ASUS G22CH (01) PDF Document

To turn on your ASUS G22CH, first turn on your monitor. Then, press the power button on your ASUS G22CH. Wait until the operating system loads automatically.

The power button on the ASUS G22CH is used to turn on the computer.

To enable fast startup on your ASUS G22CH, enter Control Panel in the search bar and open it. Select View by: Category, select Hardware and Sound, then Power Options. Click Choose what the power button does, click Change settings that are currently unavailable, check Turn on fast startup (recommended), and click Save changes.

You can connect a USB storage device to the ASUS G22CH by inserting the device into the USB 3.2 Gen 2 Type-C, USB 3.2 Gen 2, USB 3.2 Gen 1, or USB 2.0 ports located on the top and rear panels of the ASUS G22CH.

To connect an external monitor to the ASUS G22CH using the ASUS Graphics Card, connect your monitor to a display output port on the discrete ASUS Graphics Card and plug the monitor into a power source.

To set up multiple displays on your ASUS G22CH, first turn off the computer. Connect the monitors to the ASUS G22CH and connect their power cords. Turn on the ASUS G22CH, go to the Start menu, click Settings, then System, then Display, and configure the settings for your displays.

The ASUS G22CH supports various audio configurations. Use the following table to identify port functions:

Port | Headset 2-channel | 4-channel | 5.1-channel | 7.1-channel

Line In port (Rear panel) | Line In | Rear Speaker Out | Rear Speaker Out | Rear Speaker Out

Line Out port (Rear panel) | Line Out | Front Speaker Out | Front Speaker Out | Front Speaker Out

Microphone port (Rear panel) | Mic In | Mic In | Bass/Center | Bass/Center

Audio combo jack (Front panel) | – | – | – | Side Speaker Out

To install memory in your ASUS G22CH, follow these steps:

1. Turn off the ASUS G22CH.

2. Unplug all cables.

3. Open the computer case.

4. Remove the thermal fan.

5. Locate an empty SO-DIMM socket.

6. Align the notch on the bottom edge of the memory module with the key of the SO-DIMM socket.

7. Insert the bottom edge of the module into the socket at an appropriate angle.

8. Push the module down until the retaining clips snap into place.

9. Install the thermal fan.

10. Close the computer case.

If your ASUS G22CH will not power on, check if the computer is properly connected, check if the wall outlet is functioning, and ensure that the Power Supply Unit is switched on.

If your ASUS G22CH hangs, try to close programs that are not responding by pressing Alt + Ctrl + Delete and selecting Task Manager, then choosing the unresponsive program and clicking End Task. If the keyboard is not responding, press and hold the power button on the chassis until the ASUS G22CH shuts down, then press the power button again to turn it on.

You can use the Windows recovery option on your ASUS G22CH to restore or undo changes to system settings. From the Start menu, click Settings, then Update & recovery, then Recovery, select Refresh your PC without affecting your files, and click Get started.

If you have no sound on your ASUS G22CH, ensure the speakers are connected to the correct Line out port. Check if the speakers have power and are turned on. Check the volume levels and ensure the system sounds are not muted in the Windows notification area.

If your ASUS G22CH cannot access the internet, ensure the LAN cable is securely connected. Check if the LAN LED is on; if not, try another cable. Ensure the ASUS G22CH is properly connected to your router or hub. Check your network settings or try reinstalling the LAN driver.

If your ASUS G22CH is noisy, ensure that the ASUS G22CH is in an area with good air flow and not overheating. Ensure you are using a compatible CPU fan. You may also try updating the BIOS to the latest version.