fixed. The dedicated app is used to change the mode. The default setting is “Auto”. Quickly press the reset button. The power indicator flashes twice for Auto or three times for Static, and then shines continuously. • For more about indicatorsl lighting sequences, refer to “Indicators” 2 ON 3 ON 4 5 Resetting (ATW-CHG3N) You can return the network settings to their factory defaults. Connect the AC adapter and turn on the product. • The setting is complete. • If you set the ID while the product is on, turn it off and then turn it on again. 1. 2. Press and hold (about 2 seconds) the reset button. The power indicator flashes for about two seconds, and then shines continuously. • Resetting is complete. • For more about indicators’ lighting sequences, refer to “Indicators” (p.9). 10

****** Page 12 ****** Troubleshooting Issue The product does not turn on. The device does not charge, Dimensions Cause/Solution Check if the AC adapter is connected properly. Check if the charging terminals are dirty. Check if batteries are inserted in the device or if the batteries are alkaline batteries, Check if there is a charging defect. audio-technica 185 11 Reference (Units: mm)

****** Page 13 ****** Specifications Power supply Charging output Power consumption Charging time Operating temperature Dimensions Weight Sold separately *The time may vary depending on usage conditions. DC12V 3.0A DC3.6V 500mAx2 4.9W (CHG3) (when 2 transmitters are charging) 5.3W (CHG3N) (when 2 transmitters are charging) 27.4W (CHG3x5) (5 units are connected and 10 transmitters are charging) 27.8W (CHG3Nx1) (CHG3x4) (5 units are connected and 10 transmitters are charging) Approx. 6.5 hours (1 ,900 mAh rechargeable battery)* O oc to 40 oc (32 OF to 104 OF) 185 mm (7.28″) x 99 mm (3.90″) x 68.5 mm (2.70″) (W x D x H) 400 g (14.1 oz) (ATW=CHG3) 410 g (14.5 oz) AC adapter (AD-SAI 230XA), ATW-CHG3 Link kit (AT8687) 12

****** Page 14 ****** Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo Japan audio-technica.com @2018 Audio-Technica Corporation Global Support Contact: at-globalsupport.com 2329009100201 ver.1 2018.09.01

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



AUDIO-TECHNICA ATW-CHG3N (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.