PDF Content Summary:
****** Page 1 ****** Atrust Atrust t60/t62 Thin Clients Quick Start Guide Thank you for purchasing Atrust thin client solution. Read this Quick Start Guide to set up your t60/t62 and access Microsoft, Citrix, or VMware desktop virtualization services quickly. For more information, please refer to the User’s Manual for t60/t62. NOTE: Your warranty will be voided if the warranty seal on the product is broken or removed. Atrust t62 Atrust t60 1 40-T6000000-04 1 Power Button and 1/0 Ports 2, Assembling the AC Adapter To assemble the AC adapter for your t60/t62, please do the following: 4 Getting Started To start using your t60/t62, please do the following: Atrust t60 Atrust t62 3 4 Description O O 1. 2. 3 Unpack your thin client package and take out the AC adapter and its detached plug. Slide the plug into the AC adapter until it clicks into place. NOTE: The supplied plug may vary, depending on different areas. Getting Connected To make connections for your t60/t62, please do the following: 1. 2. 3. Icon Ensure that your monitor(s) is connected and turned on. NOTE: Please note that you need to connect and turn on your monitor(s) before powering up the thin client. Otherwise, the client may fail to set an appropriate resolution for the monitor(s). Press the Power button to turn on the client. Wait a moment for Atrust Quick Connection screen to appear. Goto s to set the time zone for the first time use. Ifthe time zone had been set: (a) Go to 7 for accessing Microsoft Remote Desktop services. (b) Goto 8. for accessing Citrix services. (c) Goto 9 for accessing VMware View or Horizon View services. Atrust Quick Connection Screen No. 1 2 3 4 5 6 7 8 9 10 1. 2. 3. 4. Connect USB ports • toa keyboard and mouse separately. Connect the LAN port to your local network with an Ethernet cable. Connect and turn on the monitor(s). • For yourt60, connect the VGA port ; toa monitor, and then turn on the monitor. • Foryourt62, connect the DVI-I ‘ or DVI-D porto toa monitor, or connect both to two monitors, and then turn on the monitor(s). If only the VGA monitor is available, use the supplied DVI-I to VGA adapter. o Setup Ren•yote VMware Network Component Name Power button Microphone port Headphone port USB port DC IN USB port LAN port VGA port DVI-I port DVI-D port Press to power on the thin client. Long press to force power off the thin client. Connects to a microphone. Connects to a set of headphones or a speaker system. Connects to a USB device. Connects to an AC adapter. Connects to a mouse or keyboard. Connects to your local area network. Connects to a monitor (t60 only). Connects to a monitor (t62 only). Connects to a monitor (t62 only). Power Off Local Desktop Description DVI-I to VGA adapter DVI-I port (t62 only) VGA cable Connect the DC IN a power outlet using the AC adapter supplied. Power Off Local Desktop Setup Network Click the icon to shut down or restart the system. Click the icon to enter the local Linux desktop. To return to this screen from the local Linux desktop, see Click the icon to launch Atrust Client Setup. Indicates the network type (wired or wireless) and status. Click the icon to configure network settings.
****** Page 2 ****** Configuring the Time Zone To set the time zone for your t60/t62, please do the following: 7 Accessing Microsoft Remote Desktop Services To access Microsoft Remote Desktop services, please do the following: System Time Zone drop-down menu Atrust Citrix Connection Screen NOTE: To return toAtrust Quick Connection screen (see 4 ), press Esc. Logging On to Citrix Services When connected, the Citrix Logon screen appears. The appeared screen may vary with the service type and version. NOTE: A message ‘This Connection is Untrusted’ might appear. Consult the IT administrator for details and ensure the connection is secure first. To import a certificate, click Setup > System > Certificate Manager > Add. To bypass, click I Understand the Risks > Add Exception > Confirm Security Exception. The following is an example of Citrix Logon screens. Citrix Logon Screen 9 Accessing VMware View Services To access VMware View or Horizon View services, please do the following: 1. 2. 3. 4. 6 Click the Setup icon to launch Atrust Client Setup. On Atrust Client Setup, click System > Time Zone. Atrust Client Setup me one Neust Save 1. 2. 3. 8. Remote Desktop Click on Atrust Quick Connection screen. On the appeared window, type in the computer name or IP address of the remote computer, user name, password, and domain (if any), and then click Connect. Remote oestcp Connection Tc ret-rn t’ grevi•n 9:reen; gress use t a NOTE: To discover available MultiPoint Server systems over your network, click ‘A, select the desired system, and then click 0K. Type in data manually if the desired system cannot be found. NOTE: To return to Atrust Quick Connection screen (see 4. ), press Esc. The remote desktop will be displayed on the screen. Accessing Citrix Services VMware View on Atrust Quick Connection screen. 2. 3. 4. 5. 6. On the opened window, enter the FQDN or IP address of the VMware View Connection Server, and then click Connect. NOTE: A window might appear with a certificate message about the remote server. Consult the IT administrator for details and k Connect Click the Time Zone drop-down menu to select the desired time zone. Click Save to apply, and then close Atrust Client Setup. Returning to the Quick Connection Screen Type the required user name, password, domain, and click Log On to access virtual desktops or applications. Gtn:Ä To return to Atrust Quick Connection screen when on local Linux desktop, please double click Atrust Quick Connection on that desktop. Connecting to the Server To connect to the server where the Citrix Web Interface is hosted, please This area will display Citrix XenDesktop or Citrix XenApp, depending on your Citrix service type. do the following: 1. Click on Atrust Quick Connection screen. 2. On the appeared Atrust Citrix Connection screen, enter the IP address / URL / FQDN of the server, and then click Log On. NOTE: FQDN is the acronym of Fully Qualified Domain Name. NOTE: To return to Atrust Citrix Connection screen, press Esc. NOTE: On Desktop Selection or Application selection screen, you can • Use Alt + Tab to select and restore a hidden or minimized application. • Click Log off on the top of the screen to return to CitrixLogon screen. • Press Esc to return to Atrust Citrix Connection screen directly. ensure the connection is secure first. To import a certificate, click > System > Certificate Manager > Add. To bypass, Setup click Connect Insecurely. NOTE: To return to Atrust Quick Connection screen (see ‘4, ), close the opened window. A Welcome window might appear, click 0K to continue. A window appears prompting for the credentials. Enter your user name, password, click the Domain drop-down menu to select the domain, and then click 0K. Enter your user name and password. A window appears with available desktops for the provided credentials. Double click to select the desired desktop. The virtual desktop will be displayed on the screen. Version 0 2012-14 Atrust Computer All rights reserved.
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL