Click here to download AUDIO A-RXMON (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** AUDIO A-RXMON Headphone Monitor for AIO-RX — User Guide —

****** Page 2 ****** A-RXMON User Guide Copyright/ Doc Rev History Info Copyright 0 2018 Audio Ltd. All rights reserved. I audioltd.com 7 Century Court, Tolpits Lane, Watford WD18 9RS, UK I info@audioltd.com Revision Date Dec 2018 Description Initial Publication Table of Contents Copyright/ Doc Rev History Info Table of Contents Overview Key Features System Quickstart . Connectors, Controls Description 2 2 3 3 3 4 Firmware Updates Certifications Industry Canada Conformity FCC Conformity Declaration of Conformity . Minimize RF Exposure -2- 6 6 6 6 6

****** Page 3 ****** A-RXMON User Guide Overview The A-RXMON is a belt-worn A10 Receiver enclosure. The A-RXMON provides a simple, portable solution for the user to easily monitor two A10-TX audio channels with headphones. Key Features Accommodates the A10-RX receiver (sold separately) Uses standard Sony L-mount batteries (sold separately) Heavy-duty 3.5 mm headphone jack User-friendly headphone volume control/power switch Monitor channel 1, channel 2 or both channels simultaneously Combined with the User Groups feature for the AIO-RX, the A-RXMON provides fast, easy and intuitive switching by name between multiple A10-TX frequencies Rugged, spring steel belt clip Micro USB port for updating firmware and loading User Groups on the A-RXMON System Quickstart Installation: 1. 2. 3. Remove any A-SL or A-XLR connected to the A10-RX. Orient the A10-RX in the slot according to the image below. 2 o Figure 2: A-RXMONFront Panel Carefully slide the AIO-RX into the slot. Press until you feel the connector seat fully and the receiver is flush to the face of the A-RXMON. Using the included 4 M2.5×16 mm screws, attach the A10-RX to the A-RXMON via the holes in the bottom of the unit. Powering: l. Insert a fully-charged Sony L-Mount compatible battery into the battery slot. The battery retainer clip will spring into place to secure the battery. 2. If retracted, push the headphone volume/power control, and then turn it clockwise past the detent to power on the receiver. Operation: l. On the A10-RX, navigate to Menu > Outputs > Mode, and set to Analogue. 2. Connect headphones. For optimal operation, navigate to Menu > Outputs > Max level and set the output to +14 dBu. 3. Flip Channel Selector switch according to which channel(s) you want to monitor. The system is now ready for use. -3-

****** Page 4 ****** A-RXMON User Guide Connectors, Controls Description 1 2 3 4 1 -Channel Selector Switch 9 8 7 6 5 Figure 2: A-RXMONFront Panel 3-way selection of AIO-RX channels: Position 1 2 Center Description Flip left to monitor channel 1 in both right and left headphone channels. Flip right to monitor channel 2 in both right and left headphone channels. When switch is centered, both I and 2 are audible in headphones (channel 1 in left, channel 2 in right). 2 -Headphone Volume / Power Dual-purpose, retractable control for both system power and headphone volume. 3 -Headphone Output A 3.5 mm TRS headphone jack, compatible with mono or stereo headphones from 8-600 ohms impedance. 4 -Battery Mount L-mount for a dual-terminal, Lithium-ion battery. 5 -USB-B Port Used for updating firmware and loading User Groups on the A10-RX. 6 -Cord Notch Holds headphone cord in place along either side of device. 7 Retainer Clip Secures battery in place. Press in to release and remove battery from the device. 8 -Belt Clip Attaches device to belt, strap, or waistband. 9 -Receiver Slot Accepts one Audio Limited A10-RX. -4-

****** Page 5 ****** Specifications Material Weight Operating Voltage Headphone Out Audio Gain Control Powering Battery Run Time 3.12 in [79.2 mm] ……….—lii A-RXMON User Guide 30% fiberglass-filled nylon 4.6 oz / 130.4 g 6 – 8.4 VDC 3.5 mm TRS headphone jack, compatible with mono or stereo headphones of any impedance Frequency response 20 Hz 20 kHz +/- ldB referenced to 1 kHz 8-600 ohms impedance 1 Sony L-type Li-ion battery 2200mAHr Runtime -3Hr 15Min 4400mAHr Runtime 7Hr 30Min 2.20 in [56.0 mm] -5-

****** Page 6 ****** A-RXMON User Guide Firmware Updates From time to time, Audio Ltd. issues new firmware for the AIO-RX receiver, which may be updated while it is installed into an A-RXMON. Make certain to register your product at the Audio Ltd. website to receive firmware update notifications. Prior to updating an AIO-RX receiver in an A-RXMON, ensure the following: The receiver is properly slotted into the A-RXMON, the A-RXMON is connected from the USB-B port on the side panel to a USB-A port on the computer, and that it is powered ON. Download and install the latest version of the Mic2Wav utility from Audio Limited’s website at: audioltd.com/resources/mic2wav/ Download the new firmware update file (PRG) from the Audio Limited’s website, specifically the Resources > Firmware Downloads webpage. A Change List ofnewfeaturesfor the latest firmware can also be found on this webpage. To update AIO-RX firmware via A-RXMON: 1. 2. 3. 4. Start the Mic2Wav utility application. Click File > Update RX and then select the firmware update file (PRG) previously downloaded to your computer from the Audio Limited website. After a momentary refresh, Mic2Wav will detect the A10-RX receiver in the A-RXMON and display the Serial Number as well as current Firmware Version. Mic2Wav will detect if the receiver is running an older version of Firmware and will automatically select it to be updated. Click Update. Click 0K to confirm, if prompted. A status bar will indicate the progress of the update. As the receiver is updated, its screen will display Programming and the LEDs will turn off. This is normal operation. After the update, the receiver ‘s menu will be available again. An Update Complete popup appears after the receiver has been updated. -6-

****** Page 7 ****** A-RXMON User Guide Certifications Industry Canada Conformity This radio transmitter has been approved by Industry Canada to operate with the supplied monopole whip antenna only. Other antenna types are strictly prohibited for use with this device. This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada’s document CPC-2-1-28, ‘Optional Licencing for Low-Power Radio Apparatus in the TV Bands’, for details. EN: This device complies with Industry Canada’s license exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. FR :Le présent appareil est conforme aux CNR d’ Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. FCC Conformity The A10-RX receiver complies with the following requirements: FCC (Federal Communications Commission) Part 15 Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity The Declaration of Conformity documentation is provide online at: audioltd.com/doc/. Before putting the products into operation, please observe the respective country-specific regulations. Minimize RF Exposure To avoid the possibility of exceeding the FCC RF exposure limits, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 7mm separations between the device and the user’s body. For further information, contact Audio Ltd or your local distributor Copyright 0 2018 Audio Ltd. All rights reserved. I audioltd.com 7 Century Court, Tolpits Lane, Watford WD18 9RS, UK I info@audioltd.com

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



AUDIO A-RXMON (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.