FREE ENGLISH ALIENWARE AW2720HF (02) PDF DOCUMENT.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF USER GUIDE.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF USER MANUAL.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF OWNER GUIDE.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF OWNER MANUAL.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF REFERENCE GUIDE.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF INSTRUCTION GUIDE.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF REFERENCE MANUAL.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF INSTRUCTION MANUAL.
FREE ENGLISH ALIENWARE AW2720HF (02) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD ALIENWARE AW2720HF (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I assemble the stand for my ALIENWARE AW2720HF monitor?
1. Unpack the stand riser and the stand base from the box.
2. Attach the stand base to the stand riser.
3. Secure the base by turning the screw on the bottom of the stand base until it is tight.
How do I attach the assembled stand to the ALIENWARE AW2720HF monitor?
1. With the monitor screen facing down in the packaging, align the tabs of the stand assembly with the slots on the back of the monitor.
2. Press down on the stand until it snaps firmly into place.
How do I connect cables to my ALIENWARE AW2720HF?
1. Locate the port panel on the back of the monitor.
2. Connect the power cable to the power port.
3. Connect the square end of the USB upstream cable to the corresponding SS USB port.
4. Connect either an HDMI cable to the HDMI 1 or HDMI 2 port, or a DisplayPort (DP) cable to the DP port for your video signal.
5. Route the cables through the cable management opening in the stand.
6. Lift the monitor from the box and place it on your desk.
7. Attach the rear cable cover by snapping it into place over the connection ports.
How do I connect the ALIENWARE AW2720HF monitor to my computer and a power source?
1. Plug the power cord from the monitor into a wall outlet.
2. Connect the rectangular end of the USB upstream cable to a USB port on your computer.
3. Connect the other end of your chosen video cable (HDMI or DisplayPort) to the corresponding port on your computer.
How do I turn on the ALIENWARE AW2720HF monitor?
Press the power button located on the bottom right of the monitor bezel to turn it on.
How can I adjust the position of my ALIENWARE AW2720HF monitor?
The monitor stand allows for several adjustments:
Tilt: You can tilt the screen 5° forward or 21° backward.
Swivel: You can swivel the screen 20° to the left and 20° to the right.
Height: You can adjust the height of the monitor within a 130 mm range.
Pivot: You can rotate the screen 90° clockwise or counter-clockwise to use it in portrait orientation.
CLICK HERE TO DOWNLOAD ALIENWARE AW2720HF (02) PDF DOCUMENT