Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER M1P1108 HE-802 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Acer Projector H6500/E-140/HE-802 Series User’s Guide

****** Page 2 ****** Copyright 0 2011. Acer Incorporated. All Rights Reserved. Acer Projector H6500/E-140/HE-802 Series User’s Guide Original Issue: 09/2011 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transm itted, in any form or by any means, electron ically, mechan ically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector H6500/E-140/HE-802 Series Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes on ly and belong to their respective companies. ” HDMITM, the HDMI logo and High-Defin ition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

****** Page 3 ****** ili Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating. This product’s AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length.

****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the lamp is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten ing the life span and darkening the image. Locations near fire alarms. Locations with an ambient temperature above 40 00104 OF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

****** Page 6 ****** might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Reset the i’ Lamp Hour Reset” function from the Onscreen display “Management” menu after replacing the lamp module. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

****** Page 7 ****** Vli Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can’t hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/ Sustainability/sustainability01. htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org

****** Page 8 ****** VIII First things first Usage Notes Turn off the product before cleaning Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as th is may cause electric shock. When changing the lamp, please allow unit to cool down, and follow all changing instructions. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the “Lamp Hour Reset” function from the Onscreen display ” Management” menu after replacing the lamp module. When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”

****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Management Setting Timer Language Appendices Troubleshooting iii viii VIII VIII 1 1 2 3 3 4 5 7 7 8 8 9 10 10 11 13 15 15 16 17 18 20 21 23 25 25 26 26

****** Page 10 ****** LED & Alarm Definition Listing Replacing and cleaning the dust filters Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices 30 31 32 33 36 38 42

****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include. • • DLP@ technology Native 1920 x 1080 1080p resolution 4:3 / 16:9 / L.Box aspect ratio supported Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images Acer ColorSafe II technology ensures consistent color rendition over time. High brightness and contrast ratio Versatile display modes (Bright, Presentation, Standard, Movie, Dark Cinema, Game, Sports, User) enable optimum performance in any situation NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower Management) for easy adjustment of settings Equipped with HDMITM connection supporting HDCP Advanced digital keystone correction optimizes presentations Smart detection delivers quick, intelligent source detection. Multi-language onscreen display (OSD) menus Full-function remote control Manual focus projection lens zooms up to 1.2x 8x digital zoom and pan move function Microsoft@ Windows@ 2000, XP, Vista@, Windows@ 7, OS compliant

****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Acet Prciectcr Card Security card Quick start guide Dust filters (Option) Power cord User’s guide 2 x Batteries VGA cable öööö QQQQ 0000 Remote control Carrying case

****** Page 13 ****** Projector Overview Projector Outlook Front / upper side 7 2 3 Description 6 8 9 3 7 5 1 2 3 4 5 Control panel Ventilation (inlet) Ventilation (outlet) Elevator button Elevator foot 4 10 6 7 8 9 10 5 6 7 8 9 escriptlon Zoom lever Remote control receivers Focus ring Zoom lens Lens cap Rear side 2 1 escriptlon Power socket USB connector 3 4 6 7 8 9 escriptlon 2 3 4 5 PC analog signal/HDTV/component video input connector (VGA IN) YPbPrNCbCr input connector Composite video input connector HDMI 1 connector HDMI 2 connector 12V DC output connector KensingtonTM lock port

****** Page 14 ****** 4 Control Panel 2 3 4 5 LAMP RESYNC TEMP SOURCE MENU 6 7 8 10 9 2 1 2 3 4 5 6 7 8 9 10 con d) un LAMP Keystone RESYNC MENU POWER TEMP Ion Four directional select keys SOURCE Empowering key Remote control receiver escriptlon Lamp Indicator LED Adjusts the image to compensate for distortion caused by tilting the projector (± 15 degrees). Automatically synchronizes the projector to the input source. Press “MENU ” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. See the contents in “Turning the Projector On/Off” section. Temp Indicator LED Use to select items or make adjustments to your selection. Changes the active source. Unique Acer functions: eView, eTimer, ePower Management. Receives signals from remote control

****** Page 15 ****** 5 Remote Control Layout 6 7 8 10 13 25 unction con FREEZE SOUÄ’Cf 1 4 5 9 26 11 12 1 113-492 I acer ei 19 20 23 24 escri tion 2 3 4 5 6 7 8 9 10 12 13 14 15 Infrared transm itter FREEZE HIDE RESYNC SOURCE POWER ASPECT RATIO ZOOM Sends signals to the projector. To pause t e screen mage. Momentari y turnso t e VI eo. Press “HIDE” to I et e image, press again to display the image. Automatica y sync romzest e proJector tot e Input source. C angest e active source. Re er tot e “Turning t e ProJectorOn/O ” section. To ooset e eslre aspect ratio Auto/4:3/16:9/L.Box Zooms t e projector Isp ay In or out. Empowering ey Umque Acer unctions: eVlew, eTmer, ePower Management. KEYSTONE A Justst e Image to compensate or Istorüon cause y tilting the projector (± 15 degrees). MENU • Press “MENU” to aunc t e Onscreen Isp ay OSD menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. No function. 00 PAGE RGB Press “R B” or true-co or optimization. BRIGHTNESS Press “BRI HTNESS” toa just t e rig tnesso t e mage. CONTRAST Use t e “CONTRAST” option to contro t e I erence between the lightest and darkest parts of the picture.

****** Page 16 ****** 6 16 17 18 19 20 21 22 23 24 25 26 con unction COLOR VGA COMPONENT S-VIDEO VIDEO DVI HD M ITM MUTE WIRELESS KeyPa Four Irecüona select keys escri tion Press “COLOR” to adjust the color temperature of image. Press “VGA” to change source to the VGA connector. This connector supports analog RGB, YPbPr (480pß76p/720p/ 1080i), YCbCr (480iß76i) and RGBsync. Press “COMPONENT” to c ange source to Component VI eo. This connection supports YPbPr (480p/576p/720p/1080p) and YCbCr (480iß76i/1080i). No unction. To ange source to COMPOSITE VIDEO. No unction. To ange source to HDMITM No unction. No unction. Press “0-9” to Input a passwor Int e “Security settings”. Use up, own, e , rig t uttonsto se ect Items or ma e adjustments to your selection. Note: When PIP function is activated, zoom and keystone function is unavailable. Model No: A-2607 NOTICE Rating; DC 3V 60mA MAX ELECTRONICS VZ-J6/OO.002

****** Page 17 ****** 7 Getting Started Connecting the Projector DVD player, – O Set-top Box, HDTV receiver Video Output D-Sub 3 2 5 4 iii adaptor D-Sub 1 5 Description 1 2 3 4 6 1 5 6 7 8 8 1 Ot our Power cord USB cable VGA cable VGA to component/HDTV adapter HDMI 7 HDMI DVD player, Set-top Box, HDTV receiver Description 3 RCA component cable Composite video cable HDMI cable 12V DC Cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

****** Page 18 ****** 8 Turning the Projector On/Off Turning on the Projector 1 2 3 4 Remove the lens cap.(lllustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red Turn on the projector by pressing ” Power” button on the control panel, and the Power indicator LED will turn blue.(lllustration #2) Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays ” Lock” and “Source” icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays “No Signal”, please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the “Source” button on either control panel or the remote control or direct source key on the remote control to switch between inputs. 2 Power button G) 1 Lens cap

****** Page 19 ****** 9 Turning the projector off 1 2 3 4 5 To turn the projector off, press the power button. This message appears: ” Please press the power button again to complete the shutdown process. ” Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2- minute shutdown process. Once the system has finished cooling, the LED power indicator will stop blinking and turn solid red to indicate standby mode. It is now safe to unplug the power cord Warning indicators: ” Projector Overheated. Lamp will automatically turn off soon. ” This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center. ” Fan failed. Lamp will automatically turn off soon.” This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center.

****** Page 20 ****** 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: Press the elevator foot release. (Illustration #1) 1 Raise the image to the desired height angle (Illustration #2), then release 2 the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. To lower the image: 1 2 3 Press the elevator foot release. (Illustration #1) Lower the image to the desired height angle (Illustration #2) , then release the button to lock the elevator foot into position. Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. 1 Elevator foot release button 3 Tilt adjusting wheel 2 Elevator foot

****** Page 21 ****** 11 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 75″ and 90″ Note: Remind as below figure, the space of 131 cm height is required when located at 3m distance. screen Size Height: 13 lcm Form base to top of image Heigh 109cm 3m Desired Distance Figure: Fixed distance with different zoom and screen size.

****** Page 22 ****** 12 Screen size Desired (Min zoom) Distance Top From base Screen size (Max zoom) (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 Diagonal Diagonal to top of (inch) W (cm)x H (cm) (inch) W (cm)x H (cm) 38 50 63 75 88 100 113 125 151 176 201 226 251 83 x 47 111 x63 139 x 78 167 x 94 194 x 109 222 x 125 250x 141 278x 156 333 x 188 389 x 219 444 x 250 500 x 281 556 x 313 image (cm) 54 73 91 109 127 145 163 181 218 254 290 326 363 45 60 75 90 105 120 136 151 181 211 241 271 301 100 x 56 133 x 75 167 x 94 200 x 113 233 x 131 267 x 150 300 x 169 333 x 188 400 x 225 467 x 263 533 x 300 600 x 338 667 x375 Top From base to top of image (cm) 65 87 109 131 152 174 196 218 261 305 348 392 435 Zoom Ratio: 1.2x

****** Page 23 ****** 13 How to get a preferred image size by adjusting distance and zoom 60 ” Desired mage size Desired Distance Height: 87cm Form base to top of image 2.4 m c The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 60″ set the projector at a distance 2.0 m and 2.4 m from the screen and adjust the zoom level accordingly.

****** Page 24 ****** 14 Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.2x Max zoom W (cm) x H (cm) 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199 x 112 221 x 125 266 x 149 332 x 187 398 x 224 443 x 249 553k 311 664 x 374 1.0 1.3 2.0 2.3 2.8 2.7 3.2 3.0 3.6 3.3 4.0 40 4.8 5.0 6.0 6.0 7.2 6.6 Min zoom 1.2 1.6 2.0 2.4 8.0 10.0 8.3 10.0 Top (cm) From base to top of Image 43 58 72 87 101 116 130 144 173 217 260 289 361 433

****** Page 25 ****** 15 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message ” No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more. 1 Turn on the projector by pressing “Power” button on the control pad 2 Press the “MENU” button on the control pad to launch the OSD for projector installation and maintenance. Installation staliatlø Projection Menu Location keystone Linguage Select EngEsh Press »Entet 3 4 5 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. The Installation menu includes the following options: •Projection method •Projection location •Menu location •Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.

****** Page 26 ****** 16 Acer Empowering Technology Empowering @ Key mpowcering technology Empowering Key Settings Acer eView Manag ement Acer eTimer Management Acer •Power Management Acer eView Management mpowering technology Acer eView Management CIJ Bright Presentation Standard Movie Dark Cinema Game Sports user cere mer anagement mpowering technology Acer eTimer Management Display cere ower anagement ‘C mpowering technology Acer ePower Management Eco High Altitude O Auto Shutd0*an Acer Empower Ing Key provl e t ree Acer unique functions, they are ” Acer eView Management”, “Acer eTimer Management” and ” Acer ePower Management” respectively. Press key for more than one second to launch the Onscreen display main menu to modify its function. “@i’ to launch ” Acer eView Press Management” submenu. JJ Acer eView Management” is for display mode selection. Please refer to Onscreen Display Menus section for more detail to launch “Acer eTimer Press Management” submenu. JJ Acer eTimer Management” provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail. to launch ” Acer ePower Press Management” JJ Acer ePower Management” provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail.

****** Page 27 ****** 17 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control or control panel. When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the keys to select the desired item and adjust the settings by using the keys. Select the next item to be adjusted in the submenu and adjust as described above. Press “MENU ” on the remote control or control panel, the screen will return to the main menu. To exit OSD, press “MENU” on the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu mec Color Display Mode wall color Brightness Contrast Color Temperature Degamma Advanced Color Management Saturation Tint MI Color Range Select Sub menu a Movie Press Press Auto Exit MENU 50 50 Setting 9 50 50 Enter

****** Page 28 ****** 18 Color Display Mode Wall Color Brightness Contrast Color Temperature Degamma olor Brightness Color Temperature Oegemma gm•nced Color Salutation Tirt HDMI COIOI Select Press Prus There are many factory presets optimized for various types of mages. Bright: For brightness optimization. Presentation: For meeting presentation with higher brightness. Standard: For common environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Sports: For sport picture. User: Memorize user’s settings. Use th is function to choose a proper color according to the wall There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. to darken image. Press to lighten the image. Press “Contrast” controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. to decrease the contrast. Press to increase the contrast. Press Adjust the color temperature. At h igher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter.

****** Page 29 ****** Advanced Ad vanc•d Color Management Saturation Tint HDMI Color Range 19 Noise Reduction Adjusts signal noise reduction.” 0″ means the noise reduction is off, 11>0″ increase noise reduction. Sharpeness Adjusts the sharpness of the image. to decrease the sharpness. Press to increase the sharpness. Press Brilliant Color Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. This feature is “On ” by default. Dynam ic Black Choose “On ” to automatically optim ize the display of dark movie scenes enabling them to be shown in incredible detail. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. Color C Adjusts the cyan color. Color Y Adjusts the yellow color. Color M Adjusts the magenta color. Skin Color Adjusts the skin color. Adjusts a video image from black and white to fully saturated color. to decrease the amount of color in the image. Press to increase the amount of color in the image. Press Adjusts the color balance of red and green. to increase the amount of green in the image. Press to increase the amount of red in the image. Press Adjust the color range of the HDMI image data to correct color display error. Auto: Automatically adjust by information from player. Lim ited Range: Prosess the input image as lim ited color range data. Full Range: Prosess the input image as full color range data Note: “Saturation” and “Tint” functions are not supported under computer mode or HDMI mode. Note: “HDMI Color Range” function is only supported under HDMI mode.

****** Page 30 ****** 20 Image Projection Aspect Ratio Keystone Image Projacticn H, Position Frequency Sean Select Auto 1629 Front • The factory defau It setting. Ceiling • When you select th is function, the projector inverts the image for ceiling-mounted projection. Rear • When you select this function, the projector reverses the image so you can project from beh ind a translucent screen. Rear-Ceiling When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Use this function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. L. Box: Keep original signal aspect ratio and zoom in by 1.333 times. Adjust image distortion caused by tilting projection. (± 15 degrees)

****** Page 31 ****** H. Position (Horizontal position) V. Position (Vertical position) Frequency Tracking HDMI Scan Info 21 to move the image left. Press to to move the image right. Press to move the image down. Press to move the image up. Press ” Frequency” changes the projector’s refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use th is function to make the necessary adjustments. Synchronizes the signal tim ing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjust the overscan ratio of the HDMI image on screen. • Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image. “H. Position ‘I, “V. Position “Frequency” and “Tracking” functions Note: are not supported under HDMI or Video mode. Note: “HDMI Scan Info” function is only supported under HDMI mode. Management anagemen Ellipse Fnlet’ Press Exit ECO Mode High Altitude Auto Shutdown Turn Off Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose “Off” to return normal mode. Choose “On” to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. The projector will automatically shutdown when there is no signal input after the allocated time. (in minutes) Standard: Properly shuts down the projector after fan cooling. Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes.

****** Page 32 ****** 22 Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Displays the lamp’s elapsed operating time (in hours). Activate th is function to display a reminder to change the lamp 30 hours before its expected end-of-life. Press the button and choose “Yes” to turn the lamp hour counter to 0 hours.

****** Page 33 ****** 23 Setting Menu Location Closed Caption Security Setting LOC Closed C.eption Au’lc PIP source PIP ‘-ocstion Press Composite 3m*ll Choose the menu location on the display screen. Selects a preferred closed caption ing mode from CCI, CC2, CC3, CC4, (CCI displays captions in the primary language in your area). Select “Off” to turn off the caption ing feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. Th is function is not available when the aspect ratio is ” 16:9″ or “Auto” . Security This projector provides a useful security function for the adm inistrator to manage usage of the projector . to change the “Security” setting. Ifthe security function is Press enabled, your must enter the “Admin istrator Password first before changing the security settings. Select “On ” to enable the security function. The user has to enter a password to operate the projector. Please refer to the “User Password” section for details. If “Off” is selected, then the user can turn on the projector without password. Timeout(Min.) Once “Security” is activated to “On” , the administrator can set timeout function. to select the timeout interval. Press The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of “Timeout(Min.)” is “Off” . Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both ” User Password” and “Administrator Password” can be accepted for this dialogue. Note: For 1080P models, to get best quality for you desired image, suggest end-user set PC resolution to 1920 x 1080 before you use this function.

****** Page 34 ****** 24 sot user Password sat password Auto Screen Reset PIP PIP Source PIP Location PIP Size User password to setup or change the ” User Password . Press Press number keys to set your password on the remote control and press “MENU” to confirm. to delete character. Press Enter the password when you see “Confirm Password” displayed. The password should be between 4 and 8 characters long. If you select “Request password only when plugging the power cord in. the projector will prompt the user to enter the password every time the power cord is plugged. If you select “Always request the password when turn ing the projector on.”, the user has to enter the password every time when the projector is turned on. Admin istrator Password The “Administrator Password” can be used in both the ” Enter Administrator Password” and ” Enter Password” dialog boxes. to change the “Administrator Password” . Press The factory default of “Admin istrator Password” is ” 1234″ . If you forgot your administrator password, do the following to retrieve the adm inistrator password: An unique 6-digit “Universal Password” which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Adm inistrator Password is. If losing th is security card and number, please contact with an Acer service center. Default is “On “, the down/up move of electronic screen will be related with power on/off of Projector. Press the button and choose “Yes” to return the parameters on all menus to the factory default settings. Choose “On ” to see two screens at the same time. Choose “Off” to disable the function. and to choose the secondary video source: Composite, Press S-Video or Component signal. Choose the PIP secondary signal location on the disp lay screen. Choose the PIP secondary signal size on the display screen. Note: When PIP function is activated, zoom and keystone function is unavailable. PIP Source” , ” PIP Location” and “PIP Size” functions Note: are only supported under HDMI mode.

****** Page 35 ****** 25 Timer Timer Location Timer Start Timer Period Timer Display Language Language Timer Tirn•yt Start Timer Select Enter Press C Minutes Courid5wn Csit MINU Choose the location of the timer on the screen. to start or stop the timer. Press to adjust the timer period. Press to which timer mode to display on the Press screen. anguage 5 English oans’Å Oeutsch Eso•aol I taliano Magyar ands rortugues Nam Choose the mu Itilingual OSD menu. Use the select your preferred menu language. to confirm the selection. Press U key to

****** Page 36 ****** 26 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image(For PC (Windows 2000/ XPNistaM/indows 7)) Solution Connected as described in the “Getting Started section. Ensure none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Please refer to the “Replacing the Lamp” section. Make sure you have removed the lens cap and the projector is switched on. Press “RESYNC” on the remote control or control panel. For an incorrectly displayed image: Open “My Computer,” open the “Control Panel,” and then double-click the “Display” Icon. Select the “Settings” tab. Verify that your display resolution setting is lower than or equal to UXGA (1600 x 1200). Click the “Advanced Properties” button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to UXGA (1600 x 1200). Click the “Change” button under the “Monitor” tab. Click “Show all devices”. Next, select “Standard monitor types” under the SP box, and choose the resolution mode you need under the “Models” box. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 1200).

****** Page 37 ****** 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation lmaqe is unstable or ffickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a “widescreen ” DVD title 27 Press “RESYNC” on the remote control or control panel. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq Dell Gateway IBM HP NEC Toshiba ] If you experience difficu Ity changing resolutions or your mon itor freezes, restart all equipment including the projector. If you are using a Microsoft@ Windows based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Apple@ Mace OS based notebook: In System Preferences, open Display and select Video Mirroring “On Adjust the “Tracking ” to correct it. Refer to the “Image” section for more information. Change the display color depth settings on your computer Use “Frequency” to make an adjustment. Refer to the ” Image” section for more information. Check and reconfigure the display mode of your graph ics card to make it compatible with the projector. Make sure the lens cap is removed. Adjusts the focus ring on the projector lens. Make sure the projection screen is within the required distance of 4.9 to 32.7 feet (1.5 to 10.0 meters) from the projector. Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom ” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox(LBX) format DVD title, please change the format to Letterbox(LBX) in the projector OSD.

****** Page 38 ****** 28 9 10 11 Image is too small or too large Image has slanted sides Image is reversed Adjust the zoom ring on the top of the projector. Move the projector closer to or further from the screen Press “MENU” on the remote control or on the control panel. Go to ” Image –> Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen. Press the “Keystone ” on the OSD or the remote control until the sides are vertical. Select “Image –> Projection” on the OSD and adjust the projection direction. Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. When the lamp reaches the end of its useful life, it will burn out and may make a loud popp ing sound. If th is happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp section.

****** Page 39 ****** OSD Messages Condition Message 29 Message Reminder Fan Fail – the system fan is not working Fan Fail. Lamp will automatically turn off soon. Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Projector Overheated. Lamo will automaticallv turn off soon, Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the end of its useful life in full power operation. Replacement suggested!

****** Page 40 ****** 30 LED & Alarm Definition Listing LED Messages Message Power Plug Stan dby Power button ON Lamp retry Cooling state Power button OFF: Cooling completed; Standby Mode Firmware Download Thermal Switch error (T 1050C) (Lamp Over Temperature) OSD shows “Projector Overheated” Thermal Switch error (T 2 1050C) (Lamp Over Temperature) OSD shows “Projector Overheated” Fan lock error OSD shows red “Fan Fail, Will automatically turn off soon” Lamp error (Lamp, ballast) Color Wheel fail Lamp LED Red Flash ON to OFF IOOms ON ON 0.5 second H(ON), 0.5 second L(OFF) flashing Temp LED Red Flash ON to OFF 100ms ON ON ON 0.5 second I-I(On), 0.5 second L(Off) flashing Power LED Red Flash ON to OFF IOOms ON 0.5 second H(ON), 0.5 second L(OFF) flashing ON ON Blue ON 0.5 second H(On), 0.5 second L(Off) flashing ON ON ON ON ON ON

****** Page 41 ****** 31 Replacing and cleaning the dust filters Replacing the dust filters 1 2 3 4 5 Turn the projector off then unplug the power cord. Pull the both sides dust filters out. (Illustration #1) Clean or replace the dust filter. To put the dust filters back, reverse the previous step When dust filters are implemented, please set the system to be high altitude mode. (Settings: Menu->Management->High Altitude->On) Note: When the dust filters are installed, please make sure the system is at high altitude mode. (Illustration #1) Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. (Normally 1000 hours is recommended, clean period will be depending on actual environment) Please find following steps for cleaning procdure: 1 2 To clean the dust filters, use a small vacuum cleaner designed for computers and other office equipments. It also can be cleaned by water. (Illustration #2) If the dirt is difficult to remove or the filter is broken, please contact your local dealer or service center to obtain a new filter. Dust Filter (Illustration #2)

****** Page 42 ****** 32 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp The projector will detect the lamp life. You will be shown a warning message Lamp is approaching the end of its useful life in full power operation. Replacement Suggested! ” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp 5 To Change the Lamp 3 2 4 1 2 3 4 5 6 7 8 Turn off the projector by pressing the power button. Allow the projector at least 30 mins to cool down. Disconnect the power cord. Remove the two screws on both sides of the projector at the same time. (Illustration #1) Push and slide the top cover towards the direction of the lens. (Illustration #2) Open the top cover. (Illustration #3) Remove the two screws that secure the lamp moduleO and pull up the lamp #4) Pull out the lamp module by force. (Illustration #5) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

****** Page 43 ****** 33 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 3 Secure the ceiling rod using the appropriate type of four-cylinder screws. o O O

****** Page 44 ****** 34 3 4 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. 1 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod.

****** Page 45 ****** 5 35 Adjust the angle and positioning as necessary. o 300 360′ Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models H6500Æ-140/HE-802 Screw Type B Washer Type Diameter (mm) 3 Length (mm) 25 Large E Small SCREW SPEC. M3 x 10 mm o O 160.0 mm

****** Page 46 ****** 36 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption Operating temperature 1/0 connectors DLP@ Native: 1080P (1920 x 1080), Maximum: UXGA (1600 x 1200), WSXGA+ (1680K 1050) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA+ NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/KI/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Auto, 4:3, 16:9, L Box 1.07 Billion colors F/ 2.55-2.86, f = 22.37mm – 26.73mm, manual zoom lens 38″ (96 cm) -300″ (762 cm) 4.9′ (1.5 m) 32.7′ (10.0 m) (1.50 – 1.80:1) 30k – IOOkHz 50 – 85 Hz 240 W user-replaceable lamp +1- 15 degrees 2.54kg (5.61bs) 269 mm x 205.6 mm x 95.5 mm (10.6″ x 8.1 ” x 3.8″) AC input 100 – 240 V, 50 – 60 Hz 305W ± 10% for normal mode 245W ± for ECO mode StandbY< IW 50C to 350C / 4 IOF to 950F Power socket xl VGA input xl Composite video xl 3 RCA Component video xl HDMI x2 USB x 1: for remote computer control DC Jack xl ****** Page 47 ****** Standard package contents 37 AC power cord xl VGA cable xl Remote control xl Batteries x2 (for remote control) User's Gu ide (CD-ROM) xl Qu ick start guide xl Security card xl Carrying case xl * Design and specifications are subject to change without notice. ****** Page 48 ****** 38 Compatibility modes A. VGA Analog 1 VGA Analog – PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV(G3) Resolution 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1152×864 1152×864 1152×864 1280×1024 1280K 1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1 152×870 1280×960 1024×768 V.Frequency [Hz] 60 72 75 85 56 60 72 75 85 60 70 75 85 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 H.Frequency [KHz] 31.5 37.9 37.5 43.3 35.1 37.9 48.1 46.9 53.7 48.4 56.5 60.0 68.7 63.8 67.5 77.1 64.0 77 .o 80.0 91.1 60.0 75.2 65.3 75.00 31.5 34.9 37.9 48.4 68.7 75.2 60.3 ****** Page 49 ****** 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WSXGA+ VGA Analog Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Resolution 1280×768 1280×768 1280×768 1280×720 1280×800 1440×900 1680×1050 1366×768 1920×1080 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 Component Signal B. HDMI Digital HDMI – PC Signal Modes VGA SVGA XGA Resolution 720×480 720×576 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 Resolution 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 1024×768 V.Frequency [Hz] 59.94(29.97) 50(25) 59.94 50 60 50 60(30) 50(25) 23.97/24 60 50 V.Frequency [Hz] 60 72 75 85 56 60 72 75 85 60 39 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 55.9 65.3 47.7 67.50 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27 67.5 56.3 H.Frequency [KHz] 31.5 37.9 37.5 43.3 35.1 37.9 48.1 53.7 48.4 ****** Page 50 ****** 40 2 SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV(G3) 1024×768 1024×768 1024×768 1152×864 1152×864 1 152×864 1280×1024 1280×1024 1280×1024 1280K 1024 1280×960 1280×960 1400×1050 1600K 1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 HDMI Extended Wide timing Modes WXGA WSXGA+ Resolution 1280×768 1280×768 1280×768 1280×720 1280×800 1440×900 1680×1050 1366×768 1920×1080 70 75 85 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 56.5 60.0 68.7 63.8 67.5 64.0 77.0 80.0 91.1 60.0 75.2 65.3 75.00 31.5 34.9 37.9 48.4 68.7 75.2 60.3 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 55.9 65.3 47.7 67.50 ****** Page 51 ****** 3 HDMI -Video Signal Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Grap hic source monitor range limits ADC TMDS Resolution 720×480(1440×480) 720×480 720×576(1440×576) 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 Horizontal scan rate: Vertical scan rate: Max. pixel rate: Max. frequency: V.Frequency [Hz] 59.94(29.97) 59.94 50(25) 50 60 60(30) 50(25) 23.97/24 60 41 H.Frequency [KHz] 15.7 31.5 15.6 31.3 45.0 37.5 33.8 28.1 27 67.5 56.3 30k-100kHz 50-85Hz 170MHz 200MHz ****** Page 52 ****** 42 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 53 ****** 43 Remarque Ilintention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification ME61 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. List of applicable countries Th is device must be used in strict accordance with the regu lations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 54 ****** acer Acer Incorporated 8F. 88, Sec. 1. Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan, R.O.C Declaration of Conformity we, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221,Taiwan, R.O.C. Contact Person: Mr. Easy Lai, And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, acer.it Hereby declare that: Product: Trade Name: Model Number: Machine Type: Projector Accr MIP1108 H6500/E140/HE-802 Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all thc necessary steps have bccn taken and arc in force to assure that production units of the same product will continue comply with the requirements- EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards: EN55022, AS/NZS CISPR22, Class B EN55024 EN61000-3-2 A EN61000-3-3 Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonizæd standard: EN60950-l RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment – Thc maximum concentration values of the restricted substances by weight in homogenous material are: Lead Mercu Hexavalent Chromium O. I % POI brominated Bi hen Is BB's POI brominated Di hen I Ethers PBDE's Cadmium 0.1% 0.01% Directive 2009/125/EC with regard to establishing a framework for the setting of ccodcsign requirements for cncrky-rclatcd product. ****** Page 55 ****** Acer Incorporated 8F. 88, sec. 1. Xintai 5th Xizhi, New Taipei City 221, Taiwan, R.O.C. The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: Article 3.1(a) Health and Safety EN60950-1 EN62311 e Article 3.10) EMC EN301 489-1 EN301 489-17 Article 3.2 Spectrum Usages EN300 328 – EN301 893 (Applicable to 5GIlz high performance RLAN). Year to begin affixing CE marking 2011. asy Lal an ager Regulation Center, Acer Inc. Aug. 24, 2011 Date ****** Page 56 ****** acer Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel 254-298-4000 Fax : 254-298-4147 wvnv.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.; Fax No.: DLP Projector MIP1108 1-16500/E140/HE-802 Acer America Corporation 333 West San Carlos St. San Jose, CA 95110 Acer Representative 254-2984000 254-2984147


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ACER M1P1108 HE-802 (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.