Click here to download ATEN UH7230 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Thunderbolt 3 Multiport Dock USER MANUAL UH7230

****** Page 2 ****** EMC Information Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance vv’ith the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detetmined by tuming the equipment off and on, the user is encouraged to ty to conect the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that which the receiver is connected; Consult the dealer an experienced radio/television technician for help. FCC Caution: Any changes or modifications not expressly approved by the patty responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. KCC Statement 01 71 7 IF: (B ) RoHS This product is RoHS compliant.

****** Page 3 ****** UH7230 User Manual Online Registration International eservice.aten.com Telephone Support International China Japan Korea North America United Kingdom Technical Support 886-2-8692-6959 86-400-810-0-810 81-3-5615-5811 82-2-467-6789 1-888-999-ATEN ext 4988 44-8-4481-58923 • For international online technical support — including troubleshooting, documentation, and software updates: eservice.aten.com • For North American technical support: Email Support Online Technical Support Troubleshooting Documentation Software Updates Telephone Support support@aten-usa.com support.aten.com 1-888-999-ATEN ext 4998 -3-

****** Page 4 ****** Package Contents The UH7230 Thunderbolt 3 Multiport Dock package contains the following items: • 1 UH7230 Thunderbolt 3 Multiport Dock • 1 Thunderbolt 3 (USB-C) Cable • 1 Power Adapter with AC Power Cord • 1 User Instructions* Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it. * Features may have been added to the UH7230 since this manual was printed. Please visit our website to download the most up-to-date version of the manual. Copyright 0 2017 ATENO International Co., Ltd.@ Manual Date: 2019-03-04 ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. -4-

****** Page 5 ****** Overview The UH7230 Thunderbolt 3 Multiport Dock connects a laptop to Ethernet DisplayPort, USB-C 3.1 Gen 1, speaker, and microphone ports through a single USB-C cable. The all-in-one dock provides a total of 8 ports and is designed to instantly connect and disconnect from your Thunderbolt 3 laptop. The UH7230 supports a single Thunderbolt monitor, with a resolution of up to 5K (5120 x 2880 @ 60Hz), and dual 4K (4096 x 2160 @ 60Hz) multi-display setups, such as one DisplayPort and one Thunderbolt 3 or USB-C display. The Gigabit Ethernet port delivers Internet speeds up to one Gigabit (1000 Mbps). This multiport dock also supports USB Power Delivery 2.0, which means the UH7230 can provide power to matched USB-C laptops with PD Profile specifications of 20V/4.25A, 15V/3A, 9V/ 3A and 5V/3A. The UH7230 Thunderbolt 3 Multiport Dock is ideal for quickly connecting peripherals and for displaying video content from a laptop – at work, school or home. It allows you to add an additional monitor for enhanced multitasking, such as designing and viewing movies or photos in high definition. It is a perfect desktop companion for your Thunderbolt 3 enabled laptop -5-

****** Page 6 ****** Features • Supports both Thunderbolt 3 (40Gbps) and USB 3.1 Gen 2 (1 OGbps) protocols through a single Thunderbolt cable Connect up to 8 devices to a laptop via a single Thunderbolt 3 USB-C cable, or daisy-chain up to 5 additional Thunderbolt devices Supports 5K resolution on a single Thunderbolt 3 display or dual 4K resolution on one DisplayPort display and one USB-C / Thunderbolt 3 display 85W Universal Power Delivery for charging a Thunderbolt 3 PC or Mac; supports 20V/4.25A, 15V/3A, 9V/3A and 5V/3A power specification for the output power Compatible with legacy Thunderbolt devices via adapter Gigibit Ethernet port Audio line-in and line-out OS Support: Windows 10 32/64 bit, and OS X Sierra 10.12 later -6-

****** Page 7 ****** System Requirements Hardware 1 Thunderbolt 3 enabled laptop Software • Windows@ 10 (32-bit / 64-bit) and above • Mac OS X 10.12 and above*

****** Page 8 ****** Components UH7230 Front View No. I 2 Component USB 3.1 Gen 1 Type-A Port* USB 3.1 Gen I Type-C Port Description Plug a USB 3.0/2.0/1.1 peripheral device into this port. Connects to a compatible USB 3.1 Gen 1 Type-C peripheral. UH7230 Rear View o o No. 1 2 3 4 Component Gigabit LAN Polt USB 3.1 Gen 1 Type-A Port Audio In Port Audio Out Polt Description Plug an Ethernet cable into this port to provide a network connection. Plug a USB 3.0/2.0/1.1 peripheral device to this port. Plug the speakers into this audio jack. Plug a microphone into this audio jack. -8-

****** Page 9 ****** No. 5 6 7 8 Component Thunderbolt 3 USB-C Host Port Thunderbolt 3 USB-C Data Port DisplayPort Port DC Power Jack Description Connect the laptop via Thunderbolt 3 IJSB-C cable to this port (package included). Connect a IJSB-C or Thunderbolt 3 peripheral device to this port. Connect the cable that connects a DisplayPort monitor to this pod Plug the power adapter into this port -9-

****** Page 10 ****** Installation 1. Make sure that the power to any device that you connect to the installation has been turned off. 2. Make sure that all devices you will be installing are properly grounded. Hardware To set up your UH7230 installation, refer to the diagram (the numbers in the diagram correspond to the steps), and do the following: 1. Plug the AC power adapter (included with this package) to the DC power jack on the rear of the UH7230. 2. Connect the Thunderbolt 3 USB-C cable (included with this package) to a Thunderbolt 3 enabled laptop and then connect the other end to the Thunderbolt 3 Charging port (provides USB Power Delivery capability). 3. Connect a DisplayPort monitor to the DisplayPort port on the UH7230. The laptop will automatically detect the display. * (see Note, next page) 4. Use an Ethernet cable to connect the Gigabit LAN port to an Internet connection. 5. Use audio cables to connect the Line In and Line Out ports to a microphone and speakers, respectively. 6. Use a USB 3.1 Gen 1 cable to connect a USB 3.1 Gen 1 peripheral to the rear USB 3.1 Gen 1 port. 7. Use a Thunderbolt 3 USB-C cable to connect a Thunderbolt 3 peripheral device to the second Thunderbolt 3 port on the rear panel.*(see Note, next page) 8. Use a USB 3.1 Genl cable to connect a peripheral device to the front USB 3.1 Gen 1 port (provides fast charging). 9. Use a USB-C cable to connect a compatible peripheral to the front Thunderbolt 3 USB-C port. -10-

****** Page 11 ****** Note: A Thunderbolt 3 or USB-C monitor can be connected to the Thunderbolt 3 USB-C Data Port along with the DisplayPort monitor (in step 3) to provide a dual view setup. Alternatively, by disconnecting the DisplayPort monitor (in step 3) and connecting a Thunderbolt 3 monitor to the Thunderbolt 3 USB-C Data Port, you can achieve 5K resolution, if the monitor supports a 5K video resolution. 8 9 o o O O -11-

****** Page 12 ****** Specifications Function Laptop Connections Device Connections Connectors Laptop Device LAN Ports Audio Inputs Audio Outputs Power Jack Video Output Video Resolution Single View via Thunderbolt 3 USB-C Data Port via DisplayPort pot-t Dual View via Thunderbolt 3 USB-C Data Port via DisplayPort pot-t Power Consumption Environmental Operating Temperature Storage Temperature Humidity Physical Properties Housing UH7230 1 Thunderbolt Laptop 5 Max (via Thunderbolt Daisy-Chaining) 1 x Thunderbolt 3 (USB-C) Female (Black) 1 x Thunderbolt 3 (USB-C) Female (Black) 3 x USB 3.1 Gen 1 Type-A Female (Blue) 1 x USB 3.1 Gen 1 Type-C Female (Black) 1 x Gigabit Ethernet Female (Black) 1 x 3.5 mm Stereo Input Female (Black) 1 x 3.5 mm Stereo Output Female (Black) 1 1 x DisplayPort Female (Black) 1 x Thunderbolt 3 (USB-C) Female (Black) Thunderbolt 3 (USB-C) Monitor: 5K @ 60 Hz USB-C Monitor: 4096 x 2160 @ 60 Hz 4096 x 2160 @ 60 Hz 4096 x 2160 @ 60 Hz 4096 x 2160 @ 60 Hz DC20V; 170W 0—400 C -20-600 c 0—80% RH, Non-condensing Aluminum -12-

****** Page 13 ****** Function Weight Dimensions (L x W x H) UH7230 0.37 kg (0.83 lb) 22.20 x 8.20 x 2.60 cm (8.74 x 3.23 x 1.02 in.) -13-

****** Page 14 ****** Limited Hardware Warranty ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two [2] years (warranty period may vary in certain regions/countries) commencing on the date of original purchase. This warranty period includes the LCD panel of ATEN LCD KVM switches. Select products are warranted for an additional year (see A+ Warranty for further details). Cables and accessories are not covered by the Standard Warranty. What is covered by the Limited Hardware Warranty ATEN will provide a repair service, without charge, during the Warranty Period. If a product is defective, ATEN will, at its discretion, have the option to (1) repair said product with new or repaired components, or (2) replace the entire product with an identical product or with a similar product which fulfills the same function as the defective product. Replaced products assume the warranty of the original product for the remaining period or a period of 90 days, whichever is longer. When the products or components are replaced, the replacing articles shall become customer property and the replaced articles shall become the property of ATEN. To learn more about our warranty policies, please visit our website: http:/haten.com/global/en/legal/policies/warranty-policy/ -14-


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ATEN UH7230 (01) PDF MANUAL

Leave a comment, question, review or page error.

This site uses Akismet to reduce spam. Learn how your comment data is processed.