Free English ANSMANN WL400R SLIM (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ANSMANN WL400R SLIM (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the main components of the ANSMANN WL400R SLIM?
The ANSMANN WL400R SLIM consists of the following parts:
1. On/off button
2. 180 degree swivelling stand and holder with integrated magnets
3. COB LED
4. Belt clip
5. Top LED
6. LED status display
7. Charge socket with a rubber cover
8. 360 degree rotating hook
How do I operate the light modes on my ANSMANN WL400R SLIM?
The ANSMANN WL400R SLIM is operated using the On/Off button. Pressing the button cycles through the functions in the following order:
1. Spot-Light
2. COB-LED 25%
3. COB-LED 100%
4. Off
How do I charge the ANSMANN WL400R SLIM?
To charge the ANSMANN WL400R SLIM, follow these steps:
Step 1. Ensure the battery pack is fully charged before the first use.
Step 2. Open the rubber cover of the charge socket and connect a compatible Type C charging cable (5V DC / 1A).
Step 3. Monitor the LED status display. A flashing green LED indicates that the device is charging. A solid green LED indicates that the battery is fully charged.
Step 4. Once fully charged, disconnect the device from the charger.
Note: Simultaneous charging and lighting is not possible with this device.
What do the LED status indicators mean on the ANSMANN WL400R SLIM?
The ANSMANN WL400R SLIM provides battery capacity indications briefly after switching on and during the charging process:
Battery Status Indications:
Green: approximately 100 to 70% capacity remaining.
Orange: approximately 70 to 20% capacity remaining.
Red: approximately 20 to 10% capacity remaining.
Flashing Red: less than 10% capacity remaining.
Charging Indications:
Flashing Green LED: The device is currently charging.
Solid Green LED: The rechargeable battery is full.
What are the technical specifications for the ANSMANN WL400R SLIM?
The technical specifications for the ANSMANN WL400R SLIM are as follows:
| LED Type (Main) | 4W SMD LED (CRI >= 80 Ra, 6500 K) |
| LED Type (Spot) | 2W LED (CRI >= 75 Ra, 7000 K) |
| Battery Type | Li-Po 3.7 V | 1500 mAh | 5.55 Wh |
| Charging Input | Type C (5 V DC | 1 A) |
| Protection Class | IP65 (Water/Dust), IK07 (Impact) |
| Operating Temperature | -10 degrees Celsius to 40 degrees Celsius |
| Storage Temperature | -20 degrees Celsius to 55 degrees Celsius |
| Dimensions | 121 x 60 x 26 mm |
| Weight | 132 g |
What are the performance metrics for the different light modes of the ANSMANN WL400R SLIM?
The performance metrics for the ANSMANN WL400R SLIM light modes are detailed below:
| Mode | Brightness | Runtime | Beam Distance | Lux (at 0.5m) |
|---|---|---|---|---|
| Main LED (100%) | 400 lm | 2.5 hours | 25 m | 630 lx |
| Main LED (25%) | 150 lm | 6 hours | 25 m | 630 lx |
| Spot LED | 120 lm | 6 hours | 8 m | 200 lx |
How should I maintain the battery of my ANSMANN WL400R SLIM if it is not in use?
If the ANSMANN WL400R SLIM is not going to be used for an extended period, you must charge the rechargeable battery pack before storage to prevent deep discharge. This charging process should be repeated every six months to maintain the service life of the battery.
What safety precautions must be taken when using the ANSMANN WL400R SLIM?
To ensure safe operation of the ANSMANN WL400R SLIM, please adhere to the following safety guidelines:
1. Avoid eye injuries by never looking directly into the beam of light or shining it into other people’s faces.
2. Keep the product and packaging away from children, as it is not a toy.
3. All illuminated objects must be at least 10cm away from the lamp.
4. Only charge the product in closed, dry, and spacious rooms away from combustible materials and liquids.
5. Never submerge the product in water or other liquids.
6. Do not cover the product while in use to avoid the risk of fire.
7. Do not expose the product to extreme conditions such as extreme heat, cold, or fire.
8. Charge the lamp on a fireproof surface and only under constant supervision of an adult.
What should I do if the battery in my ANSMANN WL400R SLIM leaks?
Leaking battery fluid can cause irritation if it comes into contact with the skin. If the power source of your ANSMANN WL400R SLIM leaks, remove the liquid using protective gloves and a dry cloth. Immediately rinse any affected skin areas with fresh water and seek medical attention.
CLICK HERE TO DOWNLOAD ANSMANN WL400R SLIM (01) PDF DOCUMENT