Click here to download AUDIO-TECHNICA AT5040 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** AT5040 User Manual Cardioid Condenser Microphone audio-technica Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference. Features •Audio-Technica’s premier studio condenser vocal microphone • Extremely musical high-fidelity performance, with profound realism and depth, presence and purity of sound • Four rectangular diaphragms (2 micron) function together as Audio-Technica’s largest-ever element, providing combined surface area twice that of a standard one-inch circular diaphragm • Exceptionally low noise and wide dynamic range ideal for studio vocals • Discrete components carefully selected for optimized capsule performance • High-SPL capability and extended frequency response • Hand assembled and inspected for 100% quality control •Advanced internal shock mounting decouples the capsule from the microphone body • Elegant, durable housing of aluminum and brass • Included advanced-design custom AT8480 shock mount provides superior isolation • Custom hard-shell carry case with die-cut foam compartments offers protection during storage and transport Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. Cautions for the product • Do not subject the product to strong impact to avoid malfunction. • Do not disassemble, modify or attempt to repair the product. • Do not handle the product with wet hands to avoid electric shock or injury. • Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place. Notes on use •An Audio-Technica logo is on the front of the microphone. Position this side of the microphone toward the sound source. • In use, secure tho cable to the microphone stand or boom, leaving a slack loop at the microphone. This will ensure the most effective shock isolation and reduce the possibility of accidentally pulling the microphone out of its mount. Connection procedure Connect the output terminals of the microphone to a device that has a microphone input (balanced input) compatible with a phantom power supply. The output connector is an XLRM-type with polarity as shown in the figure below. Output terminals How to use the shock mount I. Before placing the microphone into the included shock mount, make certain that the locking mechanism on the top of the shock mount is in the unlocked position. 2. Open the shock mount front clamps. 3. Insert the microphone directly into the shock mount’s front opening with the Audio-Technica logo on the microphone facing outward and the microphone body vertically centered in the shock mount clamps. Firmly press the microphone inward until you hear a click and the microphone feels snug in the shock mount. 4, Secure the microphone by turning the lever on the top of the shock mount to the locked position. * To remove, first turn the lever on the top of the shock mount to the unlocked position. Next, pull the microphone directly outward. A slight twisting motion can aid in removing the microphone from the shock mount. Be careful that the microphone does not drop down and expose the grille to the shock mount clamps. Specifications Element Polar pattern Frequency response Open circuit sensitivity Impedance Maximum input sound level Noise Dynamic range Signal-to-noise ratio Phantom power requirements Weight Dimensions Output connector Audio-Technica case style Accessories • 1 Pascal = 10 dynes/cm2 10 microbars Fixeddlarge back plate, permanently polarized condenser Cardioid 20-20,000 Hz -25 dB (56.2 (0 dB = 1 V/Pa, 1 kHz) 50 ohms 142 dB SPL (l kHz at THC)) 5 dB SPL 137 dB 11 kHz at Max spo 89 dB (1 kHz at 1 Pa, A-weighted) 48 V DC, mA 582 g (20.5 oz) 165.3 mm (6.51″) long, 57.0 mm (2.24″) maximum body diameter Integral 3-pin XLRM-type RIO AT8480 shock mount, stand adapter (3/8″-5/8″), carry case 94 dB SPL For product improvement, the product is subject to modification Without notice. Polar pattern aoo• 270′ 21T LEGEND 200H2 5kHZ , 120′ 150* Igo• SCALE IS 5 DECIBELS PER DIVISION Frequency response 10dg c 20 50 200 1k 2k 5k 20k PINI (ground) PIN3 (cold) 1 PIN2 (hot} 2 3 This product requires 48 V DC phantom power. Frequency in Hertz LEGEND 00, 50cm Dimensions 165.3 Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan @2017 Audio-Technica Corporation Global Support Contact: at-globalsupport.com Made in Japan 057 P52456 142314000001 a: (Unit: mm) ver-1 2017.09.1b

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



AUDIO-TECHNICA AT5040 (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.