AUDAC LIN10 (01) PDF MANUAL

The LINO series are column speakers designed for a wide variety of general-purpose applications in acoustically difficult environments, ranging from speech and announcement applications to background music systems. Typical applications include houses of worship, auditoria, presentation rooms, public transportation hubs, and many more. They are constructed using solid aluminum materials and finished with a rigid, finely perforated front grill.

They are available in two models, LINO4 and LINO10, which differ in length and driver count. Both models consist of 2″ low/mid-frequency drivers with a 1″ central positioned tweeter for high frequencies. They are designed to offer uniform acoustic performance in reverberant venues, reducing echo and microphone feedback to optimize the intelligibility of music and speech.

ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY

ALWAYS HANDLE THIS UNIT WITH CARE

CLEAN ONLY WITH DRY CLOTH

HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT

DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, HEAT, MOISTURE OR VIBRATION

THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER.

ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE SPEAKER DOWN.

DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL DOWN

ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP. ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING. IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, INFORM YOUR VENDOR IMMEDIATELY.

USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE, THINNER OR OTHER COMBUSTIBLES

AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING THE LOUDSPEAKER

DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

This product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to do so.)

The WEEE marking indicates that this product should not be disposed with regular household waste at the end of its product life. This regulation is created to protect both the environment and human health.

This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose this product to your local collection point or recycling centre for electrical and electronic waste. This will make to sure that it will be recycled on an environmentally friendly manner, and will help to protect the environment in which we all live.

Every LINO speaker comes delivered with two L-shaped brackets for installation and focusing.

1. The L-shaped brackets have to be fixed to the wall through 2 screws each. The fasteners used should be chosen depending on the mounting surface (e.g., brick, concrete, wood).

2. Once the wall brackets are mounted to the installation position, the speaker should be fixed to the brackets. This is done by inserting both supplied bolts and tightening them.

3. The slot-shaped holes in the brackets allow for vertical directional adjustments, while horizontal adjustments are possible through rotation of the speaker on the brackets.

To connect the LINO speaker, the wires coming from the amplifier must be connected to the 6-pin terminal block connector on the rear of the speaker. The appropriate terminals should be used depending on whether the speaker will be used in a low impedance system or a constant voltage (70/100V) system.

For low impedance connections, use the ‘COM’ and ‘8Ω’ (for LINO4) or ’20Ω’ (for LINO10) terminals.

When using in a constant voltage 70/100V system, the power taps can be adjusted in 4 steps (A, B, C, D) by connecting the amplifier’s positive (+) wire to the desired terminal and the negative (-) wire to the ‘COM’ terminal. Each position corresponds with a specific impedance/power setting as shown in the table below:

Tapping	LINO4			LINO10
	100V	70V	Imp.	100V	70V	Imp
A		20 W	250 Ω		40 W	125 Ω
B	20 W	10 W	500 Ω	40 W	20 W	250 Ω
C	10 W	5 W	1000 Ω	20 W	10 W	500 Ω
D	5 W	2.5 W	2000 Ω	10 W	5 W	1000 Ω
Low-Z			8 Ω			20 Ω

Specification	LINO4	LINO10
Max Power	40 Watt	80 Watt
Continuous power (AES)	20 Watt	40 Watt
Nominal impedance	8 Ω	20 Ω
Line transformer taps	250 Ω – 70V/20W 500 Ω – 100V/20W – 70V/10W 1k Ω – 100V/10W – 70V/5W 2k Ω – 100V/5W – 70V/2.5W	125 Ω – 70V/40W 250 Ω – 100V/40W – 70V/20W 500 Ω – 100V/20W – 70V/10W 1k Ω – 100V/10W – 70V/5W
Frequency response (± 3 dB)	170 Hz – 15 kHz	170 Hz – 15 kHz
Frequency range (-10 dB)	120 Hz – 20 kHz	120 Hz – 20 kHz
Sensitivity (1W/1m)	88 dB	90 dB
Sound pressure (Max. W/1m)	101 dB	107 dB
Cross-over network	Passive built-in	Passive built-in
Drivers	4 x 2″ + 1″ HF	10 x 2″ + 1″ HF
Connectors	6-pin Terminal block (5.08 mm)	6-pin Terminal block (5.08 mm)
Mounting bracket	Adjustable L-brackets (steel)	Adjustable L-brackets (steel)
Construction	Alu extrusion + end caps	Alu extrusion + end caps
Front finish	Fine perforated alu grill	Fine perforated alu grill
Ingress protection	IP3x	IP3x
Operation temperature range	-20°C to +50°C	-20°C to +50°C
Colour	White (RAL9003) Black (RAL9005)	White (RAL9003) Black (RAL9005)
Dimensions (W x H x D)	72 x 414 x 68.3 mm	72 x 796 x 68.3 mm (excl bracket)
Weight	1.81 Kg	3.7 Kg
Packaging	Carton box	Carton box
Shipping weight & Volume	2.1 Kg – 0.008 Cbm	4.2 Kg – 0.014 Cbm

The included accessories are:

A 6-pin terminal block connector

Adjustable L-brackets (steel)