Free English APUTURE AMARAN AL-M9 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD APUTURE AMARAN AL-M9 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the safety and general instructions for using the APUTURE AMARAN AL-M9?
For security and proper operation of your APUTURE AMARAN AL-M9, please follow these instructions:
• Do not leave the product in excessive heat areas or expose it to moist conditions.
• Avoid storing the lamp where there are corrosive chemicals.
• If your product has a problem, please have it checked by an authorized service or agent. Malfunctions caused by unauthorized disassembling are not covered by the warranty.
• The product is certified by RoHS and CE. Please operate the product in full compliance with the operation standards.
What are the main components of the APUTURE AMARAN AL-M9 light?
The APUTURE AMARAN AL-M9 features the following components:
1. Lamp beads
2. Magnet column
3. USB Charging Port
4. Brightness “-” button
5. Brightness “+” button
6. Power switch
7. Indicator
What accessories are included with the APUTURE AMARAN AL-M9?
The APUTURE AMARAN AL-M9 comes with the following accessories:
• Diffuser
• Universal Adapter (including Fastener, Thumbscrew, and Cold Shoe)
• Carrying Case
• USB Charging Cable
• Product Manual
How do I install the diffuser and universal adapter on the APUTURE AMARAN AL-M9?
Follow these steps to install the accessories on your APUTURE AMARAN AL-M9:
1. Install the diffuser on the lamp body.
2. Place the lamp in the universal adapter, then fix the screw by turning it clockwise.
How can I mount the APUTURE AMARAN AL-M9 to a camera?
There are two primary ways to mount the APUTURE AMARAN AL-M9 to a camera:
1. Install the lamp with the included cold shoe adapter onto your camera’s cold shoe mount.
2. Disassemble the cold shoe from the universal adapter. Then, use the thumbscrew to install the lamp directly into your camera’s 1/4 inch screw hole.
The lamp can also be used handheld.
How do I charge the APUTURE AMARAN AL-M9 and what do the indicator lights mean?
To charge the APUTURE AMARAN AL-M9, connect the USB charging cable to the DC 5V port on the light.
The indicator light status is as follows:
• The indicator lights red while charging.
• The indicator goes off when the lamp is fully charged.
• The indicator flashes red a few times when the battery is low, and the lamp will automatically shut down.
• The indicator lights blue during working time (when the lamp is on).
How do I turn the APUTURE AMARAN AL-M9 on/off and adjust the brightness?
Power ON/OFF:
Use the power switch on the side of the unit to turn it ON or OFF.
Adjust the Brightness:
• Short press the “+” and “-” buttons to change the brightness in steps.
• Long press the “+” or “-” buttons to switch the brightness quickly.
What are the technical specifications for the APUTURE AMARAN AL-M9?
| Color Temperature | 5500±200K | |||
| CRI | >95 | |||
| TLCI | >95 | |||
| Illuminance | Distance | 0.3 m | 0.5 m | 1 m |
| Brightness | ≥900LUX | ≥350LUX | ≥80LUX | |
| Number of LEDs | 9 | |||
| Battery Type | Lithium-polymer battery (3.7V 1800mAh) | |||
| Voltage | DC 5V | |||
| Current | 1A | |||
| Battery Working Time | >1.75h (maximum brightness) | |||
| Dimension | 87*56*11 mm | |||
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD APUTURE AMARAN AL-M9 (01) PDF DOCUMENT