Click here to download AT&T TL96497 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** AT&T User’s manual TL90077 DECT 6.0 expansion handset for use with AT&T models TL96457/TL96477/TL96487/ TL96497/TL96547 with BLUETOOTH@ wireless technology

****** Page 2 ****** Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 25-27 of this manual. For complete instructions, please refer to the manual provided with your TL96457/TL96477/TL96487/ TL96497/TL96547 telephone. You can also visit our website at telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. This telephone meets the California Energy Commission regulations for energy consumption. Your telephone is set up to comply with the energy- conserving standards right out of the box No further action is necessary. Model number: TL90077 Type: DECT 6.0 expansion handset Serial number: Purchase date: Place of purchase: Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. Compatible With Hearing Aid I-Coal TIA-10S3 ENERGY STAR Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The T IA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. The ENERGY STAR@ program (energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to supply this product with an ENERGY STAR@ qualified power adapter meeting the latest energy efficiency guidelines. The Bluetooth@ word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 0 2017-2019 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.

****** Page 3 ****** Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. AT&T users manual ZECT S.’ “‘.andnt ATAT User’s manual Battery for cordless handset Cordless handset Battery compartment cover Charger for cordless handset with power adapter installed

****** Page 4 ****** User’s manual TL90077 DECT 6.0 expansion handset for use with AT&T models TL96457/TL96477/TL96487/TL96497/ TL96547 with BLUETOOTH@ wireless technology Table of contents Getting started In sta II ation Quick reference guide Charger installation 10 .. 12 24 Importa nt safety information …………………………………………………………………………………….25 Battery installation and charging Registration and deregistration Add and register handsets Register a handset to your telephone … Deregister handsets Deregister all handsets from your telephone base Appendix Troubleshooting Maintenance………………………………………………….. Safety information 12 13 25 Especially about cordless telephones 26 Precautions for users of implanted cardiac pacemakers 27 ECO mode 27 Especially about telephone answering systems………… For C-UL compliance Mesures de sécurité importantes FCC Part 68 and ACTA .. FCC Part 15 California Energy Commission battery charging testing instructions 28 28 34 35 Lim ited wa rra nty 36 Technical specifications 39 DECT 6.0 digital technology 39 Telephone operating … 39 Redefining long range coverage and clarity 39 HD audio 39 Simulated full-duplex handset and base speakerphones 39

****** Page 5 ****** Getting started Installation You must install and charge the battery before using the telephone. STOP! See pages 7-9 for easy instructions. Your product may be shipped with a protective sticker covering the handset display – remove it before use. For customer service or product information, visit our website at telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the charger too close to: Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or workbench. 1

****** Page 6 ****** Getting started Quick reference guide CHI 2 VOLUME (i) CHARGE light On when the handset is charging in the telephone base or charger. @ VOICE Press to activate the voice- controlled application of connected cell phone. PUSH TO TALK Press to initiate a one-to-one or one-to-group broadcast. Press and hold to broadcast to a group of system devices. (D Softkeys (2) Press to select the menu item displayed above the key. While in a menu, press to select an item, save an entry or setting, cancel an operation, or back up to the previous menu. 2 @ (f)CELL 2 Press to make or answer a cell call. During a call, press to answer an incoming CELL 1/2 call when you hear a call waiting alert. ADIR/VOLUME Press to show directory entries when the telephone is not in use. Press to scroll up while in a menu. Press to increase the listening volume when on a call, or increase the message playback volume. While entering names or numbers, press to move the cursor to the right.

****** Page 7 ****** Getting started Quick reference guide 9 CELL 2 OFF CANCEL •1 ABC2 ‘ CHI 4 5 VCID/VOLUME Press to review the caller ID log when the telephone is not in use. Press to scroll down while in a menu. Press to decrease the listening volume when on a call, or decrease the message playback volume. While entering names or numbers, press to move the cursor to the left. ÆHOME/FLASH Press to make or answer a home call. During a call, press to answer an incoming home call when you receive a call waiting alert. During message playback, press to call back the caller if the caller’s number is available. 3 6 WET FOFF/CANCEL During a call, press to hang up. While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode. When the handset is ringing, press to mute the ringer temporarily. While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. Press and hold to set or to dial your voicemail number.

****** Page 8 ****** Getting started Quick reference guide 51051 Press to switch to tone dialing temporarily during a call if you have pulse service. While entering names, press to change the next letter to upper or lower case. QUIET# (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry. Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode. O/SPEAKER Press to make or answer a home call using the speakerphone. Press to answer a cell call using the speakerphone. Press to switch between the speakerphone and the handset. MNO TONE oaeo SPEAKER MUTE/DELETE During a call, press to mute the microphone. When the handset is ringinq, press to mute the ringer temporarily. While reviewing the redial list, directory, caller ID log, allow list, block list, or the star name list, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or the recorded announcement. REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed. While entering numbers, press and hold to insert a dialing pause. CALL BLOCK Press to block the incoming call when the telephone is ringing or during the call. When the handset is not in use, press to show the Smart call blocker menu. 4

****** Page 9 ****** Getting started Quick reference guide Main menu The selected menu item is highlighted. CELL i DIR CID Menu CEIL 2 Feature menu Play messages Answering sys Smart call blk Directory Caller ID log Intercom Ringers Set date/time Caller ID annc Settings Using menus: 1. Press in idle mode (when the telephone is not in use) to enter the main menu. 2. Press VCID or ADIR to scroll through menu items. 3. Press -OR- to select or save the highlighted item. Press or F0FF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display. For complete instructions, refer to the manual provided with your TL96457/TL96477/TL96487/TL96497/TL96547 telephone system. If you are unable to find your manual, go to telephones@att.com/manuals to read and/or download the manual. 5

****** Page 10 ****** Getting started Charger installation Install the charger, as shown below. Plug the power adapter into a power outlet not controlled by a wall switch. o c:30 IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at telephones.attecom or call 1 (800) 222-3111. In Canada, 1 (866) 288-4268. 2. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 6

****** Page 11 ****** Getting started Battery installation and charging Install the battery, as shown on page 8. Once you have installed the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 39 for battery operating times. If the screen is blank or shows Place in charger and a flashing a, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset shows Low battery and a flashing a. If you are on a call in low battery mode, the handset beeps every minute. The following table summarizes the battery charge indicators and actions to take. Battery indicators The screen is blank or shows Place in charger and O flashes. The screen shows Low battery and flashes. The screen shows HANDSET X. Battery status The battery has no or very little charge. The handset cannot be used. Battery has enough charge to be used for a short time. Battery is charged. 7 Action Charge without interruption (at least 30 minutes). Charge without interruption (at least 30 minutes). To keep the battery charged, place it in the telephone base or charger when not in use.

****** Page 12 ****** Getting started Battery installation and charging 1. Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated. 11 2. Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. 0 x 8

****** Page 13 ****** Getting started Battery installation and charging 3. Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. AT&T To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions to install and charge a new battery. IMPORTANT INFORMATION 1. Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342). To order, visit our website at telephones.att@com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage. 9

****** Page 14 ****** Registration and deregistration Add and register handsets Before using a new TL90077 handset, make sure it is registered with an AT&T TL96457/TL96477/TL96487/TL96497/TL96547 telephone system (purchased separately). These telephone systems can support up to 12 handsets. The handset(s) provided with your telephone system are already registered as HANDSET 1, and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12). Each handset must be registered to the telephone base before use. Register a handset to your telephone base Method 1: 1. Before you begin registration, make sure the handset is out of the telephone base or charger and shows To register, see user manual. 2. Put the handset you wish to register on the telephone base cradle. 5g:S: For registration, put the handset on the telephone base, not the handset charger. 3. The handset shows Registering… Please wait. If the registration is successful, both the handset and the telephone base screens display HANDSET X Registered (HANDSET represents the handset name, X represents the handset number). Both the handset and the telephone base beep. The handset is now registered with the telephone base. 10

****** Page 15 ****** Registration and deregistration Add and register handsets If registration fails, the system will automatically try to register again. If registration fails after the third try, Registration failed appears on both screens. The handset shows To register, see user manual and the telephone base returns to idle mode. This may take up to five minutes to occur. Please start again from Step 1. Method 2: 1. Press and hold C/FIND HS on the telephone base for about four seconds and it shows Registering… Please wait. Release C/FIND I-IS. 2. Press QUIET # on the handset. The handset shows Registering… Please wait. If the registration is successful, both the handset and the telephone base screens display HANDSET X Registered (HANDSET represents the handset name, X represents the handset number). Both the handset and the telephone base beep. The handset is now registered with the telephone base. If registration fails, Registration failed appears on both screens. The handset shows To register, see user manual and the telephone base returns to idle mode. Please start again from Step 1. Notes: You cannot register a handset if any other system handset is in use. If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are full and sounds two beeps. If it is the first time you install your AT&T TL96457/TL96477/TL96487/TL96497/TL96547 telephone system, or power returns following a power outage, the handset will prompt you to set the date and time when registration is successful. After that, it will prompt if you want to set up Smart call blocker* and the answering system via voice guides. Press on the handset to start. For details, see the corresponding sections in the telephone system’s user’s manual. To skip these settings, press 60FF/CANCEL on the handset. * Includes licenced Qa/telTM technology. Qalte/TM is a trademark of Trueca// Group Limited. 11 E guide

****** Page 16 ****** Registration and deregistration Deregister handsets You may need to deregister your handsets if: You have 12 registered handsets and need to replace a handset. -OR- You wish to change the designated handset number of your registered handsets. You must first deregister ALL handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the instructions on this page before beginning the deregistration process. Deregister all handsets from your telephone base In addition to the cordless handsets, this operation will also deregister all cordless headsets and speakerphones registered to your telephone base. 1. Make sure that all handsets are out of the telephone base and chargers before you begin deregistration. 2. Press and hold C/FIND HS on the telephone base for about 10 seconds. The telephone base screen shows Registering… Please wait for five seconds, then it shows Deregister all devices?. Release C/FIND HS. 3. Immediately press C/FIND HS again or press E You must press C/FIND HS within five seconds. If the telephone base returns to idle screen, start again with Step 1. 4. The telephone base shows Deregistered all devices when the registration completes. It takes up to 10 seconds to complete the deregistration process. Before registering the handset again, wait for the cordless handset screen to display To register, see user manual. 5. To register the handset(s) to the telephone base again, follow the registration instructions on the pages 10-11. Notes: If the deregistration fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handset(s) if any other system handset is in use. Even if the battery is depleted, you can still deregister the handset by following the steps mentioned above. After the handset is charged for at least 10 minutes, the screen shows To register, see user manual. 12

****** Page 17 ****** Appendix Troubleshooting If you have difficulty with your phone, please try the following suggestions. For Customer Service, visit our website at telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The handset registration is unsuccessful. Follow the handset registration instructions to register the handset again (see Add and register handsets on pages 10-11). My telephone doesn’t work at all. Make sure the power cord is securely plugged in. Make sure you plug the battery connector securely into the cordless handset. Make sure you plug the telephone line cord securely and firmly into the telephone base and the telephone wall jack. Charge the battery in the cordless handset for at least 11 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. Ifthe battery is depleted, it might take approximately 30 minutes to charge the handset before it shows Low battery. See page 7 for details. Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. You may need to purchase a new battery. Refer to Battery installation and charging in this user’s manual on pages 7-9. 13

****** Page 18 ****** Appendix Troubleshooting The remote voice control feature does not work. Make sure the operating system of your cell phone is iOS 8 or later, or Android@ 4 or later. Make sure your cell phone is paired and connected to your TL96457/TL96477/TL96487/TL96497/TL96547 telephone system via Bluetooth. Make sure no Bluetooth applications are running in the background of your cell phone. Keep your cell phone within 15 feet of the telephone base. Do not lock up your cell phone’s screen or set passcode for activating the voice-controlled application (voice app), such as Siri@, Google Now M and S Voice@. Make sure you have turned on or logged in to the applications on your cell phone that you will be sending your voice commands, such as GPS, e-mail and social networking accounts. Make sure your cell phone’s data or Wi-Fi signal is in full strength and your cell phone can connect to the Internet. Try to activate the voice app on your cell phone to ensure it is in place. Once you have activated the remote voice control feature, you are using your cell phone’s voice app to operate your cell phone. If the voice commands do not work, please check the cell phone user’s manual and the voice app’s help topics to find out what commands you can use and any limitations of the voice app. Android@ is a registered trademark of Google Inc. Google Now is a trademark of Google Inc. Siri@ is a registered trademark of Apple Inc. S Voice@ is a registered mark of Samsung Electronics Co., Ltd. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. 14

****** Page 19 ****** Appendix Troubleshooting Some cell phone manufacturers or network carriers may customize the phone’s operating system and implement their own voice app. If you want to use Google Now, you need to manually set it as your default voice app. For detailed instructions, refer to your cell phone user’s manual, or contact your cell phone’s manufacturer or network carrier. You may also go to “Google Product Forums” on the Internet and check the corresponding help topics. Due to the settings of certain cell phones and voice apps, your cell phone may not support the remote voice control feature. Contact your cell phone’s manufacturer or network carrier, or check the voice app’s help topics if you encounter any problems. The remote voice control feature ends unexpectedly while it is in use. The Bluetooth function of your cell phone may be off, or you may have moved your cell phone out of Bluetooth range of the telephone base. Make sure the Bluetooth function of your cell phone is turned on and keep your cell phone within 15 feet of the telephone base. The data or Wi-Fi connection of your cell phone may be lost. Make sure your cell phone’s data or Wi-Fi signal is in full strength. The feature may be ended automatically by your cell phone. For example, a cell call has been established via the remote voice control feature and the call has just ended. If you receive a landline or cell line incoming call when you have activated remote voice control on a connected cell phone, the remote voice control operation will be ended. The voice-controlled application of your cell phone may be affected by other cell phone operations in the background. If the problem persists, contact your cell phone’s network carrier. 15

****** Page 20 ****** Appendix Troubleshooting The display shows No home line. I cannot get a dial tone. Try all the suggestions mentioned above. If the previous suggestions do not work, disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone. If there is no dial tone on that other telephone either, your telephone line cord may be defective. Install a new telephone line cord. If changing the telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Try using a different wall jack in your home to connect your TL96457/ TL96477/TL96487/TL96497/TL96547 telephone, or contact your telephone service provider (charges may apply). I cannot dial out. Try all the suggestions mentioned above. Make sure you have a dial tone before dialing. The handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before dialing, or dialing from another room in your home with less background noise. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). 16

****** Page 21 ****** Appendix Troubleshooting My cordless handset isn’t performing normally. Make sure you plug the power cord securely into the telephone base. Plug the power adapter into a different, working electrical outlet without a wall switch. Move the cordless handset closer to the telephone base. You might have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Out of range OR No pwr at base appears on my cordless handset. Ensure you plug the telephone base in properly and the power is on. Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize. Move the cordless handset closer to the telephone base. You might have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. The batteries do not hold a charge. If the handset is in the charger and the charge light does not turn on, refer to The charge light is off (page 23) in this Troubleshooting guide. Charge the battery in the handset for at least 11 hours. For optimum daily performance, return the handset to the telephone base or charger when not in use. 17

****** Page 22 ****** Appendix Troubleshooting If the battery is depleted, it might take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 7 for details. You might need to purchase a new battery. Refer to Battery installation and charging in this user’s manual on pages 7-9. I hear other calls while using my phone. Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider. I get noise, static, or weak signals even when I’m near the telephone base. If you subscribe to high-speed Internet service (DSL – digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters. You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed. Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You might experience decreased performance while the microwave oven is operating. 18

****** Page 23 ****** Appendix Troubleshooting If your phone is plugged in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Relocate your phone to a higher location. The phone may have better reception when installed in a high area. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). I experience poor sound quality when using the speakerphone. For increased sound quality while using the speakerphone, place the handset on a flat surface with the dialing keys facing up. My cordless handset does not ring when I receive a call. Make sure that the ringer is not off. Refer to Ringer volume in the user’s manual provided with your TL96457/TL96477/ TL96487/TL96497/TL96547 telephone. Make sure you plug the telephone line cord securely into the telephone base and telephone jack. Make sure you plug in the power cord securely. The cordless handset may be too far from the telephone base. Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably on an upper floor. 19

****** Page 24 ****** Appendix Troubleshooting If the other phones in your home are having the same problem, contact your telephone service provider (charges might apply). Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges might apply). Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Completely remove the battery. Replace it and place the cordless handset into the telephone base. Allow up to one minute for the handset to reestablish its connection with the telephone base. Your line cord might be defective. Try installing a new line cord. My calls cut in and out while I’m using my cordless handset. Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You might experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or surge protector, try plugging the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Move your telephone base to a higher location. The phone might have better reception when installed in a high area. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). 20

****** Page 25 ****** Appendix Troubleshooting My caller ID isn’t working. Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. The caller must be calling from an area that supports caller ID. Both your telephone service provider and your caller’s telephone service provider must use caller ID compatible equipment. If you subscribe to high-speed Internet service (DSL – digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems resulting from DSL interference. Contact your DSL service provider for more information about DSL filters. System does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. System screens all my incoming home calls. You may have set Smart call blocker to screen calls without numbers and uncategorized calls. The telephone asks callers to announce their names or press the pound key (#). We recommend that you add the phone numbers of your family members and friends, and desired businesses to your directory or allow list, or add their names to the star name list. This will avoid Smart call blocker to screen their calls. My telephone does not screen incoming cell calls. The screening feature of Smart call blocker is applicable to home calls only. All incoming cell calls will get through and ring. You can block calls of a cell phone number by adding the number to the block list. 21

****** Page 26 ****** Appendix Troubleshooting While screening a home call, the telephone suddenly stops screening and connects to the call. Another handset may have picked up the screening call. If you have another telephone system sharing the same telephone line, and someone picks up the call on the other telephone system while the screening is in progress, the screening process will be terminated and connect you to the caller. My telephone block calls from someone I know. You may have saved the caller’s number in your block list. If yes, remove the number from the list. I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. Make sure your computer is powered on. Make sure your Internet connection is working properly. Make sure that the software is installed and running for your nontraditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug it into a multiple port USB hub (USB splitter) that is not powered. In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply. If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information. 22

****** Page 27 ****** Appendix Troubleshooting The charge light is off. Make sure you plug the power and line cords in correctly and securely. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. Clean the cordless handset, charger and telephone base charging contacts each month with a pencil eraser or cloth. The battery may not be connected to the handset or is missing completely. Ensure that the battery is installed properly. I’ve set my LCD language to Spanish or French and I don’t know how to change it back to English. Press in idle mode, then enter 364# using the dialing keys. You hear a confirmation tone. Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not fix the problem, do the following (in the order listed): 1. 2. 3. 4. 5. 6. Disconnect the power to the telephone base. Disconnect the cordless handset battery. Wait a few minutes. Connect power to the telephone base. Completely remove the battery. Replace the battery and place the cordless handset into the telephone base or charger. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. 23

****** Page 28 ****** Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords. 24

****** Page 29 ****** Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the user’s manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. In an inadequately ventilated environment, the user should not plug the phone into a power outlet, nor put a charged handset into the cradle where there are concentrations of flammable or flame- supporting gases. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. Do not use this product near water or when you are wet. For example, do not use it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink and laundry tub. Do not use liquids or aerosol sprays for cleaning. Ifthe product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, see the Troubleshooting section on pages 13-23 of this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section pages 36-38. Do not open this product except as directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. Replace batteries, only as described in your user’s manual (pages 7-9). Do not burn or puncture batteries —they contain caustic chemicals. This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 25

****** Page 30 ****** Appendix Important safety information CAUTIONS: Use only the power adapter provided with this product. To obtain a replacement, visit our website at telephones@att.com or call 1 (800) 222-3111 In Canada, dial 1 (866) 288-4268. Use only the supplied rechargeable battery or replacement battery (model BT183342/ BT283342). To order, visit our website at telephones.att.com, or call 1 (800) 222-3111. In Canada, 1 (866) 288-4268. To prevent risk of fire or battery explosion, replace with the correct battery type. Dispose of used batteries according to the instructions. Especially about cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery chargen Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. 26

****** Page 31 ****** Appendix Important safety information The RBRC@ Seal means that the manufacturer is voluntarily ecycte participating in an industry program to collect and recycle nickel- Ni-MH metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. You may call 1-800-8-BATTERY@ for locations accepting spent Ni-MH batteries. RBRC@ and 1-800-8-BATTERY@ are registered trademarks of the Rechargeable Battery Recycling Corporation. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (W T R), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, W TR recommends to physicians that: Pacemaker patients: Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. W TR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base. Especially about telephone answering systems Two-way recording: This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation. SAVE THESE INSTRUCTIONS 27

****** Page 32 ****** Appendix For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparattre dans ce guide d’utilisation. Respectez toujours les mesures de sécurité et de sécurité de base lorsque vous utilisez ce produit, afin de réduire les risques de blessures, d’incendie, ou d’électrocution. Information relative la sécurité Veuillez lire et comprendre toutes les instructions de ce guide d’utilisation. Relectez toutes les inscriptions apparaissant sur le produit. Évitez d’utiliser le téléphone pendant un orage. II pourrait y avoir un faible risque d’électrocution. N’utilisez pas un téléphone pros d’une fuite de gaz. Dans certaines circonstances, une flamméche pourrait se produire lorsque l’adaptateur est branché une prise de courant, ou lorsque le combiné est déposé sur son chargeur. Ceci est un événement fréquent associé avec la fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher un téléphone dans une prise de courant, et ne devrait pas déposer un combiné chargé dans le chargeur, si le téléphone se trouve dans un environnement comportant une concentration de gaz inflammables ou ignifuges, å moins de se trouver dans un endroit oü la ventilation est adéquate. Une flamméche dans de tels environnements pourrait provoquer une explosion. De tels environnements peuvent comprendre : les endroits oti de l’oxygéne å des fins médicales est utilisé sans ventilation adéquate; des endroits oü se trouvent des gaz industriels (dissolvants de nettoyage, des vapeurs de gazoline, etc.), une fuite de gaz naturel, etc. N’utilisez pas ce produit prés de l’eau ou lorsque vous étes mouillés. Par exemple, ne l’utilisez pas dans des sous-sols humides ou sous la douche, ou pros d’une piscine, d’un bain, d’un évier de cuisine, ou d’une cuve de lavage. N’utilisez pas de liquides, ou de vaporisateurs aérosol de nettoyage. Si le produit entre en contact avec du liquide, débranchez immédiatement le fil téléphonique ou le cordon d’alimentation. Ne rebranchez pas le produit avant qu’il soit complétement sec. Installez cet appareil dans un endroit protégé oü personne ne peut trébucher sur les cordons d’alimentation ou la ligne téléphonique. Protégez les cåbles contre les dommages ou l’abrasion. 28

****** Page 33 ****** Appendix For C-UL compliance Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) des pages 13-23 de ce guide d’utilisation. Si vous ne pouvez pas régler le probléme, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 36-38. N’ouvrez pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture du produit ou le remontage inadéquat pourrait vous exposer des tensions dangereuses ou autres dangers. Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation (pages 7-9). N’incinérez pas et ne percez pas les piles — elles contiennent des produits chimiques caustiques. L’adaptateur de courant est conqu pour étre orienté verticalement ou installé sur le planchen Les broches ne sont pas conques pour se maintenir en place si la fiche est branchée dans une prise de courant au plafond, sous la table ou sous une armoire. Pour les produits å brancher une prise de courant, la prise de courant doit étre installée pres du produit, afin d’assurer une accessibilité sécuritaire å la prise de courant. MISES EN GARDE: N’utilisez seulement l’adaptateur inclus avec ce produit. Pour obtenir une piéce de rechange, visitez notre site Web au telephones@att.com ou composez le Au Canada, composez le 1-866-288-4268 N’utilisez que la pile de rechargeable incluse ou une pile de rechange (modéle BT183342/BT283342). Pour commander, visitez notre site Web telephones@att.com ou composez Ie 1-800-222-3111. Au Canada, composez le Afin de prévenir les risques d’incendie ou d’explosion de la pile, replacez la pile avec une pile du méme type. Jetez les piles épuisées en respectant les instructions. 29

****** Page 34 ****** Appendix For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil Confidentialité : Les mémes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil. Pour cette raison, vous ne devez pas considérer les conversations sur un téléphone sans fil comme étant aussi confidentielles que celles d’un téléphone å cordon. Alimentation électrique : La base de ce téléphone sans fil doit étre branchée une prise de courant électrique fonctionnelle. La prise électrique ne doit pas étre contrölée par un interrupteur mural. Les appels ne peuvent pas étre effectués partir du combiné si la base n’est pas branchée, si elle est hors fonction ou si le courant électrique est coupé. Interférences potentielles aux téléviseurs : Certains téléphones sans fil fonctionnent sur des fréquences pouvant causer des interférences aux téléviseurs et magnétoscopes. Pour réduire ou prévenir de tels parasites, ne pas déposer la base du téléphone sans fil å proximité d’un téléviseur ou magnétoscope, ni directement sur celui-ci. Si votre téléviseur affiche des interférences, éloignez le téléphone sans fil de celui-ci afin de réduire les parasites. Piles rechargeables : Ce produit comporte des piles rechargeables l’hydrure métallique de nickel. Usez de prudence lorsque vous manipulez de telles piles et veillez å ne pas les court-circuiter avec des matériaux conducteurs, tels que des bagues, bracelets et clés. La pile ou le conducteur peut surchauffer et vous brüler. Respectez la polarité adéquate entre les piles et le chargeur de piles. Piles rechargeables å l’hydrure métallique de nickel : Jetez ces piles de maniére sécuritaire. N’incinérez pas et ne peercez pas les piles. Comme pour les autres piles du méme type, si elles sont brülées ou percées, des matiéres corrosives peuvent s’en échapper, ce qui risque de causer des brülures ou autres blessures corporelles. ecycze Ni.MH Le sceau de l’organisme de recyclage RBRCMD sur les piles å l’hydrure métallique de nickel signifie que le fabricant de cet appareil participe volontairement au programme industriel visant å reprendre et recycler ce type de piles lorsqu’elles ne servent plus, au sein du territoire des États-Unis et du Canada. Vous devez apporter ces piles chez un détaillant participant ou le centre de recyclage le plus prés de chez vous. Ou vous pouvez composer le 1-800-8-BATTERYMD afin de connattre les endroits qui acceptent les piles å l’hydrure métallique de nickel mortes. RBRCMD et 1-800-8-BATTERYMD sont des marques déposées de Rechargeable Battery Recycling Corporation. 30

****** Page 35 ****** Appendix For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des États- unis, la firme W TR recommande aux médecins : Avis aux détenteurs de stimulateurs cardiaques: Ils doivent tenir le téléphone sans fil å une distance d’au moins six pouces du stimulateur cardiaque. Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en fonction. Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve dans la direction opposée au stimulateur cardiaque. L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causé par les gens qui utilisent un téléphone sans fil å proximité de ceux-ci. Mode ECO Lorsque le socle communique avec le combiné, le mode ECO sera activé automatiquement. Ceci réduit la consommation d’énergie selon la distance entre le socle du téléphone et le combiné. Spécifiquement en rapport avec les répondeurs téléphoniques Enregistrement deux voies : Cet appareil n’émet pas de bips d’avertissement qui permettent de prévenir l’autre partie que vous enregistrez la conversation. Pour assurer votre conformité aux réglements fédéraux ou provinciaux en rapport avec les enregistrements des conversations téléphoniques, vous devriez informer l’autre partie lorsque vous activez l’enregistrement. CONSERVEZ CES INSTRUCTIONS 31

****** Page 36 ****** Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJII jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENS should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. 32

****** Page 37 ****** Appendix FCC Part 68 and ACTA Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENS of all the devices not exceed five. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. 33

****** Page 38 ****** Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 34

****** Page 39 ****** Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only, When the CEC battery charging testing mode is activated, all telephone functions, except handset battery charging, will be disabled. When first purchased and properly installed for charging (see the Battery installation and charging section on page 8), put the cordless handset in the handset charger to charge. The CEC battery charging testing mode is activated while charging. If you have registered the cordless handset to the TL96457/TL96477/TL96487/ TL96497/TL96547 base, below are the testing instructions. To activate the CEC battery charging testing mode: 1. 2. 3. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are inserted with charged batteries before proceeding. While you press and hold C/FIND HS, plug the telephone base power adapter back to the power outlet. After about 20 seconds, when the HOME light starts flashing, release C/FIND HS and then press it again within two seconds. You hear a confirmation tone. The HOME light turns off and all handsets display To register, see user manual. Allow up to one minute for the process to complete. If the phone fails to enter this mode, repeat Step 1 through Step 3. The telephone base will be powered up as normal if you fail to press C/FIND HS within two seconds in Step 3. To deactivate the CEC battery charging testing mode: 1. Unplug the telephone base power adapter from the power outlet, then plug it back in. The telephone base is powered up as normal. 2. Register your handsets back to the telephone base. See pages 10-11 for handset registration instructions. BC 35

****** Page 40 ****** Appendix Limited warranty The AT&T brand is used under license – any repair, replacement or warranty service, and all questions about this product should be directed to our website at telephones@att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 1. What does this limited warranty cover? The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales package (“PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. 2. What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (“materially defective PRODUCT”)? During the limited warranty period, the manufacturer’s authorized service representative will repair or replace at the manufacturer’s option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer will return repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. 3. How long is the limited warranty period? The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer. 4. What is not covered by this limited warranty? This limited warranty does not cover: PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or 36

****** Page 41 ****** Appendix Limited warranty PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or PRODUCT returned without valid proof of purchase (see item 6); or Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. S. How do you get warranty service? To obtain warranty service, visit telephones.attecom or call 1 (800) 222-3111. In dial 1 (866) 288-4268. Note: Before calling for service, please review the user’s manual; a check of the PRODUCT’s controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 37

****** Page 42 ****** Appendix Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/ provinces do not allow limitations on how long an implied warranty lasts, so the limitation mentioned above may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the limitation or exclusion mentioned above may not apply to you. Please retain your_original sales receipt as proof of purchase. 38

****** Page 43 ****** Appendix Technical specifications RF frequency band Channels Handset battery Charger voltage (AC adapter output) Operating times* 1921.536MHz 1928.448MHz 5 2.4 VDC, AAA x 2, Ni-MI-I 6VDC @400mA Talk time (handset): up to 7 hours Talk time (speakerphone): up to 5 hours Standby: up to 7 days * Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This is achieved through a unique antenna design and advances in noise-filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in range competitions against similarly equipped phones of the leading competition. Now, calls can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over a certain distance — which can vary with the locations of the telephone base and handset, the weather, and the construction of your home or office. Redefining long range coverage and clarity This telephone base comes with an antenna which gives much better clarity and covers a longer range than before. HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio. It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio. Simulated full-duplex handset and base speakerphones The simulated full-duplex speakerphones on your handset and telephone base allow both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage. 39

****** Page 44 ****** AT&T telephones.att.com The Bluetooth@ word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 02017-2019 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Siri@ is a registered trademark of Apple Inc. Android@ is a registered trademark of Google Inc. Google Now is a trademark of Google Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Qalteln’ is a trademark of Truecall Group Limited. S Voice@ is a registered mark of Samsung Electronics Co., Ltd. RBRC@ and 1-800-8-BATTERY@ are registered trademarks of the Rechargeable Battery Recycling Corporation. Printed in China. Issue 4.0 AT&T 05/19.

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



AT&T TL96497 (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.