Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** DXZC and DXZ4 PCoIP zero clients auick Start Guide series A This guide is for all RJ45 and SFP zero clients: DXZ4, DXZ4-M, DXZ4-A, DXZ4-AM, Dxzc, DXZC-M, DXZC-A, DXZC-AM, DXZC-E, DXZC-EM. This guide is also for the card-reader models: DXZC-C, DXZC-M, DXZC-MC, DXZC-EC, DXZC-EMC, DXZC-AC and DXZC-AMC. All models are supplied with a PSU and power cable. Note: This guide refers to all models as ‘zero client’ unless a model is specified. Pictures shown may vary from the model you have. Before you start Make sure a remote PCoIP host is available. Know the IP address or DNS name of the physical host, or server address for virtual hosts. STEP 1: Connect the Keyboard, Mouse and optional Headphones (DXZ4, DXZC) or Headset (DXZC) ports SFP Modules (for SFP only) Network Ports (SFP or RJ45) LANIWAN connection Video Ports Power Supply Unit *See manufacturer’s instructions before connecting USB devices STEP 2: Connect Monitors, Speakers, Network and Power 1. Connect at least one monitor, SFP modules if required, network cable and power supply (PSU). Use only the PSU supplied with the unit. 2. Connect speakers (not supplied) if required. STEP 3: Power on the unit 1. Press the POWER/MENU button. 2. Turn on the monitor(s). Note: DXZ4 model shown. DXZC models have two video ports and one network port.
****** Page 2 ****** STEP 4: Connect to a host Choose a connection type (optional) 1. To change the connection type, select Options > Configurations > Sessions. 2. Click Unlock and enter the default password ahkdante. To connect directly to a PCoIP host (Direct to Host + SLP discovery) 1. 2. Click the Connect button. The message ‘Discovering hosts’, followed by a list of available hosts appears. Select the chosen PCoIP host from the list and click 0K. The Connect button is greyed out until the zero client has a network connection and an IP address. AMULET’ HOTKEY Connect additional peripherals There is a minimum of one USB port and a maximum of six USB ports to the rear of the zero client, depending on the model. Check the manufacturer’s instructions before you connect any peripherals. Integral USB card-reader (DXZC-C series) Some DXZC models have an integral card reader. The reader supports CAC and SIPRNet tokens, ISO 7816 and EMV 2000 Level 1, and is compatible with 5v, 3v and 1.8v smart cards. The LED will be green under normal operation. To connect to a virtual desktop (View Connection Server) 1. Set the connection type to View Connection Server or View Connection Server + Auto Logon. 2. Enter the address of the View Connection Server. Setup complete – If you successfully connect, these indications are present: PCoIP LED DXZ4 series DEVICE LED PCoIP LED DXZC series LINK LED SPEED LED I. Chip facing down 2. Chip to the front Technical Support I. Chip facing up 2. Chip to the rear All models Note: PCoIP LED is blue for fiber connections. 02019 Amulet Hotkey Ltd. All rights reserved. Information in this document is subject to change. No part of this document may be reproduced through any means without permission from Amulet Hotkey Ltd. PC-over-IP, PCoIP and the PCoIP logo are registered trademarks of Teradici Corp. Amulet Hotkey is a registered trademark of Amulet Hotkey Ltd. amulethotkey.com For the user manual, downloads and technical support, visit: amulethotkey.com/support Refer all servicing to qualified personnel. For details of our other products, see our website amulethotkey.com. QS-DXZC-C002 vl.o June 2019
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL