Click here to download ASUS VIVOMINI VC66R (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** VivoMini VC66 Series User Manual Hornu HIGH.OEFINITION INTERFACE

****** Page 2 ****** E13165 Revised Edition V4 June 2017 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS”WITHOUTWARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOTHE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANYTIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright 0 2017 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OFTHE FOLLOWING: (1 ) THIRD- PARTY CLAIMS AGAINSTYOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. SERVICE AND SUPPORT Visit our multi-language web site at asus.com/support/

****** Page 3 ****** Contents About this manual Conventions used in this manual Typography Package contents Getting to know your VivoMini Features Front panel Left side 10 Right side 10 Rear panel Using your VivoMini Getting started 16 Connect the AC power adapter to your VivoMini 16 Connect the USB cable from keyboard or mouse Connect a display panel to your VivoMini 18 Turn on your VivoMini 20 Turning your VivoMjnj off 21 Putting your VivoMini to sleep 21 Entering the BIOS Setup 21 Quickly enter the BIOS 22 Load default BIOS settings 22 Upgrading your VivoMini Upgrading memory modules 24 Installing or upgrading the M.2 SSD 29 Installing or upgrading the wireless card 30 Installing 2.5″ HDD / SSD 31 Appendix Safety information 34 Setting up your system 34 Care during use 34 Regulatory notices 36 ASUS contact information 40 VivoMini VC66 Series

****** Page 4 ****** About this manual This manual provides information about the hardware and software features of your PC, organized through the following chapters: Chapter 1: Getting to know your VivoMini This chapter details the hardware components of your VivoMini. Chapter 2: Using your VivoMini This chapter provides you with information on using your VivoMini. Chapter 3: Upgrading your VivoMini This chapter provides you with information on how to upgrade the memory modules, wireless modules, and hard disk drive / solid state drive of your VivoMini. Appendix This section includes notices and safety statements your VivoMini. Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your VivoMini’s data and components. 4 Typography Bold text /ta/ic VivoMini VC66 Series Indicates a menu or an item to select. This indicates sections that you can refer to in this manual.

****** Page 5 ****** Package contents Your VivoMinj package contains the following items: VivoMini Power cord* NOTE: Technical documentations AC power adapter* *Actual product specifications and package contents may vary depending on the model type, country, or region. If the device or any of its components fail or malfunction during normal or proper use and it is still within the warranty period, bring the device and the warranty card to you nearest ASUS Service Center. VivoMini VC66 Series 5

****** Page 6 ****** 6 VivoMini VC66 Series

****** Page 7 ****** 1 Getting to know your VivoMini

****** Page 8 ****** 8 Features Front panel ASUS VivoMini 345 Top cover The removable top cover allows you access to the hard disk drive and the memory modules. IMPORTANT! Before removing the top cover, turn off your VivoMini and unplug the power cable. Optical Drive (on selected models) Your VivoMini’s optical drive may support several disc formats such as CDs, DVDs, recordable discs, or rewritable discs. Headphone jack This port allows you to connect amplified speakers or headphones. USB 3.0 port The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate up to 5 Gbit/s and is backward compatible to USB 2.0. VivoMini VC66 Series

****** Page 9 ****** see USB 3.0 Type-C port This USB Type-C (Universal Serial Bus Type-C) port provides a maximum of 1.5A output current, transfer rate of up to 5 Gbit/s, and is backward compatible to USB 2.0. NOTE: The Type C port has a reversible-plug connector. USB 2.0 port The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, flash disk drives, external HDDs, speakers, cameras and printers. Power button The power button allows you to turn the VivoMini on or off. You can also press the power button once to put your VivoMini to sleep mode. VivoMini VC66 Series 9

****** Page 10 ****** Left side Right side Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions. Air vents The air vents allow air to enter your VivoMini chassis. IMPORTANT! For optimum air flow, ensure that the air vents are free from obstructions. 10 VivoMini VC66 Series

****** Page 11 ****** Rear panel For and VC66R 00000 be•N 00000000 Q QOOQOOO 3 For VC66D 4 5 6 7 8 00000 o 0000 Kensington@ security slot 10 The Kensington@ security slot allows you to secure your VivoMini using Kensington@ compatible VivoMini security products. VivoMini VC66 Series 11

****** Page 12 ****** DVI Power input The bundled power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the VivoMini. To prevent damage to the VivoMini, always use the bundled power adapter. WARNING! The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body. DVI port This port allows you to connect your VivoMini to an external display. Serial (COM) connector The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers. HDMI port The HDMI (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on a larger external display. DisplayPort The DisplayPort sends high-performance digital output from your VivoMini to a display device such as an LCD TV or HD monitor. Intel@ LAN port The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. 12 SS-Q 3 port The USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate up to 5 Gbit/s and is backward compatible to USB 2.0. VivoMini VC66 Series

****** Page 13 ****** Memory card slot (only for VC66 and VC66R) This built-in memory card reader slot supports MMC, SD, SDHC, and SDXC card formats. Realtek DASH LAN port (only for VC66D) The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network and supports DASH function. VivoMini VC66 Series 13

****** Page 14 ****** 14 VivoMini VC66 Series

****** Page 15 ****** 2 Using your VivoMini

****** Page 16 ****** Getting started Connect the AC power adapter to your VivoMini To connect the AC power adapter to your VivoMini: A. B. C. Connect the power cord to the AC power adapter. Plug the AC power adapter into a 100VN240V power source. Connect the DC power connector into your VivoMini’s power (DC) input. IMPORTANT! 16 We strongly recommend that you use only the AC power cord that came with your VivoMini. We strongly recommend that you use a grounded wall socket while using your VivoMini. The socket outlet must be easily accessible and near your VivoMini. To disconnect your VivoMini from its main power supply, unplug your VivoMini from the power socket. Power adapter information: – Input voltage: 100-240Vac – Input frequency: 50-60Hz Rating output current: 6.32A max. (120W) / 9.23A max. (180W) Rating output voltage: 19V / 19.5V VivoMini VC66 Series

****** Page 17 ****** Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoMini. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoMini: Connect the USB cable from your keyboard and mouse to any of the USB ports of your VivoMini. NOTE: The illustrations in this section are for reference only and may vary per model. Connecting keyboard or mouse via USB port oooooooaoaaaoc:zaaoaoaa ooou noon VivoMini VC66 Series

****** Page 18 ****** 18 Connect a display panel to your VivoMini You can connect a display panel or projector to your VivoMini that has the following connectors: HDMI connector DisplayPort connector DVI connector To connect a display panel to your VivoMini: Connect a display cable either to the HDMI, DisplayPort or DVI port. NOTE: The illustrations in this section are for reference only and may vary per model. Connecting display via HDMI port Connecting display via DisplayPort VivoMini VC66 Series

****** Page 19 ****** Connecting display via DVI port VivoMini VC66 Series 19

****** Page 20 ****** Turn on your VivoMini Press the power button to turn on your VivoMjni. 20 VivoMiniVC66 Series

****** Page 21 ****** Turning your VivoMini off If your VivoMini is unresponsive, press and hold the power button for at least four (4) seconds until your VivoMini turns off. Putting your VivoMini to sleep To put your VivoMjni on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoMini. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance. Do not change the default BIOS settings except in the following circumstances: An error message appears on the screen during the system bootup and requests you to run the BIOS Setup. You have installed a new system component that requires further BIOS settings or update. WARNING! Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. VivoMini VC66 Series 21

****** Page 22 ****** 22 Quickly enter the BIOS To quickly enter the BIOS: Press the power button for at least four (4) seconds to shut down your VivoMini, then press the power button again to turn your VivoMini back on, then press or during POST. When your PC is off, disconnect the power cord from your VivoMini’s power connector. Reconnect the power cable and press the power button to turn on your VivoMini. Press or during POST. NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when you turn on your PC. Load default BIOS settings To load the default values for each of the parameters in your BIOS: Enter the BIOS by following the steps mentioned in the Quickly enter the BIOS section. Navigate to the Exit menu. Select the Load Optimized Defaults option, or you may press Select Yes to load the default BIOS values. VivoMini VC66 Series

****** Page 23 ****** Upgrading your VivoMini

****** Page 24 ****** Upgrading memory modules Your VivoMinj comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, 8GB, or 16GB DDR4 260-pin so-DIMMs for a maximum of 32GB memory. IMPORTANT! Refer to asus.com for the list of compatible DIMMs. You can only install DDR4 SO-DIMM to the VivoMini’s DIMM slots. NOTE: The illustrations in this section are for reference only and may vary per model. To install or upgrade the memory modules: 1. 2. 3. Turn off your VivoMjni then disconnect all cables and peripherals. Place the VivoMini on a flat stable surface, with its bottom side facing up. Using a flat-head screwdriver or straightened paper clip, remove the rubber feet from the sockets, then remove the four (4) screws securing the top cover. IMPORTANT! The rubber covers are designed to be attached to the bottom side. DO NOT force to detach it or completely remove it from the compartment cover. 8 8, 24 VivoMini VC66 Series

****** Page 25 ****** 4. 5. Lift and remove the top cover and set it aside. IMPORTANT! Remove the top cover carefully to prevent pulling on and causing damage to the cables connected. This may vary per model. Remove the screw from the HDD layer. VivoMini VC66 Series 25

****** Page 26 ****** 6. 7. Lift open the HDD layer. IMPORTANT! Lift the HDD layer carefully to prevent pulling on and causing damage to the cables connected. Align and insert the memory module into the slot and press it down (A) until the retaining clips snaps back into place and it is securely seated in place. Repeat the same steps to install the other memory module. 26 VivoMini VC66 Series

****** Page 27 ****** 8. 9. Replace the HDD layer. NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the HDD layer can be replaced successfully. Replace the screw to secure the HDD layer. VivoMini VC66 Series 27

****** Page 28 ****** 10. 11. Replace the top cover of your VivoMini NOTE: Ensure to organize the cables to prevent any damage to your VivoMini and to ensure the top cover can be replaced successfully. Reattach the screws to secure the cover back on the bottom side of the main box, then replace the rubber feet back on each screw hole. 28 VivoMini VC66 Series

****** Page 29 ****** Installing or upgrading the M.2 SSD NOTE: The illustrations in this section are for reference only and may vary per model. YourVjvoMini includes a M.2(NGFF) slot that supports a M.2 2280 SSD. To install or upgrade the M.2 SSD: 2. 3. Follow steps 1-6 under the Upgrading memory modules section to remove the top cover and HDD layer of yourVjvoMini. Align and insert the M.2 SSD into its slot inside the VivoMini, then secure it with a screw. Follow steps 8-11 under the Upgrading memory modules section to replace the top cover and HDD layer of your VivoMini. VivoMini VC66 Series 29

****** Page 30 ****** Installing or upgrading the wireless card NOTE: The illustrations in this section are for reference only and may vary per model. Your VivoMini includes a M.2(NGFF) slot that supports a M.2 2230 wireless and bluetooth module. To install or upgrade a wireless card: 2. 3. 4. Follow steps 1-6 under the Upgrading memory modules section to remove the top cover and HDD layer of your VivoMjnj. Align and insert the wireless card into its slot inside the VivoMini (A), then secure it with a screw (B). Connect the black antenna to MAIN or A and the white antenna to AUX or A on the wireless card (C). Follow steps 8-11 under the Upgrading memory modules section to replace the top cover and HDD layer of your VivoMini. 30 VivoMini VC66 Series

****** Page 31 ****** Installing 2.5″ HDD / SSD NOTE: The illustrations in this section are for reference only and may vary per model. This bay supports 7mm/9.5mm 2.5″ HDDs/SSDs. Some models may only support one (1) HDD/SSD. To install or upgrade the HDD / SSD: 2. 3. 4. Follow steps 1-4 under the Upgrading memory modules section to remove the top cover of your VivoMini. Remove four (4) screws from the HDD/SSD bracket. Remove the HDD/SSD bracket. Remove the cable from the holder, then remove the holder from the HDD/SSD bracket. VivoMini VC66 Series 31

****** Page 32 ****** 5. 6. 7. NOTE: Ensure to remove the holder from the bracket when installing an HDD/SDD to the bracket. The availablility of the holder may vary depending on the model type, country, or region. To install a new HDD/SSD, secure the HDD/SSD to the bracket using the bundled four (4) screws. Connect the cable to the HDD/SSD, then align the bracket to the HDD/SSD compartment of your VivoMini and secure the bracket with the screws previously removed. Follow steps 10-11 under the Upgrading memory modules section to replace the top cover of your VivoMini. 32 VivoMini VC66 Series

****** Page 33 ****** Appendix

****** Page 34 ****** 34 Safety information Your VivoMinl’ is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings. Use this product in environments with ambient temperatures between OOC and 350C. If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. VivoMini VC66 Series

****** Page 35 ****** Care during use Do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. The power cord or plug is damaged. Liquid has been spilled into the system. The system does not function properly even if you follow the operating instructions. The system was dropped or the cabinet is damaged. The system performance changes. Lithium-lon Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users DO NOT throw the VivoMini in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local technical support services for product recycling. VivoMini VC66 Series 35

****** Page 36 ****** 36 Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http:/lcsr.asus.comlengIish/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the 1/0 ports are located. Federal Communications Commission Statement This device complies with Part 1 5 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. VivoMini VC66 Series

****** Page 37 ****** If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. ISED Radiation Exposure Statement for Canada This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with ISED RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. Operation is subject to the following two conditions: This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device. VivoMini VC66 Series 37

****** Page 38 ****** Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus complies with Canadian ICES-003, RSS- 210, and CAN This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1 ) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003, RSS-210 et CAN Cet appareil est conforme aux normes CNR exemptes de licence d’lndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Wireless Operation Channel for Different Domains N. America Japan Europe ETSI 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.472 GHz Chol through CHI 1 Chol through Ch14 Chol through Ch13 38 Regional notice for Singapore Complies with IMDAStandards This ASUS product complies with IMDA Standards. DB103778 VivoMini VC66 Series

****** Page 39 ****** Regional notice for Malaysia MCMC CIDF15000026 Regional notice for California WARNING Cancer and Reproductive Harm – P65Warnings.ca.gov ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. ENERGY STAR All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity. To wake your computer, click the mouse or press any key on the keyboard. Please visit energystar.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit energystar.gov for detail information on the ENERGY STAR joint program. NOTE: Energy Star is NOT supported on FreeDOS and Linux-based products. VivoMini VC66 Series 39

****** Page 40 ****** ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 1 50, Li-Te Rd., Peitou, Taipei 1 1 2, Taiwan +886-2-2894-3447 +886-2-2890-7798 asus.com +86-21-3842-9911 +86-21-5866-8722, ext. 9101 # qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Web site Technical Support Support fax General support Online support 800 Corporate Way, Fremont, CA 94539, USA +1-510-739-3777 +1-510-608-4555 usa.asus.com +1-812-284-0883 +1-812-282-2787 qr.asus.com/techserv ASUS COMPUTER GmbH (Germany and Austria) 40 Address Fax Web site Online contact Technical Support Telephone Support Fax Online support Manufacturer Authorised representative in Europe VivoMini VC66 Series Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959931 asus.com/de eu-rma.asus.com/sales +49-2102-5789555 +49-2102-959911 qr.asus.com/techserv ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 4F, No. 150, II-TE RD., PEITOU, TAIPEI 112, TAIWAN ASUSTeK Computer GmbH Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY

****** Page 41 ****** DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 10776) Responsible Party Name: Address: Phone/’Fax No: Asus Computer International 800 Corporate Way, Fremont, CA 94539. hereby declares that the product Product Name : VivoMini Model Number : VC66,VC66R Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Representative Person’s Name : Signature . Date : Steve Chang / President Dec. 24 2016 Ver. 140331 VivoMini VC66 Series 41

****** Page 42 ****** DECLARATION OF CONFORMITY Per FCC 2 Section 2. 10770) Responsible Party Name: Address: Phone/Fax No: Asus Computer International 800 Corporate Way, Fremont, CA 94539. hereby declares that the product Product Name : VivoMini Model Number : VC66D Conforms to the following specifications: FCCPa1t 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (l) This device may not cause harmful interference, and (2) diis device must accept any interference received, including interference 42 that may cause undesirecl opaation. Representative Person’s Name Signature : Date : VivoMini VC66 Series Steve Chang / President May 12.2017 Ver. 140331


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ASUS VIVOMINI VC66R (01) PDF MANUAL

Leave a comment, question, review or page error below.

This site uses Akismet to reduce spam. Learn how your comment data is processed.