FREE ENGLISH AERPRO APDB1 (01) PDF DOCUMENT.
FREE ENGLISH AERPRO APDB1 (01) PDF USER GUIDE.
FREE ENGLISH AERPRO APDB1 (01) PDF USER MANUAL.
FREE ENGLISH AERPRO APDB1 (01) PDF OWNER GUIDE.
FREE ENGLISH AERPRO APDB1 (01) PDF OWNER MANUAL.
FREE ENGLISH AERPRO APDB1 (01) PDF REFERENCE GUIDE.
FREE ENGLISH AERPRO APDB1 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH AERPRO APDB1 (01) PDF REFERENCE MANUAL.
FREE ENGLISH AERPRO APDB1 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH AERPRO APDB1 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD AERPRO APDB1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the parts of the dust blower?
1. Air outlet
2. Power button
3. LED display screen/Charging indicator
4. Air inlet
5. TYPE-C Charging Port
How do I operate the dust blower?
Use the Power button for operation:
To power on: Press and hold for two seconds.
To cycle speeds: After powering on, press the button again to cycle between speeds (low/medium/high).
To power off: Press and hold for three seconds.
The speed levels displayed on the screen are:
L1: Low Airflow (60,000 RPM)
L2: Medium Airflow (90,000 RPM)
L3: High Airflow (130,000 RPM)
What precautions should be taken before operating the dust blower?
Before use, please confirm whether all parts are assembled correctly as displayed.
Please fully charge this device before using it for the first time. After use fully charge before storing. Once fully charged all four indicator lights remain on.
Note do not leave the product unattended whilst charging.
The product cannot be turned on during the charging process.
This product is not waterproof. Use with care in wet environments (e.g. car detailing) to avoid liquid exposure.
If any abnormal noises are heard during use, it should be immediately stopped. Please contact Technical Assistance for more information.
Please store in a cool place when not in use, avoid direct sunlight and temperature exceeding 60° C to avoid the risk of fire.
How do I install the blowing nozzle?
To install the blowing nozzle, attach it to the air outlet of the device.
What do the indicators on the display screen mean?
During charging, 4 indicator lights represent the battery level display.
The progress bar scrolls during charging.
The fan icon rotates when in use.
How do I charge the dust blower?
Please fully charge this device before using it for the first time. After use, fully charge before storing.
Using the standard TYPE-C charging cable, this product supports fast charging. Please choose a charger that supports fast charging which can shorten charging time. If it is a regular USB charger, it is recommended to use a charger with an output voltage of 5V and a current of 3A or above to charge this product.
Connect the supplied USB charging cable with TYPE-C interface to the rear charging socket (⑤).
When charging, the display screen lights up. When it is fully charged the 4 indicator bars will light up. After the product has been used for a long time, allow 10 minutes to cool down before storing.
What are the technical parameters of the device?
| Product | Dust Blower |
| Item Number | APDB1 |
| Motor | High speed brushless motor |
| RPM | 130000 RPM |
| Rated power | 150W |
| Battery model | 18650 Lithium battery |
| Battery capacity | 2500mAh*2 |
| Rated voltage | 7.4V |
| Airflow level (RPM) | 60000 (Low)/90000 (Medium)/130000 (High) |
| Charging time | About 2.5H |
| Working time (Approx) | L1 (Low) about 28 minutes; L2 (Medium) about 16 minutes; L3 (High) about 12 minutes |
| Power Input | 5V/3A |
| Charging port | TYPE-C |
| Net weight | About 296g |
| Product size | 138*178MM |
How should I clean and maintain the dust blower?
Please turn off the power during cleaning and maintenance.
When using, please be careful not to have foreign objects in the air inlet of the product to prevent debris from entering the inlet motor and damaging the motor and or blades.
Please clean the mesh on the air inlet if it is dusty.
Use a clean brush (Toothbrush).
When wiping and cleaning do not use chemical liquids.
Do not use the product if it is not functioning correctly.
CLICK HERE TO DOWNLOAD AERPRO APDB1 (01) PDF DOCUMENT